ahg-Top Star
Open 5-finger-glove.
- - White anti-slide coating.
- - Stretch band on the wrist.
Item No. 108
ahg-trigger glove SHORT
The ahg-trigger glove SHORT improves the grip between stock and hand.
Using Mesh material and wind stopper fleece in the back of the hand, an even temperature balance is achieved.
The palm of the hand is made from soft and cuddly Alcantex material with silicone burling to increase the grip and still preserve the feeling on the stock.
Item No. 121
ahg – Shooting Jacket X-DRY Ventilation
-suede leather on the front left part as well as Top Grip pad on the supporting arm improves the grip when in standing position
-X-DRY Ventilation material in the back improves air circulation and avoids heat accumulation inside the jacket; the inner lining on these parts is perforated in order to optimize temperature compensation
-soft leather with air holes as well as 2 shoulder straps reduce material bulges when in prone position and guarantee best possible fit of the hook butt in the shoulder
-the sling attachment has numerous holes and can thus be adjusted individually in height and sideways
-individual fit by help of flat aluminum buttons
-stretch material on the upper left arm provides more flexibility of the supporting arm
-inner lining is made from perforated material for better air compensation
Material: 70 % canvas, 16 % leather, 3 % PES, 6 % PAD, 5 % PVC
Item No.176
Upgrade to sling attachment
Sling attachment can be addedsubsequently to all shooting jackets and slings.
Sling fixing and sling are connected by a special persenning closure allowing one hand
coupling and uncoupling of the sling.
Item No. 339
Rifle Tripod “Germany“
Tripod Made in Germany with following characteristics:
-extremely light and compact construction – weight: 1,5 kg
-Y-shaped pedestal milled from alu
-folding struts on the base can be mounted and dismounted easily
and quickly by means of plug connections
-sunk-in magnets in the struts and the base keep the struts in place
-three-part telescopic bar can be extended contiuously from 68 to 160 cm
-ammo rest is fixed on the telescopic bar and adjusted to the shooting position
-alu plate with anti-slide-coating guarantees safe rest of the weapon
The base’s construction allows a space-saving and ergonomic positioning. This tripod
is demounted quickly and easily without tools and can be stored comfortably in the bag
which is also supplied.
Item no. 460
ahg – prone tripod
The construction of the folding struts on this prone tripod enable the shooter to position the tripod very closely and ergonomically. A ball joint supports the position of the scope.
Folding struts and Y-shaped pedestal are milled from alu and can be mounted and dismounted quickly and easily by means of plug connections.
Sunk-in magnets in the struts and the base keep the struts in place.
This tripod is demounted rapidly and without problems and can be stored comfortably in the bag which is supplied along.
Total weight of prone tripod incl. ball joint: 770 g
Item no. 463
500 pcs. ahg-cotton patches 1”
100% cotton patches for caliber
.22l.r..Ideal for small bore
rifles. Round Size 1”
Item no 504
Anschütz Ceramiccoating
Anschütz Ceramic coatingis a heavy-duty PTFE/Ceramic coating for all types of firearms and knives.
Anschütz Ceramic coating has excellent lubricating qualities, is free from residue and creates a transparent, dry film on the treated surface. Its PTFE-structure bonds firmly with the treated surface and provides long-lasting protection against corrosion, while the Ceramic structures give the weapon a high-polish effect. The functionality and efficiency of the weapon is maintained even in very low temperatures, and the
shooting precision is increased.
Anschütz Ceramic coating is suitable for metal and plastic. Even older weapons will shine after a single treatment.
Effect:
The high-performance coating acts like a ball bearing between galling surfaces. The PTFE/Ceramic mixture has a long-lasting effect. It gives the weapon a highpolish look and diminishes dust adhesion, providing maximum protection from corrosion. Anschütz Ceramic coating evens out microscopically small cracks and grooves and smoothens the treated surfaces enduringly. It thus reduces wear to a minimum
and improves the shooting performance.
Application:
Anschütz Ceramic coating is suitable for almost any metal and plastic surface, even gold and silver ornaments remain protected for a long time. Anschütz Ceramic coating can be applied to all surfaces. It thus provides all-round protection for all parts of the weapon (pistol slides, barrels, triggers, bolts of any kind, and cartridge chambers).
Safety:
Smoothing the treated surfaces largely prevents gunpowder-adhesion. The nongreasing and residue-free lubricating characteristics of Anschütz Ceramic coating prevent malfunction and jamming in firearms.
