TRANSITION PROGRAM WORKSHEET
STUDENT NAME & BSU ID NUMBER / ADVISOR
Engineering Technologycourses / Cr. / sub/trans / Substitute/Transferred Courses / Cr. / Sem/Yr / Grade
I. Required Technical Courses-21 credits
TADT 1210 Materials and Processes - Forming / 3
TADT 1220 Materials and Processes - Separating / 3
TADT 1315 Energy and Power Technology / 3
TADT 1350 Electrical/Electronic Technology / 3
TADT 1460 Technical Graphics / 3
TADT 2250 Construction Technology / 3
TADT 2370 Automation Technology / 3
II. Required Professional Core-28 credits
TADT 3267 Engineering Cost Analysis / 4
TADT 3885 Technical Sales, Service, and Training / 4
TADT 4385 Sustainability Emerging Tech / 4
TADT 4537 Industrial Design/Innovation / 4
TADT 4875 Facilities Management / 4
TADT 4878 Quality Assurance / 4
TADT 4897 Project Management / 4
III. Required Foundations Courses-13 credits***
Math Requirements-6 credits
Science Requirement-7 credits
IV Areas of Emphasis-complete A. or B.
A. Construction Management-Select 16 credits
TADT 3250 Print Reading Project Documentation / 4
TADT 3260 Project Bidding and Estimating / 4
TADT 4259 Construction Management / 4
TADT 4260 Computerized Construction Estimating / 4
TADT 4777 Adv Topics in Tech/Construction / 4
TADT 4970 Internship (4 credits) / 4
B. Manufacturing Management-Select 16 credits
TADT 3217 Material Science & Metallurgy / 4
TADT 3260 Project Bidding & Estimating / 4
TADT 3700 Production Planning & Control / 4
TADT 3878 Industrial/Engineer Production Studies / 4
TADT 4777 Adv Topics in Tech/Manufacturing / 4
TADT 4970 Internship / 4
*** Required Foundations Courses – Students are required to take 6 credits of Math at the 1100 or higher level. Students are encouraged to take statistics and calculus. In addition, students are required to take 7 credits from among the Physics, Chemistry, or Physical Science (specifically, SCI 1110 and SCI 1120) courses that are approved to fulfill Liberal Education Goal Area 3. Other Goal Area 3 courses may be substituted if approved by the Chair of the Department of Technology, Art and Design. Students are encouraged to take a combination of Physics and Chemistry.
Signatures should be completed if form is included in graduation plans packet to be submitted to Records.
Faculty Advisor Signature______Date______
TAD Department Chair Signature______Date______
Industrial Technology BS- 81 creditsprevious program with IT courses/2.25 GPA required
TRANSITION PROGRAM WORKSHEET
STUDENT NAME & BSU ID NUMBER / ADVISOR
Engineering Technology courses / Cr. / sub/trans / Substitute/Transferred Courses / Cr. / Sem/Yr / Grade
I. REQUIRED TECHNICAL COURSES-32 credits
IT 1210 Materials And Processes - Forming / 4
IT 1220 Materials And Processes - Separating / 4
IT 1310 Mechanical Power / 2
IT 1350 Electronic Technology / 4
IT 1460 Technical Graphics / 3
IT 2250 Construction Technology / 2
IT 2370 Automation Technology / 3
IT 3310 Fluid Power / 3
IT 4537 Industrial Design / 3
Select other courses with advisor
II. REQUIRED PROFESSIONAL CORE-18 credits
IT 3870 Technical Sales/Presentations / 2
IT 3880 Human Resource Development / 2
IT 3890 Material Handling And Plant Layout / 2
IT 4877 Industrial Maintenance And Safety / 3
IT 4878 Quality Assurance / 3
IT 4890 Industrial Organization And Leadership / 3
IT 4897 Project Management / 3
III. Required Foundations Courses-13 credits***
Math Requirements-6 credits
Science Requirement-7 credits
A. Construction Management
Block 1-Required12credits
IT 3240 Construction Materials And Practices / 3
IT 3250 Print Reading and Project Documentation / 3
IT 3260 Project Bidding And Estimating / 3
IT 4259 Construction Management / 3
Block 2:Select 6 semester credits / IT 4970 Internship or select among ACCT and BUAD non-liberal Education courses.
B. Manufacturing Management
Block 1-Required12 credits
IT 3460 Parametric 3-D Modeling (3 credits) / 3
IT 3877 Engineering Problem Solving (3 credits) / 3
IT 3879 Performance Measurement (3 credits) / 3
IT 4870 Production Management (3 credits) / 3
IT 4880 Total Quality Management (3 credits) / 3
Block 2:Select 6 semester credits / IT 4970 Internship or select among ACCT and BUAD non-liberal Education courses.
*** Required Foundations Courses – Students are required to take 6 credits of Math at the 1100 or higher level. Students are encouraged to take statistics and calculus. In addition, students are required to take 7 credits from among the Physics, Chemistry, or Physical Science (specifically, SCI 1110 and SCI 1120) courses that are approved to fulfill Liberal Education Goal Area 3. Other Goal Area 3 courses may be substituted if approved by the Chair of the Department of Technology, Art and Design. Students are encouraged to take a combination of Physics and Chemistry.
Signatures should be completed if form is included in graduation plans packet to be submitted to Records.
Faculty Advisor Signature______Date______
TAD Department Chair Signature______Date______