Display Hidden Notes to Specifier. (Don't Know How? Click Here) s75

SECTION 08 32 16

VINYL PATIO DOORS

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Royal Building Products; Window and door products.
.
This section is based on the products of Royal Building Products, which is located at:
C Canada
Royal Building Products Plant 1
30 Royal Group Crescent
Woodbridge, ON
Canada L4H 1X9
Toll Free: 866-852-2791
Canada Eastern Region
Royal Building Products Plant 10
1085 Des Cheminots
Lachenaie, QC J6W-0A1
(450) 668-5549
US Eastern Region
Royal Building Products Plant 13
One Contact Place
Delmont, PA 15626
Toll Free: 866-852-2791
US Western Region
Royal Building Products Plant 14
6525 Hardeson Rd.
Everett, WA 98203
Toll Free: 866-852-2791
Web: www.royalbuildingproducts.com
Email: .
Royal Building Products // Window & Door Profiles is North America's leader in vinyl profile extrusions serving the residential home improvement and construction markets. The Royal Window & Door product line is marketed through OEM Window & Door Fabricators. RWDP seeks to differentiate from other extrusion suppliers through a value-added strategy that includes product mix (Custom and Platform Window Profiles, Patio Doors, Trim Systems and Color Solutions) innovation, quality and service.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Sliding Vinyl Patio Doors.

B. Tilt and Turn Patio Doors.

C. Glazing.

D. Accessories.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 05 40 00 - Cold-Formed Metal Framing.

B. Section 06 10 00 - Rough Carpentry.

C. Section 06 20 00 - Finish Carpentry.

D. Section 07 21 26 - Blown Insulation.

E. Section - .

F. Section 07 46 33 - Plastic Siding.

G. Section 07 62 00 - Sheet Metal Flashing and Trim.

H. Section 07 90 00 - Joint Protection.

I. Section - .

J. Section 09 25 23 - Lime Based Plastering.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights.

B. AAMA 303-12 - Voluntary Specification for Rigid Polyvinylchloride (PVC) Exterior Profiles.

C. CSA A440S1, Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights.

D. CAN/CGSB/82.I-M89 - Sliding Doors (Performance Standards).

E. ASTM C 1036 - Standard Specification for Flat Glass.

F. ASTM C 1048 - Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass.

G. ASTM D 4726 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors.

H. ASTM E 283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen.

I. ASTM E 330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.

J. ASTM E 547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Cyclic Static Air Pressure Difference.

K. ASTM E 2190 - Standard Specification for Insulating Glass Unit Performance and Evaluation.

L. ASTM F 588 - Standard Test Method for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact.

M. AAMA 615 - Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Manufacturer's head, jamb and sill details for each unit specified.

4. Installation methods.

C. Shop Drawings: Provide detailed details including elevations indicating size, glazing type and design of each unit type, sections, details, hardware, relationship to adjacent construction, operational clearances and installation details; showing multiple unit connections,

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

E. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) long, representing actual product, color, and section.

F. Manufacturer's Certificates: Certify products meet or exceed specified requirements.

G. Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic checking and adjustment of cable tension and periodic cleaning and maintenance of all railing and infill components.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications:

1. Minimum ten years experience manufacturing vinyl (PVC) windows and doors.

2. Capable of fabricating vinyl windows and doors that meet or exceed performance requirements indicated.

3. Capable of providing documentation of performance characteristics by inclusion in lists and by labels, test reports, and calculations.

B. Installer Qualifications: Installer with experience on projects of a similar size and scope with similar installation conditions.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

3. Refinish mock-up area as required to produce acceptable work.

4. Mock-ups may be incorporated into finished work.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Store products off the ground, out of direct sunlight in manufacturer's original, unopened containers and packaging, with labels clearly identifying product name and manufacturer until ready for installation. Protect from damage.

1.7 SEQUENCING

A. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8 PROJECT CONDITIONS

A. Field Measurements: Verify rough openings by field measurements before fabrication and indicate measurements on Shop Drawings.

B. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.9 WARRANTY

A. Sliding Vinyl Patio Doors limited warranty: 20 years on vinyl and 20 years on seal failure of insulated glass

B. Between the Glass Blinds: 10 year limited warranty for seal failure of insulated glass and a 5 year limited warranty for blinds.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Royal Building Products - Window & Doors, which is located at: 30 Royal Group Crescent; Woodbridge, ON, Canada L4H 1X9; Toll Free Tel: 866-852-2791; Email: request info (); Web: www.royalbuildingproducts.com/en-US/Window-and-Door-Profiles/?LangType=1033

B. Acceptable Manufacturer: Royal Building Products - Window & Doors, which is located at: 30 Royal Group Crescent; Woodbridge, ON, Canada L4H 1X9; Toll Free Tel: 866-852-2791; Email: request info (); Web: www.royalbuildingproducts.com/en-US/Window-and-Door-Profiles/?LangType=1033

** NOTE TO SPECIFIER ** Contact Royal Building Products for local fabricator/installers near the project location and insert the name and address below.

C. Fabricator/Installer: ______

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

D. Substitutions: Not permitted.

E. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Performance ratings for vinyl sliding glass doors vary by product and size. Consult Royal Building Products for more information..

2.2 SLIDING DOORS

A. Size: Provide door sizes and configurations indicated on the Drawings.

** NOTE TO SPECIFIER ** Everest Patio Door utilizes a wood core / vinyl clad frame system. Everest features a slim sash design that is mechanically fastened. With its many glazing options, frame extensions and an available Garden Panel insert, Everest is a great choice for almost any residential application.

