11th International DAAAM Baltic Conference (12 pt)
"INDUSTRIAL ENGINEERING - (12 pt)
20-22 April 2016, Tallinn, Estonia (12 pt)
¶ (12 pt)
INSTRUCTIONS FOR AUTHORS AND A SAMPLE PAPER
(14 PT BOLD WITH CAPITAL LETTERS, TWO LINES MAX.)
¶ (14 PT)
Katalinic, B.; Kusiak, A. & Ueda, K. (12 pt bold)
¶(12 pt)
¶(12 pt)
¶ Abstract: Abstract of 50-120 words (12 pt, italic) yy yyy yy yyy yyyy yyyy yy yyyy yyyyy yyyy yyy yy yy yyy yyyy yyyyy yyyy yyyyy yyyy yyy yy yy yyy yyyy yyyyy yyyy yyyyy yyyy yyy yy yy yyy yyyy yyyyy yyyy yyy yy
Key words: List 4-5 keywords. (12 pt, italic).
(12pt)
1. INTRODUCTION (12 PT, CAPITALS, BOLD)
(12pt)
(12 pt, normal) The paper must be written in English. It shall contain and be structured in the following way: problem statements, application area, research course, method used, status, results, further research, references.
(12 pt)
2. INFORMATION
(12pt)
2.1 Layout (12 pt, bold)
• Use DIN A4 Format (297 x 212 mm).
• Margins: left 30 mm; top, bottom, and right 25 mm each.
• 2 columns, column distance 7 mm.
• Both columns on first and second page must be finished exact at the bottom of the page.
• The text should be written on one side of the page only.
• The paper has to be written in MS WORD (doc or docx) format.
• Use Times New Roman fonts, line spacing single. The font formats are: paper title: 12 pt bold, capital letters; author's name(s): 12 pt bold; key words: 12 pt, italic; chapter titles: 12 pt bold, capital letters; subtitles: 12 pt bold, numbered, left justified, upper and lower case; text: 12 pt
• The paper is restricted to six (6) A4 pages. Use the whole space!
Avoid leaving a heading at the bottom of a column, with the subsequent text starting at the top of the next page/column. Use extra spacing (between earlier figures or sections) to push the headings up to the top of the same column as its text.
Paragraphs should be justified, using single spacing.
(12 pt)
2.2 Language, Stile Spelling
• Use common technical terms.
• Spelling: Follow Merriam Webster´s Collegiate Dictionary, Longman or Oxford Dictionaries.
• All articles will be peer-reviewed also in terms of correct English.
(12 pt)
2.3 Visual Aids at Conference
Visual Aids: video projector (SVGA-format) for PowerPoint slideshow.
(12 pt)
3. FIGURES
(12 pt)
xx
xx
x
x Figures
Fig. 1. Title of figure xxx xx x xx xxx xxxx xxxxx xxxx xxx xx xx xxxxx xxxx xxxx
(12 pt)
Figures have to be made in high quality, which is suitable for reproduction and print. Don't include photos or colour prints. Place figure at the top or bottom of a column wherever possible, as close as possible to the first reference to them in the paper. The size of symbols and lettering should not be smaller than 1.5 mm.
(12 pt)
4. TABLES
(12 pt)
Place table at the top or bottom of a column wherever possible, as close as possible to the first reference to them in the paper.
(12 pt)
Table 1. Title of table, left justified, subsequent text indented. xxx xx xxxxx xxxx xxx
(12 pt)
5. EQUATIONS
(12 pt)
Equations are centred and numbered consecutively, from 1 upwards.
(1)
(12 pt)
6. KEY DATES AND MY CHECKLIST
(12 pt)
Camera-ready paper due (electronic submission) / 01.04.2016
Registration fee payment / 01.04.2016
Preliminary Program / 18.04.2016
DAAAM 2016 BALTIC CONFERENCE / 22-24.04.2016
(12 pt)
After electronic submission the articles are peer-reviewed. The authors will be contacted in terms of necessary improvements if needed. It is recommended to check language and quality of figures carefully before submission.
