Jim Heminway
Vice President, General Manager
Tel: +1 (585) 765-2254
Email: / Digital Alert Systems Contact:
Bill Robertson
Business Development Manager
Tel: +1 (941) 224-6944
Email:
Agency Contact:
Dave Netz
Wall Street Communications
Tel: +1 (303) 329-0359
Email:
Image link:
For Immediate Release
Fusion Communications Deploys DASDEC™-II EAS/CAP Platform and DASDEC-IR Intelligent Remotes for 20 Remote Stations
LYNDONVILLE, N.Y. — July 5, 2011 — Digital Alert Systems (DAS), a division of Monroe Electronics and a leading innovator of next-generation Common Alerting Protocol (CAP) and Emergency Alert Systems (EAS), today announcedthat Fusion Communications, a centralcasting master control and production company, is deploying the DASDEC™-II emergency messaging platform with EAS-Net™ and DASDEC-IR intelligent remotes to provide automatic, seamless emergency alerts for 20 remote TV stations located throughout the United States.
Headquartered in Davenport, Iowa, Fusion Communications’ centralcasting and control services allow itscontract stations to have a fully produced TV station with minimal investment in staff and equipment. To meet EAS/CAP compliance for each station, and to provide notifications quickly, Fusion required an emergency messaging platform that could automatically communicate local alert data to the company’s Davenport facility, where it could be immediately sent out on air.
“When it comes to emergency alerts, the nature of our business poses a unique challenge,” said Jeff Lyle, president of Fusion Communications. “If an alert is issued locally for one of our stations, it needs to be sent to the operation center in Davenport before it can go out over the air. As we have seen from the recent tragedies in Joplin and other communities, lives are at stake and every second counts. So in addition to meeting EAS/CAP compliance, our alert process needed to be a seamless, flawless loop. And for that we turned to Digital Alert Systems’ DASDEC platform.”
Fusion has installed a DASDEC-IR unit in each remote station. The DASDEC-IR units automatically communicate EAS data via an IP network to the central DASDEC-II hosts at the Davenport facility via Digital Alert Systems’ exclusive EAS-NET communications protocol software. Each DASDEC in Davenport can handle up to five DASDEC-IR units by utilizing the Digital Alert Systems’ MultiStation™-5 software. From Davenport, Fusion can easilyuse DASDEC’s Web-based user interface to monitor all messages and alerts for all 20 stations.
The DASDEC-II provides core EAS and CAP functionality in a small single-box design. It is available with integrated receivers; advanced hardware interfaces for easy adaptability to ever-evolving technology changes; simple software upgrades that don’t requireun-cabling, unracking, opening the case, removing parts, and reassembling the system; and a network-centric perspective using common Web browsers and leveraging common informationexchange protocols. The system meets all FCC Part 11 rules and conforms to FEMACAP V1.2 and IPAWS 1.0 standards, allowing broadcasters to reduce headaches andsubstantially improve operational efficiency for just a little more than adding a CAPconverter to their legacy EAS equipment.
“The DASDEC system has worked very well for us, especially with the severe weather over the past few months for our stations in the Midwest,” added Lyle.“The DASDEC-IR boxes have been very busy, but they haven’t skipped a beat. As we build our services and add additional stations, we know we can count on the strong integration support of Digital Alert Systems to expand our EAS system.”
“Fusion Communications is a unique company with unique requirements, and our DASDEC implementation at itsremote stations really demonstrates the capabilities of our systems,” said Bill Robertson, business development manager at DAS. “We’ve all been reminded lately of the importance of emergency alerts and how they can save lives. Fusion is providing its stations with more than a compliance solution; it’s a completely streamlined system that overcomes the obstacles of distance and time.”
Further information about Digital Alert Systems’ EAS products is available by phone at +1 (585) 765-1155 and online at
# # #
About Fusion Communications
Fusion Communications is the ultimate convergence of media.Fusion and its predecessors have been part of the Quad Cities community for almost 20 years.Started in 1992 as EBI Video & Film, Fusion has grown into a multimedia hub designed to fuel the growth and profitability of broadcasters, cable andsatellite television networks, and Internet media operators. More information can be found at
About Digital Alert Systems
Digital Alert Systems is a leading innovator of next-generation Common Alerting Protocol (CAP) and Emergency Alert Systems (EAS). The company was formed in October 2003 when the founders determined that IP-based technologies could lower the cost of EAS encoders/decoders, improve operations, and offer more avenues to increase the effectiveness of emergency communications in the future. In October 2009, Digital Alert Systems merged with Monroe Electronics to further extend its product offerings and better serve their collective customers well into the future. Based in Lyndonville, N.Y., Monroe Electronics provides R&D, manufacturing, sales, and customer service for the Digital Alert Systems brand. The company continues to retain its hard-earned reputation for quality, reliability, innovation, and service to valued customers around the world. More information is available at
All trademarks appearing herein are the property of their respective owners.
ENDS