CIT 211 – Exam
Choose the right answer from Multiple Choice:
1- What is the easiest way to check the amperage requirements for a laptop?
(a)Go into the BIOS.
(b)Look at the battery.
( c) Open Device Manager.
(d) Go to the manufacturer's Web site.
2- What is the maximum number of PCMCIA Type II cards that can be installed in a single Type III slot without the use of an adapter?
(a) 1
(b) 2
( c)3
(d) 4
3- Which two devices are typically hot swappable by using a single modular bay on a laptop? (Choose two.)
(a) modular CD-ROM drive
(b) modular floppy disk drive
( c)modular hard disk drive
(d) IDE interface hard disk drive
(e) modular keyboard
4- Which property of mobile processors enables them to have lower clock speed in comparison to desktop processors?
(a) lower power consumption
(b) address bus
( c)level 1 (L1) cache
(d) data bus width
5- Which of the following features CANNOT be controlled using a Function key on a laptop computer?
(a) mute speaker volume
(b) mute microphone volume
( c)increase speaker volume
(d) decrease speaker volume
6- Which display device uses TFT technology?
(a) cathode ray tube (CRT)
(b) dual-scan
( c)active-matrix
(d) passive-matrix
7- Which component of an LCD display illuminates the display?
(a) the inverter
(b) the backlight
( c)the LCD panel
(d) the LCD logic board
8- You need to copy an EFS-encrypted file. The file will be copied to an NTFS volume that does not implement EFS.What is the state of the file?
(a) The original version of the file is decrypted. The new version of the file is encrypted.
(b) The original version of the file remains encrypted. The new version of the file is encrypted.
( c)The original version of the file remains encrypted. The new version of the file is decrypted.
(d) The original version of the file is decrypted. The new version of the file is decrypted.
9- Which steps should you perform? (Choose two. Each correct answer represents part of the solution.)
(a) Format the hard disk by using FAT16.
(b) Format the hard disk by using FAT32.
( c)Format the hard disk by using NTFS.
(d) Enable the encryption feature.
(e) Create a strong password verification policy.
10- Which attribute is usually enabled on a factory recovery partition?
(a) hidden
(b)encrypted
( c)archived
(d) read-only
11- Which printing technology transforms solid ink to liquid ink for printing?
(a) dot matrix
(b) liquid inkjet
( c)phase-change
(d) dye-sublimation
12- A user contacts you stating that his laptop is making a weird buzzing noise. When you examine the laptop, you notice that the buzzing noise is coming from the bottom of the display assembly. Which device should you probably replace?
(a) the motherboard
(b) the display screen
( c)the inverter board
(d) the hard drive
13- Which of the following options is a way to increase security in a wireless network?
(a) SSID broadcast
(b) war driving
( c)rogue access points
(d) MAC filtering
14- A user contacts you regarding his mobile device. He wants to ensure that his mobile device automatically synchronizes with his desktop computer. In addition, he wants to make sure that the synchronization occurs wirelessly at the fastest speed possible. What should you tell him to do?
(a) Implement push synchronization over an 802.11 connection.
(b) Implement pull synchronization over an 802.11 connection.
( c)Implement push synchronization over a Bluetooth connection.
(d) Implement pull synchronization over a Bluetooth connection.
15- You need to configure an iPhone with iOS 6 to connect to your company's 802.11g network. You navigate to the Settings. What should you do NEXT?
(a) Enable Airplane Mode.
(b) Enable Personal Hotspot.
( c)Enable Bluetooth.
(d) Enable Wi-Fi.