Jacek Kozlowski P.Eng., MSc
résumé, page 2
32 Larstone Ave.,
Toronto, ON M8Z 2N8 / Work:
(905) – 677 4341 ext.2808
Home:
(416) - 234 0553
Résumé
12/1984 - present / Boeing Toronto Ltd. / Toronto, Ontario, CanadaMaintenance Department: Electronics/Electrician Engineer – Technical Advisor
I am employed with Toronto subsidiary of Boeing Company aerospace division (former McDonnell Douglas) as an electronics/electrician engineer and technical specialist since 1984.
The subsidiary’s production included complete airplane wings, fuselages, leading edges, frames and machined parts for DC10, MD11, MD90 and Boeing717 airplanes.
Employed in maintenance department for the whole period, my responsibility was to provide technical expertise to various departments of the plant with the main focus to production department coordinating and overseeing work of different skilled trades especially electronics/electricians and machine repairmen.
As a technical advisor I actively participated in the plant modernization:
- planning, refitting and refurnishing the old equipment and machinery
- planning, purchasing and installing new production lines, cooperating with machine builders, preparing cost estimates and time leads, receiving, testing and calibrating new machinery.
My key contribution recognized and highly prized by the company was to keep production lines busy with the minimum downtime caused by the machinery breakdowns. I succeeded in reducing the number of failures by suggesting, developing and implementing improvement plans, which later were recommended and copied across the organization.
My other responsibilities included preparing, scheduling and organizing preventive maintenance, preparing and writing technical guides, documentation and operational manuals; instructing the machine operators and maintenance staff.
As an electronics/electrician engineer my duties included providing the leading hand in problem solving and the troubleshooting of the production machinery such as:
· manual and automatic drilling and riveting machines (Gemcor Drivematics),
· Cincinnati Milacron ‘Gantry’ stringer milling machines
· milling and routing small NC machines such as Mitsubishi, OKK, Mazak, Bridgeport, Cincinnati 5-axis
· automatic tool grinding machines by Huffman Corp.
· precision presetting machine ‘Microbore’ (Tooling System Division)
I have broad experience working with the various NC, DNC and PLC controllers including Allen-Bradley, Square D, Fanuc, Phillips Siemens, Vickers and others including electric motors variable speed controllers.
I am certified specialist for Allen Bradley’s AT 8000 controllers.
In 1990’s I developed the new method to monitor, troubleshoot and repair riveting machines (Gemcor Drivematics) used by McDonnell Douglas to make wings for MD80, MD90 and MD11 airplanes.
Previous
experience / 1982 - 1984 / Research & Development Electronics Engineer / Federal Pioneer Ltd.,
Toronto, ON Canada
1977 - 1981 / Research & Development Electronics Engineer / Zaklady Radiowe,
Warsaw, Poland
EDUCATION / 10/1975 – 07/1977 / Warsaw University,
Warsaw/Poland / Postgraduate studies
10/1970 - 09/1975 / Gdansk Technical Polytechnic / Graduated in Electronics Apparatus & Microwaves
09/1964 - 06/1969 / Gdansk Technical College / Graduated in Electronics
RTV division
Diploma / Master of Science in Electronics
Associated Degree / Electronics Engineer
Skills / Strong knowledge of the computers: programming, hardware, software and networking
Hobbies / Programming telecommunication software, satellite equipment
Recent courses / University of Toronto Continuing Studies: software programming, networking and network administration
Misc. / Married, with 2 children and a dog. Sports activity: skiing, swimming, tennis
Association / Professional Engineer, member of APEO since 1984
References / Available upon request
2