Curriculum Vitae’
Of
Mr. Rodel Villoria Regal
#14 Lopez Jaena St., Tayug, Pangasinan, Philippines
Cellphone # + 63 908 6698004 (Phils.)or +244 925387603 (Angola)
e-mail address: ;
CAREER OBJECTIVES
To find a challenging position in Health, Safety, and Environmental Engineer or Advisor and further expand or broaden my knowledge, thus experience in this field. And be a part with one of the most prestigious and biggest company in oil & gas.
PERSONAL DATA
Address:#14Lopez Jaena St., Tayug, Pangasinan
Philippines
Age / Date of Birth:39 years old / 21 August 1970
Place of Birth:Camarinez Norte, Philippines
Nationality:Fililpino
Civil status:Married
Other Contact #:+63 9106903530
EDUCATIONAL ATTAINMENT
Degree in Bachelor of Science in Civil Engineering, Graduated at AdamsonUniversity, Manila-Philippines on October 18, 1993.
SUMMARY OF QUALIFICATION
- Over twelve year experience in the field of Health, Safety and Environment.
- Experience in regulation local and international standards and compliance issues for incident and emergency planning.
- Knowledge with various construction safety procedures; OSHA.
- Analytical, accurate, and detailed-oriented, leadership, teamworks, trainings, and integrity & ethics. Knowledge and experience offshore.
- Proficient in Microsoft word, excel, power points, etc.
- Possess a Philippine driving license and Qatari driving License.
- Knowledge in HAZID, HAZAN, HAZOP, and Qualitative Risk Assessment, CPW – Consolidated Permit to Work (QP), SIMOPS.
- Attended various trainings such as; Defensive Driving, Fire Fighting, First Aid, Rigging, Confined Space, LOTO, TSTI, Work at Heights, Excavation and Trenches, Safety Observation, Permit to Work, Heat Stress, Manual Handling, Electrical Safety, and PracticalLeadership,
TRAININGS/COURSES ATTENDED
- HELICOPTER LANDING OFFICER (HLO)
Consolidated Training System, Inc.
Cavite, Philippines
July 21 ~ 22 , 2005
- BASIC OFFSHORE SAFETY INDUCTION EMERGENCY TRAINING ( BOSIET)
IDESS
Subic bay, Olongapo – Philippines
July 17 ~ 19, 2005
- BASIC SAFETY TRAINING ( BST)
Far East Maritime Foundation Inc.
Manila, Philippines
December 03 ~ 11, 2005
- SAFETY MANAGEMENT TRAINING
(CITB) Construction Industry Training Board
Dubai, UAE
18 – 22 July 1998
5.PERMIT TO WORK
KBR
Ras Laffan Industrial City, Qatar
04 December, 2007
6.RIGGING CLASS
Mitsubishi Corporation (MHI) - Philippines
9 February 1995
7.Consolidated Permit to Work System – (CPW)
Qatar Petroleum
Ras Laffan Industrial City, Qatar
2 March 2008
WORK EXPERIENCES
1.SONAMET (Lobito Fabrication Yard)
BP/Heerema Deep Water Program
Lobito, Angola
12 June 2009 ~ Present
The Company is engage in fabricating PLET, PLEM, Driven Piles, Buoyancy Tanks and others require in Offshore installations and facility.
HSE Advisor
Responsible on on-site implementation of HSE safety policy and closely monitoring of work activities and ensure that any deviation or deficiencies noted are adhered, or measures are controlled with regards to safety. Liaise with client’s safety to further make arrangement in improving worksite. Supervise safety officer and banks-man on site to ensure smooth transition of activities on a confined space worked. Conduct necessary gas checked on all cans and buoyancy tanks, and core pipes, and prepare necessary documentation to ensure that procedures in compliance with the clients safety standards.
