Advantech’s Launches Two New High Performance Automation Controllers
(Cincinnati, OH –September 2012) – To meet the increasing demands of today’s industries, the Industrial Automation Group of Advantech has launched two new open architecture embedded controllers. The UNO-2184G is a high-end, high performance model designed for applications that require a large amount of graphical processing power whilst the UNO-2174G is a mid-end controller for industries that require faster performance, but not the 3D capabilities of the 2184G. Both benefit from the industrial design technique of isolated chassis and logic grounds for increased stability and reliability.
The UNO-2184G comes with a high performance Intel® Core i7-2655LE processor and the UNO-2174G comes with an Intel® Celeron® 847E processor. Both models can support up to 16G DDR3 RAM (with 4G/8G RAM onboard or built-in), a dedicated Intel HD graphics processor, and are completely fanless enabling them to operate in temperatures as low as -10℃ and as high as 60℃.
The core i7 CPU on the UNO-2184G supports AMT 7.0, which is hardware-based technology for remotely managing and securing PCs regardless of whether the machine is powered on or if an operating system is installed of functional.
Both models come with the following hardware configuration: three display ports (DVI, HDMI and Display Port [allowing two simultaneous connections]), six USB 2.0 ports, two Mini PCIe sockets and SIM card slot card ready for additional 3rd party cards such as WLAN, 3G, GPRS, and GPS; four Gigabit LAN ports which support teaming functionality such as fault tolerance, link aggregation and load balance features; dual COM ports that support RS-232,422 & 485 with automatic flow control and support for any baud rate; and, using the powered e-SATA port, a backup hard drive or USB device can also be connected.
To further aid performance and usability, the UNO-2184G and 2174G come with a dedicated Intel VT-D chipset which allows system administrators to install multiple operating systems on a single device. Each virtual machine can then take control of the parts of the hardware that it needs to perform its tasks.
For more information or to purchase, please contact Advantech directly or your regional Advantech authorized distributor.
Advantech Corporation, Industrial Automation Group – With the theme of Intelligent Automation, Seamless Integration, the Industrial Automation Group (IAG) of Advantech Corporation is a pioneer in intelligent Automation technology. By combining connectivity, flexibility, ruggedness and being at the leading-edge of Internet of Things technology, IAG offers product offerings from Intelligent HMIplatforms, Industrial Ethernet, Wireless Communication, Automation Controllers, Automation Software, Embedded Automation Computers, Distributed I/O Modules, Wireless Sensor Network Solutions, Plug-in I/O, and Industrial Communication solutions for a wide array of industries. With more than 20 years of experience in providing a full range of products to different vertical markets, the Industrial Automation Group is proving to be a global leading Automation Product and Services provider. US operations for the Industrial Automation Group are based in Cincinnati, OH (800-205-7940). Advantech Corporation, Industrial Automation Group, 11380 Reed Hartman Highway, Cincinnati, OH 45241. Website: www.advantech.com/ea. Email: .