(12 pt)
7. CORRESPONDING ADDRESS
(12 pt)
MSc. Aigar Hermaste
TUT, Department of Machinery
Ehitajate tee 5, 19086 Tallinn, Estonia
Phone: 372+620 3269,
Fax: 372+620 3250,
E-mail:
http://innomet.ttu.ee/daaam
(12 pt)
8. INDEXING OF DAAAM PAPERS
(12 pt)
Conference papers will be published in Proceedings of the 11th International Conference of DAAAM Baltic, INDUSTRIAL ENGINEERING, Editor T.Otto, 20-22 April 2016, Tallinn, Estonia, referred/indexed by Scopus. Extended papers will be asked to the authors after the conference in order to be published in peer-reviewed special issue of Proceedings of the Estonian Academy of Sciences, 2016, abstracted /indexed in: Science Citation Index ExpandedTM. (Web of Science), Journal Citation Reports/Science Edition, Cambridge Scientific Abstracts, Chemical Abstracts, INSPEC database, Mathematical Reviews, Zentralblatt MATH, Scopus® database, Academic Search Premier (EBSCO publishing database), Gale's Academic OneFile database, ProQuest LLC, Airiti Incorporation. Online access (full texts): www.kirj.ee and www.ebscohost.com.
(12 pt)
9. ADDITIONAL DATA ABOUT AUTHORS
(12 pt)
Please add data about yourself (name, address, contact data) as the last chapter of the paper. Please send us also on separate file the additional data about all authors of manuscript.
Additional data are
1) Author(s) Name(s) Title(s) and Position(s)
2) Title of Manuscript
3) Full Address of all authors: (Position / Title / Postal Address / E-mail Address / Home Page / Phone / Fax)
4) Corresponding Author: (Name, Address)
(12 pt)
12. CONCLUSION
(12 pt)
Please read this instruction carefully. Prepare your paper exactly according to the instructions. We are looking forward to meet you in Tallinn in April 2016.
(12 pt)
11. REFERENCES
(12 pt)
Number references to published works consecutively and insert a superscript numeral in the appropriate place in the text in brackets (e.g. [1]). A list of references in numerical order should appear at the end of the paper, and all references in this list should appear in the text and vice versa. References should be presented as follows:
(a) For a book: Name(s) and initials of the author(s), title of the book, publisher, town and year of publishing:
Lusztig, G. Introduction to Quantum Groups. Birkhauser, Boston, 1993.
(b) For articles in journals: Name(s) and initials of the author(s), title of the paper, abbreviated journal title, year, volume (in bold), page numbers:
Milnor, J. On the Betti numbers of real algebraic varieties. Proc. Am. Math. Soc., 1964, 15, 275-281.
(c) For articles in collections: Name(s) and initials of the author(s), title of the paper, title of the collection (preceded by In), name(s) and initials of the editor(s), volume number, publisher, town, and year of publishing, page numbers:
Jones, W. B. Multiple-point Pade tables. In Pade and Rational Approximation: Theory and Applications (Saff, E. B. and Varga, R. S., eds.). Academic Press, New York, 1977, 57-65.
Muller, P. New examples of exceptional polynomials. In Finite Fields: Theory, Applications and Algorithms (Mullen, G. L. and Shiue, P. J., eds.). Contemp. Math. Amer. Math. Soc., 1994, 168, 245-249.
(d) Electronic materials should be treated as if they were printed texts. Add specification of the electronic medium, e.g., CD-ROM, Diskette, etc. If material is available online, give the access mode and address, but also date of the last access, e.g.
Russian Transliterate Tool [WWW] http://www.russianlessons.net/dictionary/transliterate.php (12.01.2012)
(e) Papers in Cyrillic: Give the official title in English, German, or French if available (e.g. from summaries). If no official English, German, or French version is available, translate the titles of books and articles into English; abbreviate and transliterate journal names into Roman script; transliterate the publication data; add: (in Russian). For Russian transliterate you could use Russian Transliterate Tool http://www.russianlessons.net/dictionary/transliterate.php .
(12 pt)
12. ABOUT YOUR JOURNEY
(12 pt)
The city of Tallinn has the airport (www.tallinn-airport.ee/) situated almost next to city Centre. You can get more information about Tallinn and its events from Estonian http://www.visitestonia.com and Tallinn tourist information (http://www.tourism.tallinn.ee/). This year the conference will be held in Tallink City Hotel (http://www.tallinkhotels.com/en/tallink-city-hotel ). During the conference is organised a visit to Tallinn University of Technology (www.ttu.ee) at Mustamäe, Ehitajate tee 5, located about 6 km from the Centre (Kesklinn). The official money is Euro. VISA and MasterCard card is very common and accepted everywhere.
The weather at the middle of April is expected to be between zero and 25 °C. Besides sunshine you should be ready for slight rain. It might become cold at night, so take warm clothes with. However, this time of spring is one of the most beautiful times in Estonia. It is recommended to book hotels during the March already. There is online-registration possible in every hotel in Tallinn.