Silo Applicaton Form (S-AF)

  1. General Information

Date: / Company Name:
Street: / City:
State: / Zip:
Contact Name: / Title:
Phone: / Fax:
E-mail:
Representative:
  1. Material Information

Product Name (i.e. Flour…Cement)
Bulk Density g/cc lb/cu.ft. / Maximum Angle of Repose:
Particle Size: inches mm / Min: / Max: / Average:
Type / Powder Flake Pellet Granular AggregateOther:
Characteristics / Free Flowing Sticky Wet Bridges Rat Holes Corrosive
Other: Hazardous Location
Max Pressure / psi / Max temp inside / °F
  1. Silo Parameters

Outside Construction / Concrete Fiberglass Stainless Steel Carbon Steel
Aluminum Other:
Internal Structure* / Cleanout Cage Agitator Bag House Stiffening Bars
Temp Cable Aeration TubeOther:
Internal Movement* / Yes No If yes, please describe:
  1. Silo Dimensions -Please select: feet meters

Top Section
Flat Dome Cone / Height (HT): / Diameter (DT):
Straight Center Section / Height (HS): / Diameter (DS):
Bottom Section
Flat Dome Cone / Height (HB): / Diameter (DB):
  1. Calibration Points

Full Calibration – 20mA (100%) / Distance measured from sensor flange down feet
Empty Calibration – 4mA (0%) / Distance measured from sensor flange down feet
  1. Scanner Location

Scanner location will be determined by MeasureRite using the information from this form

Fill Location (s): / xf=
xf=
xf= / yf=
yf=
yf=
Empty Location(s): / xe=
xe=
xe= / ye=
ye=
ye=
  1. Filling Process

Fill Method / Gravity Pneumatic ConveyorOther:
Dust during fill / Yes No
Max Filling Rate / Tons/hr Metric tons/ hr lbs/hr
Activity Time (all that apply) / Day Night Weekend Other
Frequency of filling / ContinuousPeriodic Day Night Other
Total time to fill in hours
Total Tons when tank is full
  1. Emptying Process

Emptying Method / Reclaimer Pneumatic Conveyor Other:
Max Emptying Rate / Tons/hr Metric tons/ hr lbs/hr
Activity Time (all that apply) / Day Night Weekend Other:
Frequency of emptying / ContinuousPeriodic Day Night Other:
Total time to empty- in hours
  1. Electrical Power requirements Signal Outputs

Power Supply Requirement / 2 Wires -for 24VDC (range 20 to 36VDC)
Standard Outputs / 4-20mA, RS485 and Ethernet (TCP/IP)
  1. Type & Quantity

Graphic Visual Mapping Required? / Yes No
Quantity to Quote / Potential Quantity Required

1100 York Road, Warminster, Pa 18974 215-674-8516

Page 1of 2 June 2013