Room No: 831 BuildingChemistry C1
PI(s) in charge of areaProf. Alan C. Spivey
Complete for each lab and send copy of completed form to Jan de Abela-Borg (
Please report any incidents / accidents relating to this procedure to Jan
What is the hazard(s) or hazardous activity? / Rotary Evaporator - Use, Including Chiller-Cirulator & Membrane Pump Operation
Who may be affected? / Students and staff in lab Cleaners Maintenance staff Engineers
Other- state who technicians
How will injury occur? / implosion from glassware under vacuum; chemical contact/exposure due to spillage or pump exhaust; leaks from chiller unit; faulty electrics; fire.
What is the likely outcome? / cuts from broken glass; irratation to eyes, skin and respiratory tract from pump exhaust or chemical spillage;slip/fall; electrocution; burns.
What control measures are in place? / check glassware for cracks before use; protective coating on condensor and trap to minimise implosion hazard; exahust piped into fumehood; wear gloves, labcoat and eye protection; electrical equipment regularly safety checked/serviced; chiller cut-out mechanism to prevent flooding.
WHAT MIGHT HAPPEN?
Tick all boxes that apply / WHAT EMERGENCY PROCEDURES ARE REQUIRED?
Clothing contamination / Remove and wash before re-use
Other - please describe
Spillage in a fume hood / Describe procedure to follow below
a.Insignificantml:
b. Significant >ml:
Spillage outside a fume hood / Describe procedure to follow below
a.Insignificant < 25ml: / clean/dispose acording to MSDS.
b.Significant (i.e. will cause immediate harm) 25ml: / contain; alert others; ventilate area; dispose acording to MSDS.
Skin/eye contact: / Wash with copious amounts of running water for 20 mins
Other -please describe
Cut/wound: / Encourage to bleed by washing with warm water. Then wash with copious amounts of running water for 20 mins.
Report to Occupational Health with MSDS
Inhalation / Remove to fresh air
Other
Fire: / Extinguisher Type – please describeCO2
Sand
Other - please describe
Failure of other engineering control measure: / turn off power.
Other – Please give details
I have read and understoodthis risk assessment, received the relevant training and will abide by the health and safety procedures for the above.
Name / Date / SignatureJan de Abela-Borg, Faculty Safety ManagerChemistry Dept September 2008