L-Band Operator Training Workbook

L-band Operator Training Operator Training Workbook

L-band Operator Training Workbook

The copy of this worksheet will be used to document the training of each operator.

Each operator’s worksheet is an auditable document, and must be filed in the Operator Training Log binder in the NLCTA control room.

Notes:

·  As requirements change, an operator may need to use several versions of the worksheet. All copies shall be retained in the Operator Training Binder.

·  Qualification requirements may change with time, requiring that the area be re-appraised. The “Authorization Rescinded” box in the following worksheets will be used to remove the operator’s endorsement in the applicable areas if needed.

·  If the operator looses his or her competency or familiarity with L-band Operations (because of a change of employment, for example), the “Authorization Rescinded” box in the following worksheets will be used to remove the operator’s endorsement.

·  If a qualification is dropped as a necessary competency to serve as an operator, the Safety Officer or ADSO may indicate such in the “Not Required” box.

3: Approval of the operator safety training requirements

L-band Operations Manager Date

ILC Safety Officer Date

Accelerator Department Safety Officer Date

Operator Name______

Classroom training: Sign and date each endorsement as applicable.

Training / Date Accomplished
103 – Hazard Communications
105 – Hazardous Waste
108 – Fire Extinguisher Training
– NLCTA Area-specific Fire Training[1]
116 – RWT I – Radiation Worker Level I
116PRA – class 116 practical
157 – Lockout Tagout (LOTO)
239 – Electrical Safety (non-electrical)
251 – Electrical Safety – Electrical workers
270 – Operation of Radiation Generating Devices
270PRA – class 270 practical
– Individualized tour of the End Station Facilities

Training or demonstrated competencies required of each NLCTA operator. Completion of this section allows operator to run NLCTA in “Unattended Operation – RF Only” mode (no beam). This section must be fully endorsed before operator is assigned a keybank key or is permitted to operate the NLCTA PPS.

Area / Operations
Manager / Safety Officer / No Longer Required / Authorization Rescinded
Familiar with NLCTA Operations Directives relating to work authorization and responsibilities of NLCTA Operators
Judged able to accept the responsibilities described above

Operator: I acknowledge the above listed training:

(Signature/Date): ______

Supervisor: I acknowledge the above listed training, and am granting my approval for the above-named individual to operator the L-band klystrons:

(Signature/Date): ______

November 27, 2006 SLAC-I-ILC-001-03-04-02-R00 Page XXX

[1] NLCTA Area-Specific Fire Training is offered by the NLCTA Safety Officer and the SLAC Fire Marshal. No ESH class number exists for this training.