Office: Engineering Technology Dept. Time: MWF 8-8:50 A.M. (CLASS I)

ENGR 2332: Mechanics of Materials

Instructor: Leticia AnayaFall II 2010

Office: Engineering Technology Dept. Time: MWF 8-8:50 A.M. (CLASS I)

Phone: 940-565-2366Time: MWF 9-9:50 A.M. (Class II)

Office Hours: MW 10-12 p.m. Meeting Place: b185

Email: ab: Tuesday 3-5:50 p.m. F185

Lab: Wednesday 11-1:50 p.m. F185

COURSE DESCRIPTION:

Relationships among loads placed on structural components; shape and size of components; resultant stresses, strains and deflections of components.

COURSE OBJECTIVES: (TAC of ABET Criteria and Program Educational Objectives Supported).

Upon completion of this course, the student should be able to:

1. Understand the concepts of stress and strains, and the influence of loading

direction on deformation. (c,d,f,g,i,l)

2. Understand the impact of applied loads on design. (c,d,f,g,i,l,m

3. Know the final extensions on axially loaded members subjected to tensile or

thermal stresses. (c,d,f,g,i,l,n)

4. Understand the influence of torsinal stresses on deofrmation of circular bars.

(c,d,f,g,i,l,n)

5. Understand shear force and bending moments diagrams. (c,d,f,g,i,l,n)

6. Understand the principal stress based on applied loads. (c,d,f,g,i,l,n)

7. Understand the influence of location of loads on the deflection. (c,d,f,g,i,l,n)

8. Understand the effects of end conditions on deformation. (c,d,f,g,i,l,n)

Student Learning Outcomes: (Course Objectives Supported)

Calculate stress-strains relations for typical engineering applications. (1, 2, 3, 7, 8)

b) Analyze tensile loading of members. (1, 2, 3)

c) Analyze torsion in beams. (1, 2, 4)

d) Analyze beams in deflection. (1, 5, 7)

e) Calculate principal stresses and angular dependence of stress. (6)

f) Evaluate buckling of columns. (1, 6)

g) Analyze columns under compression. (8)

Instructional Objectives:

1. Conditions

a) Students can use pens, paper, calculator and textbooks during lectures.

b) Students are allowed to download lectures from the instructor's website.

c) Students are permitted to use electronic equipment, software and part kits

in the laboratory

2 Criteria:

a) Students are required to attend lectures and laboratory classes.

b) Homeworks and laboratory reports will be turned in on the due date.

c) Student muss pass the laboratory in order to pass the test.

d) Makeup examination will not be given.

3. Outcome Competencies

a) Homework will be used to access understanding of materials covered in

lecture

b) Examination will be used to assess understanding of materials covered

during the semester in both lecture and laboratory.

c)Laboratory reports will be used to assess hands-on application of theory and

use of test equipment and software.

COURSE REQUIREMENTS:

Attendance—Attendance is Mandatory, particularly in the labs. Lectures, videos, labs, class assignments and class discussions contain important information to do well on exams. Attendance will be taken regularly during the labs.

Required Text/Associated Software:

Philpot, Timothy A., Mechanics of Materials: An Integrated Learning System, 2nd Edition, Wiley Publishing Company. Traditional book with WileyPLUS code: 9780470580783.

If you do not want to buy a hardcopy of the book, you can get an electronic copy of the book by buying the WileyPLUS stand alone. The ISBN code is: 9780470528419

Grading Criteria:

Exam 1 15%

Exam 2 15%

Unannounced quizzes 5%

Lab Assignments 30%

Homework 10%

Final 20%

Attendance, Attitude, Class Participation 5%

Missed Exams/Pop Quizzes: Do not count on the instructor to provide you with a make-up exam or make-up pop quizzes. The instructor teaches too many students and too many classes and does not simply have the time to be making up exams for each student. Make-up exams will only be administered under extreme circumstances with a documented university excuse. No make-up pop quizzes will be allowed. At any point of the semester, the instructor can decide to give extra credit assignments and/or pop quizzes.

Assignments: The homework assignments will be done using the WileyPLUS software. The assignments have a deadline. It is the student’s responsibility to meet this deadline. The instructor does not always have the possibility of adjusting the software parameters once they are set.

Expected Grade Distribution:

>= 90 grade points = A

>= 80 and <90 grade points = B

>=70 and <80 grade points = C

>=60 and < 80 grade points = D

< 60 grade points = F

The instructor reserves the right to change this grade distribution at the end of the semester. If any changes occur, the changes will be less stringent that the distribution above.

Disabilities Accommodation:

The University of North Texas complies with Section 504 of the 1973 Rehabilitation Act and with the Americans with Disabilities Act of 1990. The University of North Texas provides academic adjustments and auxiliary aids to individuals with disabilities, as defined under the law. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodations of their disabilities. If you believe that you have a disability requiring accommodation, please see the instructor and/or contact the Office of Disability Accommodation at 940 565-4343 during the first week of class.

