Bureau Technique

TECHNICAL Instruction / 9650-0004 V4
Product involved: / First G1 (731), Steamax G2 (735), Steamup (745), Steamup i-G5 (740), Evolution G4 (746), Evolution i-G5 (741), Premium S3 (760), Magic S4 (755), Magic i-S5 (750), Magic i-S6 (765), LauraStar X1 (766) / Page: 8
Items involved: / 498.0008.750 iron for i-S5 230V/800W
497.0008.750 Cliick iron for i-S5 230V/800W
498.0608.750 iron for i-S5 120V/600W
497.0001.755 iron for S4-S3 230V/800W
496.0001.755 iron (OM 2008) for S4-S3 230V/800W
498.0601.755 iron for S4-S3 120V/600W
498.0008.740 iron for i-G5 230V/800W
497.0008.740 Cliick iron for i-G5 230V/800W
498.0608.740 iron for i-G5 120V/600W
497.0001.745 iron for G4 230V/800W
496.0001.745 iron (OM 2008) for G4 230V/800W
498.0601.745 iron for G4 120V/600W
497.0001.735 iron for G2 230V/800W
497.0001.731 iron for G1 230V/800W
498.0008.765 Liight iron for i-S6 and X1 230V/800W
120.0030.750 Water reservoir S range
New items: / none / Part: iron
Valid since appliance number: / All appliance are involved / Date: 26.05.2008
Subject: / What to do when an iron makes a big jet of steam or is spitting drops of water
Specific Tools: / none / Informative only

TO AVOID ELECTRICAL SHOCK, SWITCH THE ON/OFF SWITCH TO OFF AND PULL THE PLUG FROM RECEPTACLE BEFORE PERFORMING ANY SERVICE OR MAINTENANCE
PRESSURE MUST BE DRAIN AWAY BEFORE PERFORMING ANY MAINTENANCE ON BOILERS
Symptoms: what to do?

Symptom: water is leaking from the iron like a shower: S range only (S3, S4, i-S5, i-S6) and X1:

The customer is complaining because some water leaks from the iron like a showereven if he had rinsed regularly the generator as shown in the owner manual. The trouble happens only when the machine is switched off for a long period (more than ~8 hours) and he is re-used for a new ironing session.When the generator is ready (green light is on, indicating that the steam is ready), the customer activates the steam function for the first time and water leaks from the iron.

The problem disappears completely after several long jets of steam.

Example of a big jet of steam associated with a leak of water like a shower

The water level in the boiler is too high (boiler must be filled with only 0.4liter of water). Trouble is coming from a leakage of the boiler due a bad waterproof of the tube of the self priming system when bonded at the bottom of the water reservoir.

  • Check the water reservoir: if there is a leak coming from the fitting as shown at the picture (please, see below), replace it by a new one (120.0030.750).
  • Drain away the pressure inside the boiler and rinse the boiler 2x with warm tap water only. Then, check the appliance before send it back to the customer.

Symptom: big jet of steam (sometimes dirty)

The boiler is full of deposit and water is saturated of impurity (salt and/or mud)

  • Rinse 2x the boiler with warm tap water only

Temperature of the soleplate is too low

  • 1stCheck power supply of the iron (wiring from generator to iron)
  • 2ndOr change iron’s thermostat

Example of a big jet of steam

Symptom: the iron is spitting drops of water (some small drops of water on clothes/cover)

Temperature of the soleplate is too low

  • 1stCheck power supply of the iron (wiring from generator to iron)
  • 2ndOr change iron’s thermostat

Temperature of the soleplate is OK: the anti-calefaction layer inside the soleplate is damaged and out of order

  • Change the soleplate

Example of some drops of water on clothes/cover


Soleplate’s heating control to be measured when the iron control lever is on MIN, oo, ooo or Max position:
MIN: 130 to 150°C (266 to 302°F)
oo150 to 170°C (302 to 338°F)
ooo180 to 200°C (356 to 392°F)
MAX200 to 220°C (356 to 428°F)
Temperature measurement can be done with a “K” probe as shown:

Process for Premium S3 (760), Magic S4 (755), Magic i-S5 (760), Magic i-S6 (765), LauraStar X1 (766), Steamup G4 (745), Steamup i-G5 (740), Evolution G4 (746), Evolution i-G5 (741), First G1 (731), Steamax G2 (735)
  1. Switch the appliance OFF.
  1. For S3, S4, i-S5, i-S6 and X1 only: check the water reservoir. Does the reservoir have a leakage as shown in page 3? If yes, replace it by a new one (120.0030.750).
  1. Rinse 2x the boiler with tap water only. Appliance must be cold before start to proceed.
  1. Replace the drain cap and switch the appliance ON
  1. Wait until appliance is ready and check if the iron is still spitting or doing drops of water. Does the problem have been solved?

1)If yes, problem is resolved and after a complete final checking, appliance can be send back to customer.

2)If no, check the temperature of the soleplate.

Soleplate’s temperature checking
  1. If temperature is to low (or soleplate is cold), check if there is a disconnected wire along the wiring from generator to the 4 positions terminal block (425.0000.703) inside the iron. If the wiring is OK, change the iron thermostat (401.0000.750) Thermostat 0-240°C.

What to do when the temperature of the soleplate is too low?
1) Check the plug of the iron inside the generator / 2) Connectors must be together
3) Open the iron as shown / 4) Check if the wires are well connected
If the connectors inside the generator and the wires on the 4 positions terminal block have been controlled but the soleplate still remains cold, change the iron’s thermostat
Thermostat (401.0000.750) on soleplate / Removing/substitution of the thermostat

3)Ifsome spitting/drops of water after having check the wiring and changed thermostat are remaining, it means that the anti-calefaction layer inside the steam passage of the soleplate is damaged and can’t be repaired. In that case, it is possible to exchange the soleplate only or if required, to replace the complete iron by a new one.

  1. After having exchanged the soleplate/iron, make a complete final checking of the appliance before to send it back to the customer.

Spare parts & article number

Water reservoir for S range

120.0030.750 Water reservoir S

Iron’s thermostat

401.0000.750 thermostat 0-240°C

Beta soleplates:

466.0000.765 Beta LIIGHT soleplate 800W 230V/50Hz

466.0600.765 Beta LIIGHT soleplate 600W 120V/60Hz

402.0000.750 Beta soleplate 800W 230V/50Hz

402.0600.750 Beta soleplate 600W 120V/60Hz

Beta irons:

498.0008.750 iron for i-S5 230V/800W

497.0008.750 Cliick iron for i-S5 230V/800W

498.0608.750 iron for i-S5 120V/600W

497.0001.755 iron for S4-S3 230V/800W

496.0001.755 iron (OM 2008) for S4-S3 230V/800W

498.0601.755 iron for S4-S3 120V/600W

498.0008.740 iron for i-G5 230V/800W

497.0008.740 Cliick iron for i-G5 230V/800W

498.0608.740 iron for i-G5 120V/600W

497.0001.745 iron for G4 230V/800W

496.0001.745 iron (OM 2008) for G4 230V/800W

498.0601.745 iron for G4 120V/600W

497.0001.735 iron for G2 230V/800W

497.0001.731 iron for G1 230V/800W

498.0008.765 Liight iron for i-S6 and X1 230V/800W

1