B. Sliding Patio Door: Everest Patio Door is a wood frame, vinyl clad, mechanically fastened frame system with vinyl doors reinforced with steel.

1. Performance: Size tested 71 inches by 81-1/8 inches.

a. Meets AAMA/ WDMA/CSA 101./1.S.2/A440-11, Class R-PG40 / PG50-SD for all required performance tests at specific pressures for operating force, air leakage resistance, water penetration resistance, uniform load deflection test, uniform load structural test, and forced-entry resistance.

b. Meets CAN/CGSB/82.I-M89

1) Air Tightness: A3

2) Water Resistance: B3/B4

3) Wind-load Resistance: C3

4) Forced Entry: F1

5) Ease of Operation: E3

* NOTE TO SPECIFIER ** Contact the manufacturer for specific area capabilities.

c. Energy Star: All zones.

2. Frame: Vinyl clad wood core.

3. Exterior Frame Size:

a. Frame Depth:

** NOTE TO SPECIFIER ** Select the size(s) required from the following paragraphs and delete the one not required.

1) 5-5/8 inch.

2) 7-1/4 inch.

b. Width by Height:

** NOTE TO SPECIFIER ** Select the size(s) required from the following paragraphs and delete those not required. Non- standard sizes are also available, contact the manufacturer for additional information.

1) Two door panels, one operable, 58-3/4 inches by 79-1/2 inches.

2) Two door panels, one operable, 70-3/4 inches by 79-1/2 inches.

3) Two door panels, one operable, 94-3/4 inches by 9-1/2 inches.

4) Three door panels, one operable, 85-3/4 inches by 79-1/2 inches.

5) Three door panels, one operable, 103-3/4 inches by 79-1/2 inches.

6) Three door panels, one operable, 139-3/4 inches by 79-1/2 inches.

7) Two door panels, one operable, 58-3/4 inches by 81-3/16 inches.

8) Two door panels, one operable, 70-3/4 inches by 81-3/16 inches.

9) Two door panels, one operable, 94-3/4 inches by 81-3/16 inches.

10) Three door panels, one operable, 85-3/4 inches by 81-3/16 inches.

11) Three door panels, one operable, 103-3/4 inches by 81-3/16 inches.

12) Three door panels, one operable, 139-3/4 inches by 81-3/16 inches.

13) Three door panels, one operable, 86-1/4 inches by 79-1/2 inches.

14) Three door panels, one operable, 104-1/4 inches by 79-1/2 inches.

15) Three door panels, one operable, 140-1/4 inches by 79-1/2 inches.

16) Three door panels, one operable, 87-3/16 inches by 79-1/2 inches.

17) Three door panels, one operable, 105-3/16 inches by 79-1/2 inches.

18) Three door panels, one operable, 141-3/16 inches by 79-1/2 inches.

19) Three door panels, one operable, 86-1/4 inches by 81-3/16 inches.

20) Three door panels, one operable, 104-1/4 inches by 81-3/16 inches.

21) Three door panels, one operable, 140-1/4 inches by 81-3/16 inches.

22) Three door panels, one operable, 87-3/16 inches by 81-3/16 inches.

23) Three door panels, one operable, 105-3/16 inches by 81-3/16 inches.

24) Three door panels, one operable, 141-3/16 inches by 81-3/16 inches.

25) Four door panels, two operable, 115 inches by 79-1/2 inches.

26) Four door panels, two operable, 139 inches by 79-1/2 inches.

27) Four door panels, two operable, 115 inches by 81-3/16 inches.

28) Four door panels, two operable, 139 inches by 81-3/16 inches.

4. Construction:

a. Frame:

1) Vinyl clad wood core.

2) Sloped sill.

3) Full perimeter weatherstripping between frame and panels.

4) Fully reversible-can be assembled to slide left or right.

b. Door Sash

1) Mechanically assembled vinyl sashes with vertical stiles reinforced with galvanized steel.

2) Opening sash with adjustable nylon rollers on anodized aluminum tracks.

3) Interlocking stiles.

4) Single mortise lock.

5) Contemporary handle with double lock mechanism.

c. Screen

1) Heavy duty aluminum extrusions for screen frame.

2) Fiberglass screen mesh.

3) Adjustable Rollers.

5. Options: Provide with the following options.

** NOTE TO SPECIFIER ** Select the option(s) required from the following paragraphs and delete those not required.

a. With nailing fin.

b. Without nailing fin.

c. Exterior key lock.

d. Foot lock.

e. Security bar.

f. Garden style door with embossed vinyl panels.

g. Brick mold 1 inch.

h. Brick Mold 4 inch.

i. Sidelites.

j. Transom.

6. Glazing: Low-E with Argon and XL edge spacer, tinted, glass and grilles.

a. Thickness:

1) 7/8-inch double pane insulating glass.

**NOTE TO SPECIFIER** Select the type of glass required from the following paragraphs Delete glass types not required. Consult with manufacturer for more information.

b. Type

1) Clear tempered glass.

2) Multi-layer, low-E coated, tempered glass.

3) Multi-layer, low-E coated, tempered glass with argon.

4) Obscure, multi-layer, low-E coated, tempered glass.

5) Obscure, multi-layer, low-E coated, tempered glass with argon.

6) Obscure tempered glass.

7) Bronze, multi-layer, low-E coated, tempered glass with argon.

**NOTE TO SPECIFIER** Select the optional decorative grid type, size and color required from the following paragraphs Delete those not required or delete entirely if Decorative grid is not required.

7. Decorative grid:

a. Slimline Grids 1/4 inch by 5/16 inch