All rights reserved by Ogemray
1. Product Instruction
1.1 Product Overview
Under using the current WiFi control technology, our company independently developed and launched T0403 Mushroom Lighting, The upper part of the lamp is white eye-shield light, the below part of the lamp is a color light, the color and brightness could be controlled. It meets the user need for basic lighting and atmosphere adjustment, real-time and timing control will help users control the device anytime and anywhere. Moreover, we embedded shock sensor in it, user could pat the top of light to turn on/off the light, the operation would be more convenient and full of humanity.
1.2 Product Function
l Embedded WiFi module, we can configure the network one step intelligently by mobile APP.
l APP Control, include Android and iOS version.
l Color and Brightness control.
l Lighting dynamic effect (stream/gradual/breathe/flashing).
l Timer switch: set timer task (on/off) through APP, daily/weekly/monthly looping execution.
l Set event reminder.
l Support mechanical control buttons.
l Intelligent protection, user could set the working time to turn off the light automatically.
l Manual factory new.
l Vibration sensor embedded, the white light could be turned on or off by vibration.
l Remind users whether the battery charge is completed via the charging indicator.
2. Product description
2.1 Parameters
Type / Parameters / ValueProduct Information / Dimension(mm) / 155*155*208mm
Electrical Parameter / Rated voltage / DC5V
Rated current / 2000mA
LED Power / 4.5W
Adapter / 5V/2A
IP Degree / IP20
Electric-shock safeguard / III
Optical Parameters / Luminous Flux / Min:45; Typ:50; Max:55
Color temperature / 7000-8000K
CRI / Min:60；Typ:70；Max:80
2.2 Mechanical Structure Information
2.2.1 Product appearance
Mushroom Lamp T0403 product appearance (Front ; Bottom).
2.2.2 Button Features
There is a physical button on the top of the lamp arm, function descriptions is as the following:
Color Light Switch:
l Click the color light switch to turn on/off the color light.
l Double click to conduct shortcut operation for the color light.
l Long press 10s to reset the color light, restore to factory settings (WiFi module working in STA mode), the color light turn red.
l Long press 5s, the color light will switch WiFi working mode between AP and STA.
When the lamp switched to AP mode, the color light will turn to green.
When the lamp switched to STA mode, the color light will turn to white.
Battery Switch:
l To turn on/off the internal battery power supply function.
2.3 Software Information
APP Support : Android 4.0 and iOS6.0 or above.
2.3.1 Wi-Fi Configuration
WiFi network configuration for the lamp is convenient and rapid, mobile could be connected to the specific router quickly, the configuration process is generally less than 60 seconds.
Configuration process: Turn on the device, long press the color light switch 10s to factory new the light, the color light default to STA mode, and the light will turn red. Long press the color switch 5s to WiFi working mode between AP and STA. When the lamp switched to AP mode, the color light will turn to green. When the lamp switched to STA mode, the color light will turn to white.
2.3.2 Wi-Fi Working Mode
T0403 WiFi working mode: STA/AP mode.
If there is WiFi network in the usage scenario, the lamp can work in the two mode. If there is no WiFi network in the usage scenario, the lamp only could be used in AP mode.
Firstly users enter the SSID and password of router in the mobile APP network configuration page, and broadcast via the router, T0403 defaults to STA mode, when the broadcast data from the router is received, the connection is started, if it is repeatedly failed to connect, user can switch to AP mode through the color light switch, at this moment, mobile phone need to be connected with T0403 by AP mode, then mobile phone will send SSID and password of router to device, after received, the lamp will try networking .
2.3.3 System Start-up
T0403 will do the following things after start-up:
1. The lamp would be connected to router with stored parameters automatically, if could not connect to the specific router, T0403 will stay in STA mode, waiting to be configured.
2. The lighting will restore configuration parameters before it is powered off.
2.3.4 System Time
In order to ensure the accuracy of system time, T0403 will synchronize with the phone or the cloud automatically. The timing execution function is based on the system time synchronization.
2.3.5 PWM Dimming Control
The lamp is 4 ways controls with PWM, the duty ratio is adjustable and the hardware has been connected, users just control the lighting app.
R/G/B/W channel output is PWM dimming control mode.
T0403 can control 4 PWM at the same time, PWM is adjusted in the range of 0%-100%, each PWM can be controlled individually, Each channel supports slow PWM regulation, which makes the lighting effect softer and more comfortable.
2.3.6 Timer Function
T0403 has precise system clock, accuracy can reach the second level. The module can support up to 8 timers, three execution modes can be set for each timer: a single execution, weekly looping execution, daily looping execution.
2.3.7 Local/Remote Control
T0403 support local and remote control, when control terminal is in the same LAN with T0403, control terminal will control the device by TCP/IP protocol, when control terminal is not in the same LAN with T0403, control terminal can send commands through cloud to control T0403, main control terminal can be mobile phone, IPad or other control terminal.
3. Using environment requirements
3.1 Suitable temperature and humidity range :
Suitable work temperature ：-10℃-+50℃
Suitable storage temperature ：-20℃ -+85℃
Suitable working humidity ：20%-85%
Suitable storage humidity ：20%-85%
Note：In order to maintain the service life of the product and ensure the performance of the product, please use and store this product in strictly accordance with the environmental requirements.
4. Product Update
T0403 protocol has good openness, there is no limit to the mobile platform, APP supports Android 4.0 and iOS 6.0 or above.
T0403 supports wireless upgrade, When you need to update the device software, the cloud will push the message to APP to notify the user, Users can select to upgrade, After the upgrade operation is started, The system will complete the upgrade automatically, no operation is required for users, Please don’t turn off the lamp within the upgrade process.
5. Disclaimer
This specification is a detailed description of series products produced by the company, Please read carefully and fully understand the detailed specification parameters of the product.
All rights reserved by Ogemray, without permission of our company, The company do not allow to totally or partly copy, translate or simplify this specification for any other usage.
We do not provide any guarantees for the product information, parameters, photos or other links in the specification, users bear the risks.
we declare that this specification or other relevant information without any implied warranties of business assurance or business contract assurance. All information inside is only for operation, product user manual or reference, it can’t be regarded as a basis or complement for any other contract.
We have made reasonable efforts to make this document content accurate and up-to-date.
but our company reserves the right to update or revise the content and relevant information at any time without further notice.