COURSE OUTLINE (Tentative— At any time, the instructor deserves the right to substitute material as appropriate for the class)

Class Meets Tuesday and Wednesday / Lecture / Book Chapter / Lab
WEEK 1 / Introduction / No lab
WEEK 2 / Normal Stress Under Axial Loadings,Direct Shear Stress, Bearing Stress, Stressed on Inclined Sections / 1 / M.D. Solids I
WEEK 3 / Displacement, Deformation and Strain. Normal Strain, Shear Strain / 2 / Matlab Tensile Test Analysis
WEEK 4 / Thermal Strain, Tension Test / 2, 3 / Ingstrom Tensile Test, Analysis of Mechanical Properties of Metals
WEEK 5 / Hooke's Law and Poisson Ratio / 3 / Mastan Bridge
WEEK 6 / REVIEW OF CHAPTER 1,2,and 3 and Exam 1 / Strain Gage Application Test
WEEK 7 / Types of Loads, Safety, Allowable Stress Design / 4 / Mastan Static Problems
WEEK 8 / Deformation in axially loaded bars, in system of axially loaded bars, analyzing statically indetermine Structures / 5 / M.D. Solids #2
WEEK 9 / Thermal Effects on Axial Deformation, Stress Concentration, Torsion / 5,6 / Torsion Lab
WEEK 10 / Torsional Shear Strain, Torsional Shear Stress, / 6 / Impact Lab
WEEK 11 / Torsionally Deformation, Power Transmission, Stress Concentration in Circular Shafts under Torsional Loadings, Torsion in noncircular sections, / 6 / Design of Reinforced Concrete Beams
WEEK 12 / Shear and Moment in Beams, Graphical Method for Constructing Shear and Moment Diagrams, Flexure Formula / 7,8 / Moment/Shear Force Lab
WEEK 13 / REVIEW OF CHAPTER 4, 5, 6 and 7, Analysis of Bending Stress in Beams, Exam 2 / Mohr's Circle Lab
WEEK 14 / Stress Concentrations under Bending, Moments of Inertia, Centroids, Stress Transformation / 8 and Appendix A / Flexure Lab
WEEK 15 / Mohr's Circle, Pressure Vesels / 13, 14
WEEK 16 / Final Exam Scheduled for : Thursday, December 16, 2010 from 10:30 a.m. to 12:30 p.m.

Additional Policies and Procedures.

My commitment to the students is to train them to the best of my ability to compete in an ever changing technological world. I understand that these students need to be prepared to compete with students with many other higher educational institutions for positions and opportunities. Because of this, I will strive to ensure that the training that they receive is comparable (and may even be better) to the training that other students receive in other institutions . I also want to inform my students that my commitment to their success extends beyond graduation. I want to inform my students that my commitment in providing this training also extends to the community in which these students will eventually end up working in. Under no condition will I certify a student to be competent when he/she has not proven to have reached the level of competence needed to perform engineering work!

Just like I have a commitment to these students, I also have a set of expectations from these students. I expect the students to show up on time; to attend classes and labs regularly; to be respectful of other students , their teaching assistants, and myself; to turn in their assignments as scheduled, and to be ready to learn each and every time we meet. I expect all students to recognize that the teaching assistant that will be assigned for this class is a student who is working under my supervision. I expect all students to show respect and consideration to the laboratory teaching assistant at all times.

1. All rules relating to academic dishonesty will be enforced in accordance with University policies. Cheating on quizzes, examinations and laboratory assignments, and plagiarism on various papers and reports are types of disciplinary misconduct for which penalties are assessed under the UNT Code of Student Conduct and Discipline. Major responsibility for implementing the University's policy on scholastic dishonesty rests with the faculty. Be advised that the instructor of this course supports and fully implements this policy. The following actions will be taken when evidence of such misconduct is observed. The student will be presented with the evidence of misconduct and given an opportunity to explain same. Based on the outcome of this private conference, the matter will be either dropped or the student will be given a grade of "F" in the course and be referred to the Dean of Students for further counseling and/or disciplinary action.

1. State common law and federal copyright laws protect my lectures. They are my own original expression and I record them at the same time that I deliver them in order to secure protection. Whereas you are authorized to take notes in class thereby creating a derivative work from my lecture, the authorization extends only to making one set of notes for your own personal use and no other use. You are not authorized to record my lectures, to provide your notes to anyone else or to make any commercial use of them without expressed prior permission from me.

1. During the course, handouts will be provided to enhance the presentation of certain concepts. These materials are provided strictly for instructional purposes and may other wise be restricted. There is no authorization for further reproduction of distribution of handout materials beyond that intended to teach the course.

1. This syllabus is subject to change at any time during the semester with changes to be announced in class.

1. Students should schedule at least one hour per lecture hour for study outside class. Students should schedule at least one hour per laboratory hour for outside work to prepare for the laboratory, use of open laboratory hours, and to complete the required laboratory documentation.

1. Grades are based, in part, on the student's ability to communicate. Well written English is expected in all course work and is a factor in laboratory report grades. The student’s ability to orally communicate the results of laboratory exercises and class assignments is also monitored.

1. Each student should retain graded lecture notes, pop quizzes, homework, tests, software-generated files, and laboratory reports to document errors in recorded grades.

1. Requests for review of graded work must be submitted during the lecture in which such work is returned to the students. The request should be accompanied by a written justification of the request including any supporting data.

1. The UNT Catalog procedures on cheating and plagiarism will be vigorously enforced. It is the duty of all students to protect their work so it is not available to others for submission as their efforts. This is especially true of files that are generated on the computer. Students who knowingly allow others to use their work are partners in this unethical behavior.

1. There is no limit to the use of calculators for lecture, labs, pop quizzes, formal tests, or final examination.

1. Challenges to the course grade must be presented within 60 days of receipt of grade notices mailed by the university. This will insure that instructor’s records are still available to allow a review of the assigned grade. You should first discuss your complaint with the instructor. If you wish to carry it further, contact the Program Coordinator by calling (940) 565-2022. To further pursue your complaint, contact the Department Chair at (940) 565-2022, but ONLY after first discussing your concern with the previous two individuals.

1. If appropriate, Material Safety Data Sheets (MSDS) are maintained on file in the department for your review. Access to these documents may be provided by the:

• instructor of this course,
• Program Coordinator, or
• Department Secretary.

Seek initial access through the instructor or Coordinator rather than the secretary.

1. An I (incomplete) grade is given only for extenuating circumstances and in accordance with University and Departmental Policies.