2.KBR ( Kelloggs Brown and Root )
QatarShellPearl Gas to Liquid Project (QSPGTL)
Ras Laffan Industrial City, Qatar
04 Oct. 2007 ~ 04 Oct. 2008
HSE Advisor
Responsible for the field level implementation of health, safety and environmental policies and guidelines. Supervised contractor safety and inspect permits, monitor and ensure that company or Shell safety procedures and guidelines are implemented by contractors. Regular inspection of site and make necessary recommendation and corrective action for the unsafe conditions and acts found at site. Prepare necessary reports and corresponding to sub-contractors for follow ups and ensure no re-occurrences. Conduct oxygen test and promote the safe conduct of work generally within the construction site. Frequent inspection at job site and monitor sub-contractors maintenance of good housekeeping, barricades, illuminations, machine guarding, etc. to ensure safe working procedures. Creates teamwork attitude with good working habitsin order to prevent accidents, injury to personnel, and damage to property. To guide, check and make necessary comments on risk assessments, method statements, JSA made by sub-contractors. Conduct HSE assessment walkthrough and participates in management site audits and walkthrough. Ensure that sub-contractors carry out clients HSE instruction and advise them on HSE issues and requirements relevant to KBR / SHELL standards and guidelines. Attend sub-contractor coordination meetings and progress meeting and discuss safety redundancies, improvements, and measure to control unsafe act and conditions.
3.MBC HUMAN RESOURCES
Lemery St., Malate, Manila - Philippines
Sept. 2006 ~ May2007
Safety Trainer
The Agency is engaged in deploying workers to America for their client and as a part of a requirement, workers should undergo safety training in the Philippines based on their policy and regulation. Yours truly was among the safety trainer whom trained these workers (Pipe fitters, Welders, Boiler Makers, etc.) about safety and the OSHA regulation as well as refinery policy in America.
4.KBR (Kellogs Brown & Root)
Exxon-mobile Development Project
Chad, Africa
Sept. 2005 ~ April 2006
The Company is engaged in the development and construction of gathering station, manifolds, pipelines and flow lines for well pads at Chad, Africa.
Sr. SafetyOfficer
Conduct Safety toolbox meeting to operatives and discuss unsafe act and condition observe at site.Facilitate the request of operatives in initiating the gas testing at well pads.Report Untoward Incident / Accident to the Safety Manager and investigate further on the events.Frequent inspection on various site location and well pads. Ensure that KBR HSE rules and procedures are implemented, and see to it that Exxon mobile safety policies are meet.
5.HEEREMA Marine Contractors
DCV BALDER 3EWK PANAMA
Gulf of Mexico, USA
24 January 2005 ~ March2005
The project was among the Sub sea pipe lay and PLET (pipe line end terminal) installation of BP America for its development on the coast of Mexico, USA.
Safety Officer
Provide professional advice in all HSE related matters. Facilitate preparation of JSA and the conducting of proper toolbox talks on board. Perform Helicopter landing Officer (HLO) activities when required. Conduct Induction trainings, presentation to all vessel crews with regards to HSE matters as necessary. Inspect life saving equipments, Fire equipments and others, and ensure that T-card system is updated. Assisting in preparation of permit to work.
6.DAEWOO E & C Co., Ltd
Western Libya Gas Project – AGIP / JGC
WAFA site, Bengazhir – Libya
Oct. 2003 – August 2004
Safety Engineer
Conduct daily safety toolbox meeting to workers of every section. Conduct gas testing for well heads, confined spaces – tanks manholes and coordinate with clients with regards to work permits. Attend weekly safety supervisory meetings and liaise with clients on possible improvement and safety measures required at site. Conduct training to safety supervisors to improved their performance. Monitor and implement safety rules and regulations and conduct daily inspection on process area and ensure that safety matters are met by our company.
7.SAMSUNG Corporation
Tabreed District Cooling Schemes ( Plant 1 & 2)
Al Dafra Air base, Abu Dhabi – UAE
2002 – 2003
Safety Engineer
Provide technical advice into project sites on matters of HSE and ensure compliance with applicable legislation, standards, and code of practice. Co-ordinate specific HSE trainings, Committees, and meetings as practicable. Ensure maintenance of records of HSE performance, Audits, Inspections, and other documents pertaining to HSE matters. Coordinate, participate, and facilitate incident/accident reporting and investigation. Report to HSE manager. Report project HSE statistics and information to project management and, where applicable to the client or its representative.
