EXPERT ADVISOR MANUAL
CLIENT SETUP GUIDE.
What is the purpose of the Robot? 1
What the robot is basically doing? 1
What is the minimum of capital? 2
Can I play manually in the same account? 2
How do I start the robot? 3
1 – Put the files ThirdBrainFx.ex4 at the good place 3
2 – Close Metatrader 4 4
3 – Relaunch Metatrader 4 4
4- Allow the good permissions going to Tools > Options or doing CRTL+O 4
5 – Add the URL in the URL area for WebRequest : 5
6 – Attach the expert advisor to the EURUSD M1 charts (only ONE TIME and THIS charts only). 5
7 – Click on OK and attach this EA to the EURUSD M1 CHARTS : 7
8 – Wait for results ! 7
What is the purpose of the Robot?
The Robot is not a classic expert advisor. Indeed the code of the intelligence is centralized on our server and will be served to your expert advisor in your account.
The EA “alone” without connection to our server is then useless and won’t operate alone.
All account running under the system are monitored to detect potential issues, opportunities and learn from experience.
Then each additional client brings additional information to the learning system and the result of all trading are improving.
The main goal of the Robot is to raise success rate of traders by giving them accurate signal with an accurate lot size
What the robot is basically doing?
The robot can trade all the instrument of your account. You will need only to attach it in EUR/USD M1 (see the documentation on how to install on the website) and it will takes care of all instrument.
The robot manages your account automatically and adapt the lot size , minimizing the drawdown.
The goal of the robot during the first(s) week(s) will be to survive with your account and step by step giving you back some money.
We want steady profit and very low drawdown.
All the logic of the EA is to give you that with time.
What is the minimum of capital?
There is no minimum to start with the EA even we don’t advice to start under 100 USD
Can I play manually in the same account?
Yes, we even build it to allow that. When you will some lots to play manually, this lot will be unavailable for the robot but the robot is computing a maximum lot size your account can support. The Robot will continue to play with the room you will let …no worry. You won’t be sur-exposed then and the robot behavior will stay the same as we were not playing manually.
How do I start the robot?
Follow this steps.
The robot is the software called “ThirdBrainFx.ex4”
1 – Put the files ThirdBrainFx.ex4 at the good place
Go to Files > Open Data Folder > MQL > Experts and save the files ThirdBrainFx.ex4 here
2 – Close Metatrader 4
3 – Relaunch Metatrader 4
4- Allow the good permissions going to Tools > Options or doing CRTL+O
Check the box like after :
5 – Add the URL in the URL area for WebRequest :
Add the URL : http://mt4.thirdbrainfx.com/receive-signal-nucleus.php
6 – Attach the expert advisor to the EURUSD M1 charts (only ONE TIME and THIS charts only).
Click on “Common” Tab and check you have the checkbox like this : If not, change them to have exactly the same screenshots.
Click on the “Inputs” tab
You need to fill an email to receive any alert or notification.
The activation key is needed and you need to buy it in our website :
https://www.thirdbrainfx.com
The activation key do the setup. It’s a onetime fee when you start to use the robot. This fee is non refundable and let you play the first 6 months.
After 6 months, you need to take a licence to continue the journey. You will receive in your email the way to purchase the licence and/or you can buy one in the website too. You have several choices of licences and several way to add time to your subscription.
If you don’t know what the magic number is, don’t change it. You can change it if you have other expert advisor running on the same account which are using the SAME Magic Number.
If you want to limit the number of position this EA will open, just put another number from 1 to 4.
The maximum position this EA will open will be 4. If you put 5 for example, the system will stop at 4.
The Risk by default is 1.0 and it’s a conservative risk
You can reduce this rate or raise it as far as you want but 4 will be “gamble”. Becarefull to not put 0.0 as the EA won’t work with this figure.
7 – Click on OK and attach this EA to the EURUSD M1 CHARTS :
After some dozens of seconds, you should have this kind of screenshot with a “Connection OK” displayed. Be patient as the “Connection OK” may take sometimes to appear.
8 – Wait for results !
What it will happen now ?
The EA will begin to wait for information from our server and will open trades. When there is no trades running, the first trade may take sometimes even up to 24 hours to appear. Just be patient and no trades will popup while the market is closed (depending on your time zone it will be from friday to sunday)