SECTION 105113

METAL PISTOL LOCKERS

This guide specification section has been prepared by Tiffin Metal Products for use in the preparation of a project specification section covering metal pistol lockers. Additional guide specifications offered by Tiffin Metal Products include:

Section 10 5113.01 - Metal Vented Wardrobe Lockers

Section 10 5113.02 - Metal Personnel Lockers

Section 10 5113.03 - Metal Visitor Lockers

Section 10 5113.05 - Metal Sidearm Lockers

Section 10 5113.06 - Metal Duty Bag Lockers

Section 10 5113.07 - Metal Evidence Lockers

Section 10 5113.08 - Metal Mini Lockers

Section 10 5113.09 - Refrigerated Metal Security Lockers

The following should be noted in using this specification:

Hypertext links to specific websites are included after manufacturer names and names of organizations whose standards are referenced within the text, to assist in product selection and further research. Hypertext links are contained in parenthesis and shown in blue, e.g.:

(

Optional text requiring a selection by the user is enclosed within brackets, e.g.: "Section [090000.] [_____.]"

Items requiring user input are enclosed within brackets, e.g.: "Section [_____ - ______]."

Optional paragraphs are separated by an "OR" statement, e.g.:

**** OR ****

Sustainable requirements are included for projects requiring LEED certification, and are included as green text. For additional information on LEED, visit the U.S. Green Building Council website at

For assistance on the use of the products in this section, contact Tiffin Metal Products by calling 800-537-0983, by email at , or visit their website at

PART 1GENERAL

1.1SUMMARY

Edit the following paragraphs to include only those items specified in this section.

  1. Section Includes:
  2. Metal pistol locker units with hinged doors.

Coordinate the following paragraphs with other sections in the project manual.

  1. Related Sections:
  2. Division 01: Administrative, procedural, and temporary work requirements.

1.2REFERENCES

In the following paragraphs, retain only those reference standards that are used elsewhere in this section.

  1. ASTM International (ASTM) ( A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy Coated (Galvannealed) by the Hot-Dip Process.

1.3SYSTEM DESCRIPTION

Edit the following paragraphs to suit project requirements. Model 0190 is 14-1/4 x 14 x 14-1/2 inches; Model 0190V-TLC is 14-1/4 x 6 x 28-1/2 inches.

  1. Metal Lockers:
  2. Configuration: Four doors.
  3. Mounting: [Countertop.] [Surface.]
  4. Size: [14-1/4 inches wide x 14 inches deep x 14-1/2 inches high.] [14-1/4 inches wide x 6 inches deep x 28-1/2 inches high.]

1.4SUBMITTALS

Limiting submittals to only those actually required helps to minimize liability arising from the review of submittals. Minimize submittals on smaller, less complex projects.

Include the following for submission of shop drawings, product data, and samples for the Architect's review.

  1. Submittals for Review:
  2. Shop Drawings: Include dimensioned plans and elevations showing locker layout and relationship to adjacent construction.
  3. Product Data: Manufacturer's descriptive data.
  4. Samples: 3-1/4 x 1-1/2 inch paint samples [showing available colors.] [in each color.]

Include the following for submission of sustainable design submittals.

  1. Sustainable Design Submittals:
  2. Recycled Content.
  3. Regional Materials.

1.5QUALITY ASSURANCE

The following two paragraphs specify a minimum level of experience required of the parties performing the work of this section. Retain if required, and edit to suit project requirements.

  1. Manufacturer Qualifications: Minimum [10] [__] years [documented] experience in work of this Section.
  1. Installer Qualifications: Minimum [2] [__] years [documented] experience in work of this Section.

Edit the following to indicate applicable accessibility code.

  1. Accessibility: Conform to [applicable accessibility code] [____] for accessible locker units.

1.6WARRANTIES

  1. Provide manufacturer’s 5 year warranty against defects in materials and workmanship.

PART 2PRODUCTS

2.1MANUFACTURERS

  1. Products are based upon Metal Handgun Lockers as manufactured by Tiffin Metal Products and distributed by Storage Systems USA (, 800-698-8990)

Edit the following to indicate whether or not substitutions will be permitted for the products in this section.

2.2MATERIALS

  1. Steel Sheet:
  2. ASTM A1008/A1008M.
  3. Recycled content: Minimum 80 percent recycled steel, with minimum 80 percent classified as post consumer.

2.3FABRICATION

  1. Construction:

Include the following for Cube Model 0190.

  1. Frames, bodies, doors, and hinges: Minimum 16 gauge steel.

**** OR ****

Include the following for Vertical Model 0190V.

  1. Frames, bodies, shelves, and doors: Minimum 20 gauge steel.
  2. Body parts flanged and angled to provide rigidity; assembled by welding, bolting, or riveting using corrosion-resistant bolts and aluminum or stainless steel rivets.
  3. Provide mounting holes for attaching lockers back-to-back and side-by-side.
  4. Bottom of lockers lined with felt.
  1. Doors:
  2. Louverless.
  3. Door hinges: 100 degree type.
  4. Number plates: Manufacturer’s standard, sequentially numbered.
  1. Locks:
  2. Security type, replaceable cylinder, proprietary keying system, with 12 gauge locking cam.
  3. Each lock keyed differently and master keyed in one set. Provide [one key] [[____] keys] per lock and [one master key.] [[____] master keys.] Key as directed by Owner.

2.4FINISHES

  1. Steel:
  2. Minimum 5 mil thick factory-applied baked-on textured powder coat finish.

Edit the following to suit project requirements. Refer to current Tiffin Metal Products literature or website for available colors.

  1. Color: [Custom] [____] color [to be selected from manufacturer's full color range].

PART 3EXECUTION

3.1INSTALLATION

  1. Install in accordance with manufacturer's instructions and approved Shop Drawings.
  1. Set plumb, level, and aligned.
  1. Attach lockers to supporting construction with anchors best suited to substrate conditions.
  1. Bolt adjacent locker units together to provide rigid installation.

3.2ADJUSTING

  1. Adjust doors and locks to operate correctly.

END OF SECTION

Tiffin Metal Products10 5113-1Metal Pistol Lockers

08/19/10