SIKA INDUSTRY - FFI

Project Information FormforSikaTack® Panel

PLEASE PROVIDE AS MUCH INFORMATION AS POSSIBLE,
SINCE THIS WILL HELP US TO PROVIDE A FAST AND COMPREHENSIVE ANSWER.
Please be aware of Sika Joint Calculator also available for SikaTack® Panel System. Here you can get fast answers in simple steps:

GENERAL PROJECT INFORMATION

Project Name: / City/Country:
Panel area: / m2
Company: / Key contact:
Phone:
e-mail: / @

COMPANY CONTACT NAMES

Name / Position / Telephone / E-mail address
Project Manager / @
Design Manager / @
Quality Manager / @

pARTIES INVOLVED IN THE PROJECT

Design / Engineering office:
Consultant:
Structural bonding by:

SERVICES REQUESTED FROM SIKA

Structural joint calculation/approval / Design review & approval / Guarantee certificate
Reference: / AbZ Z-10.8-347 / BBA 05/4218 / EOTA ETAG002 / ASTM
Other/special requirements:

drawings and OTHER RELEVANT INFORMATION SUBMITTED WITH THIS FORM

Drawings / Number of pages: / Description: / 1.
2.
Other data / Number of pages: / Description: / 1.
2.

For electronic data transfer please use our project website:

design details

External application / Internal application
Dead load mechanically supported / Dead load not mechanically supported (transferred by the bonding joints)
Vertical panels / Sloped panels / Outward slope angle α0: / ° /
Inward slope angle αi: / °
Service wind load (SLS): / kN/m2 / Other loads (SLS): / kN/m2
Design wind load (ULS): / kN/m2 / kN/m
Panel temperatures: / °C / maximum / °C / minimum
Profile / Frame temperatures: / °C / maximum / °C / minimum
Building shell / Wall temperatures: / °C / maximum / °C / minimum
Bonding temperature: / °C / approx.

panel

Panel type: / Producer:
Largest panel: / Max. width: / mm / Max. height: / mm
Number of vertical profiles bonded: / Max. distance: / mm
Highestpanel: / Max. width: / mm / Max. height: / mm
Number of vertical profiles bonded: / Max. distance: / mm
Panel thickness: / mm
Panel weight: / kg/m2
Thermal expansion coefficient: / x 10-6 1/K
Other:

vertical profiles (as SUPPORT FRAME for panels)

Material: / Aluminium / Stainless Steel / Wood / Other:
Vertical profiles: / can slide in horizontal direction
cannot slide (are fixed) in horizontal direction

building shell / Wall (as support structure for vertical profiles)

Material: / Aluminium / Steel / Brickwork
Reinforced concrete / Other:
Thermal expansion coefficient: / x 10-6 1/K
Building shell / Wall is: / Covered by insulation layer
Not covered by insulation layer

adhesive to be used

SikaTack® Panel / SikaTack® Panel-50

REMARKS/ADDITIONAL INFORMATION

SIKA CONTACTS

After all requested information has been filled in please send this form together with drawings and other data to:

Sika Services AG – Building Systems & Industry

Tueffenwies 16

CH-8048 ZURICH

Switzerland

Phone: +41 58 436 5633

Fax: +41 58 436 5407

E-Mail

to: /

For adhesion test requests please refer and fill in Sika Sample Submittal Information Form for SikaTack Panel System.



SIKA INDUSTRY - FFI
Project Information Form for SikaTack® Panel Systems
24.02.2017/ REVISION 3
Project Information Form_SikaTack Panel_REV03.docx

1/3