Press release
eyevis Slim-Cubes: super-slim, wallmountable and easy to service
eyevis presents the slimmest rear projection cubes worldwide for the first time at ISE 2015
The lowest depth worldwide, wallmountable, faster to install and easier to service: These are the features of the new Slim-rear projection-cubes by eyevis for the professional usage in control rooms and TV studios. With the lowest depth of only 422 mm, the new Slim-Cubes are incredible space-saving. As the only rear-projection system worldwide the Slim-Cubes moreover can also be mounted directly on a wall without a substructure. There is no need for space behind the Cubes for ventilation, service-access or support structure.
The easy-handling concept with front-support enables at the same time a quick and easy setup and increases the operational reliability thanks to reduced downtimes during maintenance. For the first time eyevis presents the new Slim-Cubes at ISE, from 10 to 12 February in Amsterdam, stand 2C66.
Incredible space-saving thanks to lowest depth worldwide and front support
Through the low depth of only 422 mm (with 50“screen diagonal and Full HD resolution) and the possibility to be mounted directly at a wall the eyevis Slim-Cubes are slim enough to can be installed even in the smallest control rooms and TV studios. In the elaborate housing all cable and air ducts are integrated. Thus, in combination with the front support there is no need for service access or ventilation space behind the cubes.
Easy-handling-concept speeds installation, simplifies service and saves money
The easy-handling-concept speeds the setup and reduces the downtime during maintenance. Due to the single-module-design of the projection unit and the front access of the cubes it is possible to for example build a video wall without having a projection unit in the cube encasing during setup. After the installation the projector units can be easily inserted into the casing and connected from the front- or the backside and be adjusted with a software. Damaged or serviceable projector units are simply removed from the cubes and replaced by an exchange-unit. The cube is immediately ready for use and the removed projector unit is serviced in the workshop. This reduces downtime to an absolute minimum.
All advantages of the eyevis Slim Cubes at a glance
- Incredible space saving for the installation in areas that were, due to space requirements, not suitable for rear projection cubes before.
- Lowest overall depth of only 422 mm with 50“screen diagonal and Full HD resolution
- Wallmountable
- Through front support and integrated air ducts there is no need for service access or ventilation space behind the cubes.
- Projection units in innovative single-module design: all electric, optical and electronic components as well as the cooling system are integrated completely into the unit.
- Easy and fast to install: The projection units can be inserted after the installation of the casings.
- Lowest downtimes during maintenance: The projection units as a whole can be easily replaced by an exchange-unit. The cube is immediately ready for use.
- Smallest bezels between adjacent displays thanks to the discrete screen clamp technology from eyevis
- Robust and self-supporting case: The cubes can be easily placed on top of each other without an additional supporting structure.
Technical Specifications
EC-50-LHD-ISE-SLIM
· Screen diagonal: 50” (ca. 127 cm)
· Cube measurements: 1107 mm x 1060 mm x 422 mm (B x H x T)
· Display resolution: Full HD, 1.920 x 1.080 (16:9)
· Brightness: 370 cd/m²
About eyevis
eyevis is one of the leading manufacturers of large scale video systems for professional applications in control rooms, virtual reality and simulation as well as in the areas of broadcast, AV and Digital Signage. eyevis has a worldwide network of subsidiaries and certified retailers. As one of the few providers, eyevis is capable of offering entire systems from one source. The product portfolio of eyevis includes display solutions, graphic controllers, IPTV and AV streaming systems as well as software applications.
eyevis Press contact:
For press releases and additional information please contact:
Martin Wagner
PR Manager eyevis
Tel.: +49 (0) 7121 4 33 03-135
Fax: +49 (0) 7121 4 33 03-22
www.eyevis.de