8.CADOIL – PETROFAC Project
Jebel Ali - Dubai, UAE
2001 – 2002
Safety Engineer
Investigate all industrial accidents / incidents and writes statistical reports. Develop safety-engineering standards particularly related to all hazardous areas of classification, and give technical and professional advise on procedures. Prepare Project Safety Plan and ensure that all aspect with regards to local legislation, international legislation, as well as the consultant’s standards is clearly met. Prepare job safety analysis/ risk assessments, HAZID, HAZAN.
9.SSANGYONG Construction Co.
Grand HYATT Hotel
Dubai, UAE
2000 – 2001
Site Civil Engineer
Monitor and implement construction works assigned as per drawings and specification.Supervised foreman and instruct workers on schedules of works to facilitate the smooth transition of works.Check drawings and ensure that works are done as per schedules.Liaise with consultant concerning the pre-inspection of works whilst on site.
10.DUTCO Balfour Beatty / BKGulf LLC
P.O. Box – 8944
Dubai, UAE
December 1995 – December 1999
Safety Engineer
- Inspects machinery, and equipment at planned internals to ensure safe and proper functioning, and to ensure the proper use of accident prevention devices.
- Monitor and evaluate facility and working conditions for compliance with company policies, and occupational safety and health regulations and to identify and report unsafe conditions and potential safety hazards.
- Monitor and enforce the use of required PPE and to report violations of safety policies.
- Monitor and maintain the operation condition and maintain inspection logs of fire-prevention equipment, fire suppression equipment, venting systems, emergency equipment, first-aid supplies, cranes, forklifts and other lifting devices.
- Tests working areasfor noise, toxic, and other hazards using decibel meter, gas detector and light meter
- Coordinates safety program and instructs employees in matters pertaining to safety regulations and care of equipment. Provide operator training and maintain training and qualification records of equipment operators.
- Investigates accidents involving company personnel and equipment. This includes questioning witnesses to determine cause of accident and monitor implementation of corrective actions taken to avoid recurrence.
- Prepares written report of findings and recommendations for correction of unsafe or unsanitary conditions.
- Perform analysis of accident reports, reports of near-misses and improvements to health and safety procedures.
- Trains personnel and supervisors in safety and conservation of resources
- Confers with department heads concerning such problems as accident rates and abuse of equipment, and recommends measures to improve safety records and to conserve resources.
11.EEI CORPORATION Position: Safety Engineer Libis, Quezon City – Philippines
November 1993 – December 1995
The company is mainly engaged in construction of Refinery, Power Plants, and other Electro-Mechanical Jobs and Oil related Projects to which the company had assigned me.
Projects:Construction of Air Separation Plant
Republic Glass Asahi – Philippines
September 1995 – December 1995
:80 megawatt Geothermal Plant
Philippine Geothermal Inc. – Philippines
June 1995 – September 1995
:2- 385 MWatt Pulverized Coal Fired Power Plant
Hopewell Power Station – MHI/Black &Vetch Int. Project
September 1994 – June 1995
:Construction of additional SHELL Refinery (Process)
Flour Daniel Pacific Inc. Project – Batangas, Philippines
January 1994 – September 1994
Job Description:
Responsible for the monitoring & implementation of company Safety rules and regulation.Also responsible for the frequent site inspection of all Plants, equipment, scaffolding and its installation to the assigned area to ensure those safety procedures are met.Recommend for actions by supervision and cessation of works in unsafe area and stipulate necessary compliance to permit such work.Prepare safety programs, plans, toolbox topics BI-weekly or monthly reports and prepare submittals to consultants, as well as the company.Conduct Safety Meetings to all levels of the work force and attend Safety meetings from the client or consultants.Highlights and identifies deficiencies and substandard practice to concerned department heads and recommend corrective remedial measures, follow-up implementation of it.Audits compliance with all safety and environmental procedures and protection regulations.Investigate all industrial accidents / incidents and writes statistical reports.Prepare job safety analysis
12.J. E. REBULADO BUILDERS Position: Civil Engineer Aid
Manila, Philippine April 1991 – May 1993
Project:Construction of Residential and Town Houses
Baclaran, Manila – Philippines
Job Description:
Prepare and make construction drawings, bill of materials, and estimate labor cost.Prepare schedule of activities at site and supervise manpower.Resolve problems arising at the site.Prepare a daily accomplishment by the work force.