/ GENERAL FEATURES
Length / 8 450 mm
Wheelbase / 4 185 mm
Height
(without AC) / 3 100 mm
Width / 2 390 mm
Front / rear overhang / 1 730 / 2 535 mm
Front / rear tracking / 1 812 / 1 698 mm
Interior height clearance in the corridor / 1900 mm
Access height of front door / 1 960 mm
Width of front door / 650 mm
Floor Height front / rear / 1 150 / 1 090 mm
Outer turning radius / 7 221 mm
GVW Maximum permitted laden weight / 10 250 kg
Maximum permitted weight on front axle / 3 800 kg
Maximum permitted weight on rear axle / 6 800 kg
/ 160kW (217k)
PROWAY
4 BODYWORK / EXTERIOR EQUIPMENT
Frame: Ladder frame structure made-up by mostly open metal steel profiles with catophoresis coating
Body: Made-up by FE420 steel structure with rectangle section welded profiles with anticorrosion protection .
Anti-corrosion protection made by bi-component primer.
Application of epoxy sealing under the body.
Front and rear bumper coloured piece made by fibreglass with internal steel structure.
External heated and adjustable mirrors
- Body structure in stainless steel
- Exterior paint in metallic colour
Rear emergency door equipped with tempered safety glass
Rear tail lights with reverse and fog lights
4 INTERIOR EQUIPMENT
Inside roof ceiling in aluminium coloured.
Side upper panels in aluminium coloured
Cover of the lower window frame trimmed in PVC.
Side’s panels underneath the windows in plastic laminated.
Windows vertical profile in PVC
Without sides sliding fabric curtains.
Two longitudinal hat racks on the left and right side
Emergency and ventilation manual roof hatch.
In the driver compartment the floor is made of rubber; in the passenger saloon, the floor is in marine plywood trimmed with multi colour rubber
- Corridor carpet
- Emergency and ventilation electric roof hatch.
- Loudspeakers in the roof
- Two longitudinal hat racks on the left and right side with individual air diffusion and lights (Available only with passengers air condition)
Intap Eko-lider fixed seats tissue covered
Abs armrest in corridor side
Seats with 2 point seat belt
4WINDOWS / THERMAL COMFORT
Air heated Windscreen tempered safety glass
Side windows fitted with flange, 1/3 sliding in the upper part.
Driver's compartment area heating by hot water heat exchanger.
Electrical fan with air distribution functions and air recirculation for driver compartment.
Heating for passenger compartment by means of convector, static heat exchanger, on the left and right side.
Thermo-acoustic insulation on the roof and on the floor
Emergency manual roof hatch compliance with CE Directive
2 Extractor ventilator on the roof
- Air conditioner integrate in roof
- Pre heater with electrical timer
- Special Thermo-acoustic insulation for North Europe
- Single glued fixed glass
Original driver seat Iveco
Without Driver door
Gear lever control on dashboard and controls easy to reach.
Electronic instrument cluster
Due to the new electronics available, the driver will be always informed about which gear is engaged on the cluster display.
All switches are very easy to control and to reach thanks to their disposal around the driver positioning.
Anti-glare instrument panel
Display and the electronic gauges are in the central field of driver vision
Central console is very close to driver positioning
Steering wheel with secure and ergonomic comfortable grip
Digital tachograph
Seat Built-in head restraint, with lumbar support, cloth upholstered seatbelt.
Protection behind the driver seat
Left side specific driver dashboard added
Electrical openable vertical sliding windows on driver’s side
- Driver air conditioning
- Sound indicator for reverse
Iveco TECTOR EEV
SCR technology
Diesel, 6 cylinders
Total Displacement: 5 880 cc
High Pressure Common Rail 1600 bar Injection
Intake: TCA – Waste Gate
Water cooling
Bore and stroke (mm) 102 x 120
Weight, dry: 470 kg
Total oil capacity: 11,6 l.
Maximum Power: 160 kW (217HP) at 2.700 rpm
Maximum Torque: 680 Nm/69kgm at 1.200 - 2.100 rpm
4 GEARBOX
ZF 6S700
1st / 6.02:1 / 4th / 1.40:1
2nd / 3.32:1 / 5th / 1.00:1
3rd / 2.07:1 / 6th / 0.79:1
Reverse / 5.58:1
4 DRIVE / REAR AXLE
Banjo type rear axle
Iveco type 450721
Ratio:1:3,07
4FRONT AXLE / STEERING
Rigid structure or “I” shaped section Iveco 5833
Oil lubrication
Left and right-hand side driver’s position
Recirculating ball power steering, type ZF 8090
Steering Wheel diameter 500 mm, adjustable for height and rake
4 SUSPENSION
Front suspensions: Pneumatic - Telescopic shock absorbers - Stabilizer bar
Rear suspensions: Pneumatic - Telescopic shock absorbers - Anti-roll bar
4 BRAKES
Disc brakes self-ventilated.
Wheels anti-locking system ABS is standard: the ABS also controls the EBL (Electronic Brake Force Limitation)
APU (Air Processing Unit) - a compact and concentrated unit for providing and processing compressed air for the braking system and auxiliary devices.
The APU unit contains the heated air dryer, the four-circuit safety valve, the pressure limiting valves and the air socket.
Service and emergency: Pneumatic with two independent circuits
Parking brake: Mechanical pneumatically operated (acting on the rear wheels)
Engine brake: on the exhaust controlled by a butterfly valve
Compressor: 360 cc
- Electromagnetic Retarder
The electronic architecture is based on Iveco Multiplex system, system for permanent control and connection of all electric/electronic components and ECU’s of the vehicle.
All ECU’s, switches and interfaces are connected by single CAN-bus-systems.
Voltage: 24v
Batteries: 143 Ah
Alternator : qty 2 of 90 A
Starter motor: 4.0 kW
Mechanical batteries disconnector
Central emergency switch
4 FUEL TANK
Fuel tank 115 liters in plastic material
AdBlue tank: 25 l.
RADIO / VIDEO
- Radio CD Player
- Radio - CD Player & Microphone and Amplifier set.
- Digital Watch
Tyres 235/75 R 17.56
Single front and twin rear.
Two wheel chocks.
Rain mud flap on front and rear wheels.
- Cover Wheels
- Main option
IVECO – 1, rue des Combats du 24 août 1944 – 69200 Venissieux - www.irisbus.com - © IRISBUS
IVECO reserves the right to modify specifications at anytime without prior notice