Toshiba IK-WD14A 1080p HDDay/Night Mini Dome Network Camera
Toshiba America Information SystemsApril, 2012
9740 Irvine Blvd.
Irvine, CA 92618
877-855-1349
Product Guide Specification
Section 28 23 29
Video Surveillance Remote Devices and Sensors
Part 1– GENERAL
1.1SUMMARY
A.Section Includes
1.Video Surveillance Remote Devices
B.Related Sections
1.Section 28 23 13 – Video Surveillance Control and Management Systems.
2.Section 28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces.
3.Section 28 23 19 – Digital Video Recorders and Analog Recording Devices.
4.Section 28 23 29 – Video Surveillance Remote Devices and Sensors.
1.2REFERENCES
A.Federal Communication Commission (FCC) (
1.FCC CFR 47 part 15 Class A – Telecommunications – Radio Frequency Devices – Digital Emission
2.FCC CFR 47 part 15 Class B – Telecommunications – Radio Frequency Devices – Digital Emission
B.International Electrotechnical Commission (IEC)
1.IEC 60529 Degrees of Protection provided by enclosures (IP code)
C.Underwriters Laboratories, Inc. (UL) (
1.UL 2044 Commercial Closed-Circuit Television Equipment
D.Institute of Electrical and Electronics Engineers, Inc. (IEEE) (
1.IEEE 802.3af Power Over Ethernet
E.Industry Canada (ICES) (
1.ICES-003 Digital Apparatus – Spectrum Management and Telecommunications Policy Interference Causing Equipment Standard
F.Canadian Standards Association (CSA) (
1.CSA C22.2 NO. 60950-1 Information Technology Equipment – Safety – Part 1: General Requirements
1.3SYSTEM DESCRIPTION
A.Video Surveillance Remote Devices
1.1080p HD Day/Night Mini Dome Network Camera
B.Performance Requirements
1.Provide high definition images – day or night.
2.Possess advanced features.
3.The camera shall be of the manufacturer’s official product line, designed for commercial/industrial continuous 24/7 use.
4.The camera shall be based upon standard components and proven technology.
1.4SUBMITTALS
A.Submit under provisions of Section [01 33 00].
B.Product Data:
1.Manufacturer’s data, user and installation manuals for allequipment and software programs including computer equipmentand other equipment required for a complete video system.
C.Shop Drawings
1.System device locations on architectural floor plans.
2.Full Schematic of system including wiring information for all devices.
D.Closeout Submittals
1.User manuals.
2.Parts list.
3.System device locations on architectural floor plans.
4.Wiring and connection diagrams.
5.Maintenance requirements.
1.5QUALITY ASSURANCE
A.Manufacturer:
1.Minimum of 10 years experience in the manufacture and design of Video Surveillance Devices.
B.Installer:
1.Minimum of 5 years experience installing Video Surveillance Devices.
2.All installation, configuration, setup, program and related work shall be performed by electronic technicians thoroughly trained by the manufacturer in the installation and service of the equipment provided.
C.System Requirements:
1.Listed by UL specifically for the required loads.
2.Listed by IC specifically for the required loads.
3.Listed by FCC specifically for the required loads.
4.Listed by CSA specifically for the required loads.
5.Listed by RoHS specifically for the electronic assembly.
1.6DELIVERY, STORAGE AND HANDLING
A.Comply with requirements of Section [01 60 00]
B.Deliver materials in manufacturer’s original, unopened, undamagedcontainers; and unharmed original identification labels.
C.Protect stored materials from environmental and temperature conditions following the manufacturer’s instructions.
D.Handle and operate products and systems according to manufacturer’s instructions.
1.7PROJECT CONDITIONS
A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
1.8MAINTENANCE
A.Maker ordering of new equipment for expansions, replacements and spare parts available.
B.Provide factory direct technical support to the installing firm.
1.9WARRANTY
A.Provide manufacturer’s warranty covering two (2) years for replacement and repair of defective equipment.
Part 2– PRODUCTS
2.1MANUFACTURER
A.Acceptable Manufacturer
Toshiba America Information Systems
9740 Irvine Blvd.
Irvine, CA 92618
877-855-1349
B.Substitutions: Under the provisions of Division 1:
1.All proposed substitutions must be approved by the Consultant or Architect/Engineer professional.
2.Proposed substitutions must provide a line-by-line compliance document.
2.21080p HD Day/Night Mini Dome Network Camera
A.General Characteristics:
1.Provide advanced image support of resolutions up to 2 Megapixels of effective picture elements 1920 (H) x 1080 (V)
2.Tri codec for simultaneous H.264, MPEG4 and JPEG transmission.
3.Simultaneous quad streaming of live video transmission.
4.Provide H.264 compressed video at 30 frames per second.
5.Provide MPEG4 compressed video at 30 frames per second.
6.Provide JPEG compressed video at 30 frames per second.
7.Mini dome housing capable of being mounted Use a high quality 1/2.7” CMOS progressive scan sensor.
8.Provide B/W pictures down to 0 lux with IR LEDs on.
9.Provide for audio input and output directly to and from the camera.
10.Be capable of accepting power from 12V DC, 24V AC or IEEE 802.3af Power-over-Ethernet (PoE).
