BIL:450
TYP:General Bill GB
INB:Senate
IND:19990203
PSP:Grooms
SPO:Grooms
DDN:l:\s-res\lkg\002trot.jh.doc
RBY:House
COM:Agriculture, Natural Resources and Environmental Affairs Com 20 HANR
LAD:19990512
SUB:Trotline hooks to be capable of passing through three inch long cylinder, Fish and Game
HST:
BodyDateAction DescriptionComLeg Involved
______
House19990518Introduced, read first time,20 HANR
referred to Committee
Senate19990513Read third time, sent to House
Senate19990512Read second time
Senate19990512Committee amendment adopted
Senate19990511Committee report: Favorable with07 SFGF
amendment
Senate19990203Introduced, read first time,07 SFGF
referred to Committee
Printed Versions of This Bill
Ordered Printed on 19990511
Ordered Printed on 19990512
TXT:
Indicates Matter Stricken
Indicates New Matter
COMMITTEE AMENDMENT ADOPTED
May 12, 1999
S.450
Introduced by Senator Grooms
S. Printed 5/12/99--S.
Read the first time February 3, 1999.
[450-1]
A BILL
TO AMEND SECTION 50-13-1180 OF THE CODE OF LAWS OF SOUTH CAROLINA, 1976, RELATING TO PROHIBITIONS REGARDING TROTLINES, SO AS TO REQUIRE THAT TROTLINE HOOKS USED IN LAKES MARION AND MOULTRIE MUST, IN ADDITION TO OTHER REQUIREMENTS, BE CAPABLE OF BEING PASSED THROUGH A THREE-INCH-LONG CYLINDER WITH A ONE-HALF INCH INSIDE DIAMETER, AND TO AMEND SECTION 50-13-1192, RELATING TO NONGAME FISHING DEVICES, SO AS TO RESTRICT FROM TWO TO ONE THOUSAND THE NUMBER OF TROTLINE HOOKS THAT MAY BE USED WITH A COMMERCIAL FISHING LICENSE AND TO REQUIRE THAT THESE HOOKS BE CAPABLE OF BEING PASSED THROUGH A THREE-INCH CYLINDER WITH AN INSIDE DIAMETER OF ONE-HALF INCH.
Amend Title To Conform
Be it enacted by the General Assembly of the State of South Carolina:
SECTION1.Section 50-13-1180(F) of the 1976 Code is amended to read:
"(F)Trotline hooks used in Lakes Marion and Moultrie must have a gap or clearance between point and shank no greater than sevensixteenths inch and must pass through a three-inch-long cylinder with an inside diameter of one-half inch."
SECTION2.Section 50-13-1192(34)(b) of the 1976 Code is amended to read:
"(b)trotlines: two thousand hooks maximum with commercial license. Hooks must have a gap or clearance between point and shank no greater than sevensixteenths inch and must pass through a three-inch-long cylinder with an inside diameter of one-half inch;"
SECTION3.This act takes effect upon approval by the Governor.
XX
[450]1