Advantages:
transparent, residue free, non-greasing coating
suitable for all types of firearms and knives
diminished dust adhesion
long-lasting effect
highly economical
resistant to sea and fresh water
highly temperature resistant (from -40 °C to +750 °C)
item No.
563 Anschütz Ceramic coating for all type of guns and knives 100 ml Aerosol
564 Anschütz Ceramic coating for all type of guns and knives 100 ml fluid
565 Anschütz Ceramic coating for all type of guns and knives 300 ml Aerosol
Forend raiser block Precise PLUS
A new forend raiser with unmatched adjustment possibilities. This carrier’s core is made from aluminum and offers 5 individual snap and/or thread adjustments.
The forend raiser block Precise PLUS simply slides into the stock and is fastened in the required position.
Both resting surfaces are made from plastic and are fixed on the alu carrier with an angle bracket and therefore can be adjusted individually in height, width and angle in order to adjust the contact to the supporting hand. This is especially important if the stock rests on the palm of the shooter’s hand.
Item no. 1010
Side mount sight set (master eye)
Better vision with the other eye.
Many (senior) people have different vision in each eye, nevertheless, our brain equalizes
this difference.
If, in the worst case, a shooter is right handed but has better vision with the left eye, the newly developed ahg-side mount equalizes this disadvantage. This side mount sight set allows aiming with the left eye for right hand shooters or the right eye for left hand shooters
while the rear sight remains on the original prism of the rifle.
For transport in the rifle case, the complete diopter can be detached or only the side mount part. The side mount and the 2-part adapter screw have a toothed profile and an adjustment pin. The position of the side mount can be fixed repeatedly with a clamping screw. The rear sight may remain mounted on the rifle.
Item 1015 sight shift for sight sets, incl. M 18 front sight, fits all common Match rifles
Item 1016 sight shift for sight sets, incl. M 22 front sight, fits all common Match rifles
Qiang Yuan pellets Olympic
Hand selected Qiang Yuan pellets Olympic for air rifle and pistol
Singel packed in plastic boxes of 200 pcs.
Available in Headsizes 4,50 and 4,49 mm / cal..177
Weight 0,53g / 8,2 gr
Item No. 2104
ahg – Muzzle Tube for Anschütz barreled action 2013-U6
The extension of the sight set for 194 mm guarantees precise aiming as well as an improved sight of the whole aim, especially when shooting in prone position.
The additional weight of 107g raises the idleness of the muzzle upon firing a shot and stabilizes the rifle in position.
The muzzle tube can be taken off for cleaning and transport by loosening the clamp screws.
total length approx. 440 mm
sight extension 194 mm
total weight approx. 485 g
item No. 4516
PrismBlockTOWER
The robust two-sided toothed profile of the prism block TOWERallows a simple and sturdy
adjustment in 8 stages without spacers and discs. This offers many advantages especially
when in standing or kneeling position. Head movements when aiming is reduced to a minimum and thus largely avoids tensions in the neck and back. The basic height is 27 mm
and can be raised by 1,5 mm to max. 38 mm.
Due to the long rail of the TOWER, the rear sight can be moved closer to the eye, which is
an advantage for benchrest shooters.
The TOWER is clamped onto the rifle’s prism with spring-borne clips.
Prism block TOWER is allowed in all air rifle and small bore disciplines. Regarding air rifle competitions, pay attention to the 60 mm total height according to rules; measurement is
considered from front sight center to barrel center.
Total weight: approx. 140 g
Item no. 6928 (for all Anschütz rifles)
PrismBlockTOWER PLUS for small bore rifles
The robust two-sided toothed profile of the prism block TOWERallows a simple and sturdy
adjustment in 8 stages without spacers and discs. This offers many advantages especially
when in standing or kneeling position. Head movements when aiming is reduced to a minimum and thus largely avoids tensions in the neck and back. The basic height is 27 mm
and can be raised by 1,5 mm to max. 38 mm.
Bridging the loading platform additionally stabilizes the action and shooting vibrations are
reduced, and this improves shooting performance.
Due to the long rail of the TOWER, the rear sight can be moved closer to the eye, which is
an advantage for benchrest shooters.
The TOWER is clamped onto the rifle’s prism with spring-borne clips.
Prism block TOWER is allowed in all small bore disciplines.
The rear sight rail is 165 mm long and allows attaching sight equipment and accessories.
Total weight: approx. 230 g
Item no. 6929 (for all Anschütz small bore rifles)