Abstract Title

First Author1, Second Author2, Third Author1

1 Affiliation – Institute A, Address, Country

2 Affiliation – Institute B, Address, Country

Corresponding author (name underlined): Name of the corresponding author

E-mail:

Phone Number, Fax Number in international form

Introduction

Experimental

Results and Discussion

Conclusions

Acknowledgements

References

References to other work should be consecutively numbered in the text using square bracketsand listed by number in the Reference list. See the following for an example of acceptable format:

  1. H. Sung, Y. Wang, C. Wan: J. Elechem. Soc. 145 (1998) 1207.
  2. H. Strehlow: Electrode Potentials in Non-aqueous Solvents; in: The Chemistry of Non-aqueous Solvents, Vol. 1 (J.J. Legowski, ed.). Academic Press, New York 166, page 157.
ABSTRACT TEMPLATE CONTINUES ON THE PAGE 2

Figures and Captions of Figures

Figures will be published in black and white. The line drawings should be made with careful lettering, large enough to remain legible after reduction for printing.


See the following for an example of acceptable format. Please, place the figure into text with an appropriate legend, e.g.:

Fig. 1 Cyclic voltammogram of Brij 56 – 1M KCl in water (50:50 wt. %) on the platinum electrode (1 mm diameter; 5 mV.s-1 scan rate).

Tables

See the following for an example of acceptable format. Please, place the table into text with an appropriate legend, e.g.:

Table 1 Half-wave potentials of ferrocene (medians) measured vs. methanolic SCE orPMMA-Cd electrode, their difference computed according to the eq. 1 and relative standard deviation.

Solvent / D0 (Fc) / EP (Fc)
vs. PMMA-Cd-Cd2+ / EP (Fc)
vs. SCE / E (PMMA-Cd-Cd2+)
vs. SCE
(molar ratio) / (cm2.s-1) / (V) / (V) / (V)
PC / 6.5 . 10-6 / 0.787 / 0.348 / -0.439 ± 0.013
PC-EC (1:1) / 6.4 . 10-6 / 0.766 / 0.333 / -0.433 ± 0.021
PC-DMC (1:1) / 1.4 . 10-5 / 0.821 / 0.368 / -0.453 ± 0.013
DMC-EC (1:1) / 1.6 . 10-5 / 0.782 / 0.374 / -0.408 ± 0.013