Demonstrating Green Unikleen
EQUIPMENT AND SUPPLIES NEEDED
To properly demonstrate Green Unikleen, you must bring the following equipment to the customer’s location:
- Green Unikleen concentrate
- Spray Bottle
- Small Scrub Brush
- Clean Cloths
- Buckets
- Sponge
The customer you are demonstrating for should also have:
- Mop
- Push broom or stiff floor brush
- Floor scrubber (if available)
- Hot water source
If you will be demonstrating in an office and not at a manufacturing facility, you should also bring:
- Bag of dirty automotive or machine parts
- Floor tile – vinyl, with grease or dirt
- Painted surface
- Carpet Sample with grease or food stain.
DEMONSTRATING DIFFERENT CLEANING TASKS
Parts Washing
- In a bucket, mix Green Unikleen with hot water
- For very greasy parts, mix 1 part Green Unikleen with 4 parts hot water
- For cleaning parts soiled with oil and lubricants, mix 1 part Green Unikleen with 8 parts hot water
- For lighter parts cleaning (parts with oil deposits, etc.), mix 1 part Green Unikleen with 12 parts hot water.
- Immerse parts in the mixed solution, brush with a scrub brush, and rinse off.
Floor Cleaning and Degreasing
- If a floor scrubbing machine is available, mix Green Unikleen with hot water. Dilute the Green Unikleen with water according to the type of dirt being cleaned from the floor:
- For oil spillage on floor, dilute 1 part Green Unikleen with 4 parts water.
- For degreasing floor, dilute 1 part Green Unikleen with 8 parts water.
- For general floor scrubbing, dilute 1 part Green Unikleen with 32 parts to 64 parts water.
- If a floors scrubbing machine is not available, use mop and broom or deck brush if needed.
- For light cleaning, mop with solution of 1 part Green Unikleen to 64 parts water.
- Allow solution to work on floor for a few minutes
- Rinse floor and allow to dry.
- For greasy floors, use a solution of 1 part Green Unikleen to 8 parts water. Pour solution on floor and agitate with deck brush or broom. Rinse floor and allow to dry.
- If demonstrating on a floor tile sample you have brought, use spray bottle with solution, spray on floor tile, brush with scrub brush if necessary, and wipe clean with a cloth.
General Purpose Cleaning
For demonstrating Green Unikleen for General Purpose cleaning, use a spray bottle, brush, and cloth.
- In the spray bottle, mix 1 part Green Unikleen with 16 parts water.
- Spray mixture onto surface being cleaned. Allow a few seconds for solution to work. For badly soiled or greasy surfaces, apply product and scrub with scrub brush. Wipe with clean cloth to remove dirt and solution.
Carpet Cleaning
- In a spray bottle, mix 1 part Green Unikleen with 32 parts water.
- Spray mixture onto soiled area of carpet.
- Work into carpet with scrub brush.
- Soak up solution and dirt by absorbing into cloth.
Bathrooms
- In the spray bottle, mix 1 part Green Unikleen with 32 parts water.
- Spray onto bathroom surfaces - - toilet, sink, shower, etc.
- Wipe surface clean with clean cloth.
IPAX Cleanogel, Inc. – 8301 Lyndon – Detroit, MI 48238 USA - (313) 933-4211