11.Be capable of storing images on-camera via SD/SDHC storage.
B.Camera shall be capable of the following adjustments and features:
1.The camera shall be of a compact mini dome form factor with the following mechanical features.
a.3-axis board type lens mount
b.Built-in SRLED IR illuminators with a range of up to 20 meters.
2.The camera shall have a vari-focal 3 – 9mm, F1.2 – 2.1 lens.
3.Removable IR cut filter mechanism.
4.Horizontal angle of view of 32 degrees – 93 degrees.
5.Vertical angle of view of 24 degrees – 68 degrees.
6.Remote zoom
7.Remote focus
8.1 audio microphone input
9.1 audio output.
10.1 digital alarm input.
11.1 digital alarm output.
C.Video adjustments and requirements
1.Imager: Progressive scan 1/2.7 Inch CMOS.
2.1920 (H) x 1080 (V) effective picture elements.
3.Primary color system.
4.Tri codec H.264, MPEG4 and JPEG compression.
5.Minimum illumination of 0 lux with IR LEDs on.
6.Electronic shutter of 1/5 – 1/40,000 seconds.
7.Auto white balance.
8.Automatic Gain Control.
9.Backlight compensation.
10.Flickerless imaging, 50Hz or 60Hz selectable.
11.Privacy masking capabilities.
12.Tamper detection capabilities.
13.Motion detection capabilities.
D.Web Server adjustments and requirements
1.Protocols supported include TCP/IP, HTTP, HTTPs, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS,PPPoE, CoS, QoS, SNMP and 802.1X
2.ONVIF 1.02 compatible
3.Internet protocols supported include IPv4 and IPv6.
4.Installation Wizard setup program.
5.Simultaneous quad video streaming.
6.Support for up to 10 simultaneous live view clients.
7.Bandwidth control services include QoS and CoS.
8.Image size in H.264 mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x 480, 320 x 240.
9.Image size in MPEG4 mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x 480, 320 x 240.
10.Image size in JPEG mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x 480, 320 x 240.
11.Maximum frame rate in motion H.264 mode: 30 fps at all resolutions
12.Maximum frame rate in motion MPEG4 mode: 30 fps at all resolutions
13.Maximum frame rate in motion JPEG mode: 30 fps at all resolutions
14.Maximum FTPc frame rate: 30 fps.
15.Basic user authentication.
16.Multi-level ID and password login.
17.IP address filtering.
18.HTTPS.
19.802.1x port based authentication.
20.Support for DDNS services includes no-ip.com and changeIP.com.
21.Multi-cast and Uni-cast services.
22.Alarm based recording to:
a.Email
b.FTP
c.SD card
23.Client PC based recording
24.SD and SDHC card based recording.
25.Electronic Pan/Tilt/Zoom.
26.Configuration settings import and export function.
27.Browser based firmware updating.
28.Automatic daylight savings time updating.
29.Embedded operating system Linux
E.Interfaces
1.10 Base-T/100 Base-TX.
2.RJ45 connector.
F.Operating Environment
1.Internet Explorer 8.0 or later.
2.Windows XP, Vista and Win7 operating systems.
G.Safety and Radio compliances
1.FCC/A for camera.
2.IC (ICES-003) for camera.
3.UL60950-1 for AC adapter.
4.CSA C22.2 No. 60950-1 for AC adapter.
5.FCC/B for AC adapter.
6.RoHS compliance per Toshiba guideline
H.Mechanical
1.Weight: 1.83 lbs (0.83 kg)
2.Dimensions: 6.3 inches x 4.3 inches (diameter) (160mm x 109mm)
I.Electrical
1.Camera input voltage/power requirements: DC 12V+/-10%, AC 24V+/-10%, IEEE 802.3af PoE.
2.Power consumption: 12V DC/0.5A, 24V AC/0.5A
J.Environmental
1.Operating Temperature: 32°F to 122°F (-10°C to 50°C)
2.Operating Humidity: 20 to 90% relative humidity.
Part 3– EXECUTION
3.1EXAMINATION
A.Examine areas to receive devices and notify adverse conditions affectinginstallation or subsequent operation.
B.Do not begin installation until unacceptable conditions are corrected.
3.2PREPARATION
A.Protect devices from damage during construction.
3.3INSTALLATION
A.Install devices in accordance with manufacturer’s instruction at locationsindicated on the floor drawings plans.
B.Perform installation with qualified service personnel.
C.Install devices in accordance with the National Electrical Code or applicablelocal codes.
D.Ensure selected location is secure and offers protection from accidentaldamage.
E.Location must provide reasonable temperature and humidity conditions,free from sources of electrical and electromagnetic interference.
3.4FIELD QUALITY CONTROL
A.Test snugness of mounting screws of all installed equipment.
B.Test proper operation of all video system devices.
C.Determine and report all problems to the manufacturer’s customer servicedepartment.
3.5ADJUSTING
A.Make proper adjustment to video system devices for correct operation inaccordance with manufacturer’s instructions.
B.Make any adjustment of camera settings to comply with specific customer’sneed.
3.6DEMONSTRATION
A.Demonstrate at final inspection that video management system used withdevices functions properly.
END OF SECTION
Project Name/Project Number28 23 29 – 17Video Surveillance Remote
Devices and Sensors