MATERIAL SAFETY DATA SHEET Page 1

Product name:ELS GP 6A

  1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Identification of preparation :Fuel Additive for gasoline

Chemical Family :Esterified Alkenyl Succinic Acids

& several amine derivative.

Product Description:Anti oxidant, Extreme pressure,

Lubricity, Anti corrosion, for

Gasoline Fuel

Supplier: P.T. Triadi Purna Mulya

JALAN PESANGGRAHAN RT 001/03, Bintaro

KEBAYORAN LAMA – JAKARTA SELATAN

TELP. 585-6935; 5852916; 5860193; 5860194.

FAX. 62-21-584-5823

  1. COMPOSITION/ INFORMATION AN INGREDIENTS COMPONENTS

Esterified Alkenyl Succinic Acids ……………………10%.

Fatty amine………………………………………………5%.

Fatty amine carbonate ………………………………….5%.

Tolyltriazole epoxide fatty amine………………………5%.

Dialkyl diphenylamines…………………………… …10%.

Carrier liquid…………………………………………...balance.

3.HAZARDS IDENTIFICATION

Health hazards: Prolong contact may cause sensitization

to skin and eyes. Continued.

Page 2

Enviromental hazards: This preparation does not require

classification on the basis of enviromental

hazard. For more information please see

section 12.

Physical and chemical

hazards/fire and explosions

hazards:

No hazards. Material can form flammable mixture or can burn only upon

Heating to temperatures at or above the flash point.

Decomposes. Flammable/toxic gases will form upon decomposition.

Toxic gases will form during combustion.

See section 5 " fire fighting measures"

  1. FIRST AID MEASURES

Inhalation : Using proper respiratory protection, immediately

remove the affected victim from exposure. Administer artificial respiration if the breathing is stopped. Call for medical attention.

Skin contact: Immediately flash with large amount of water and u use soap if available.

Remove contaminated clothing, including shoes, after Flushing has begun. Avoid prolong contact to skin.

Eye contact: Immediately flush eyes with large amount of water for at least 15 minutes And get prompt medical attention. Continued.

Page 3

Ingestion: DO NOT induce vomiting . if individual is conscious, give milk or water to dilute stomach contents.

DO NOT attempt to give anything by mouth to an unconscious person.

Get prompt medical attention.

  1. FIRE FIGHTING MEASURES

Fire fighting procedures

Used water spray to cool fire exposed surfaces and to protect personnel.

Shut off fuel to fire.

Used foam, dry chemical, or water spray to extinguish

fire.

Special fires precautions

Respiratory and eye protection required for fire fighting personnel.

Avoid spraying water directly into storage containers due to danger of boil over. See also section 4 "first aid measures" as well as section 10.

Hazardous combustion product

Fumes, Smoke,Carbon dioxide(CO2), Carbon monoxide (CO), Oxide of Nitrogen And Oxide of sulfur ( toxic).

  1. ACCIDENTAL RELEASE MEASURES

Land spill:

Contain spill liquid with sand or earth. Recover by pumping or with suitable absorbent.

Consult an expert on disposal of recovered material and ensure conformity

To local disposal regulations.

See section 4 as well as section 10.

Page4

Water spill:

Remove from surface by skimming or with suitable absorbents. If allowed by authorities and enviromental agencies sinking and / or suitable dispersants may be used in non-confined waters.

Consult an expert on disposal of any recovered material and ensure conformity to local disposal regulations.

See also section 4 and 10.

  1. HANDLING AND STORAGE

Storage temperature degree C :max 35-40.

Transport temperature degree C :max 35-40.

Loading and unloading temperature degree C :max 35-40.

Storage/transport pressure : Atmospheric.

Electrostatic accumulation hazard :no, but use proper grounding.

Usual shipping containers :cars, trucks, and drums.

Material and coating suitable :Carbon steel, stainless

Coating.

STORAGE AND HANDLING GENERAL NOTES

Keep container closed. Handle container with care.

Open slowly in order to control possible pressure release.

Store in room temperature and well ventilated place, away from

Incompatible materials.

Do not handle or store near an open flame, source of heat or source of

ignition.

Protect materials from direct sunlight.

Do not pressurize, cut, heat, or weld containers.

  1. EXPOSURE CONTROL / PERSONAL PROTECTION

Engineering control measures/ ventilation :

Page 5

The use of local exhaust ventilation is recommended to control process emission near the source.

Personal protection :

All contact should be avoided by persons with known hypersensitivity to lubricating Oil.

9. PHYSICAL AND CHEMICAL PROPERTIES

These are indicative values only.

Physical state:Liquid.

Form/Color:light yellow

Odor:Mild Hydrocarbon.

Density:0,8805 ASTM 1298

Viscosity 100C cSt:3 ASTM 445

Viscosity Index:97 ASTM 92

Flash Point (COCC):180 C

Pour pointC:3 C ASTM 97

Auto ignition temp.:300 deg.C

Vapor Pressure:Negligible at ambient temp.

Soluble in water:no.

Evaporation rate:Negligible.

10. TAXICOLOGICAL INFORMATION

Inhalation : No hazard at ambient temperature ( -18 to 35 deg C).

Skin contact : No order of toxicity, but prolong contact may cause very mild skin discomfort.

Page 6

Eye contact : Irritating to eye tissue if not remove promptly.

Ingestion : toxicity.

  1. ECOLOGICAL INFORMATION

Environmental mobility

A mineral oil component of this preparation floats and can migrate from water to land.

This is a preparation and enviromental assessment is based on component data and that of similar products.

Enviromental degradability

This preparation is not expected to be readily biodegradable.

Ecotoxicity and bioaccumulation expected to be harmful to aquatic organism. Long term adverse effect to aquatic organisms

12. DISPOSAL CONSIDERATIONS

The following advise only applies to the product as supplied. Combination with other materials may well indicate another route of disposal.

If doubt contact local authorities.

This product is not suitable for disposal by either landfill or via municipal sewers,drains, natural streams or rivers.

Page 7

13. TRANSPORT INFORMATION

Land ( rail road and road )

This product is not regulated for road and rail transport.

Inland waterways

This product is not regulated for inland waterways transport.

Air

This product is not regulated for air transport.

THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATEIAL USED IN COMBINATION WITH ANY OTHER MATERIAS OR IN ANY PROCESS.

SUCH INFORMATION IS TO THE BEST OF OUR KNOWLEDGE AND BELIEVED ACCURATE AND RELIABLE AS OF THE DATE INDICATED.

HOWEVER, NO REPRESENTATION, WARRANTY OR GUARANTEE IS MADE AS TO ITS ACCURACY,RELIABILITY OR COMPLETENESS.

IT IS THE USER'S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY AND COMPLETENESS OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE.