[Date] / [Project Name]
[Project Location]
SECTION 16500
TITLE: LED Shelves
°eluma; Aluminum Frame LED Shelves
Display hidden notes to specifier by using "Preferences”/”Tools"/"Options"/"View"/"Hidden Text".
Element Designs Inc. – Custom& functional aluminum frame glass products
This section is based on products by Element Designs, which is located at:
235 Crompton Street
Charlotte, NC 28732
Toll Free: 877-32203396
Phone: 704-332-3114
Fax: 704-332-3267
Web: www.element-designs.com
E-mail:
Element Designs is the leading manufacturer of aluminum frame glass cabinet doors & illuminated aluminum frame LED panels. All products are custom manufactured to the specifier's requirements. Element Designs’ manufacturing plant is in Charlotte, NC and ships product throughout North America through a network of 100 dependable distributors.
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Aluminum Frame LED Panels for applications such as shelving, signage, or panels
1.2 RELATED SECTIONS
* NOTE TO SPECIFIER* Delete any sections below not relevant to this project; add others as required
A. Section 06410 – Custom Cabinets
B. Section 08810 – Glass
C. Section 10440 – Interior Signage
D. Section 12320 – Manufactured Wood Casework
E. Section 12350 – Specialty Casework
F. Section 16522 – LED Lighting
G. Section 16540 – Classified Location Lighting
H. Section 16550 - Special Purpose Lighting
1.3 REFERENCES
A. ETL (Intertek Testing Labortory) Certified
* NOTE TO SPECIFIER * Clarification of ETL vs. UL
Both ETL & UL are privately owned, Nationally Recognized Testing Laboratories (NRTL) as recognized by OSHA and local inspectors. UL is the largest in the United States, while ETL is the largest worldwide. No mark is better than the other, each serving as proff of product complaince to US & Canadian standards.
1.4 SUBMITTALS
A. Submit under provisions of Section 01300
B. Manufacturer’s data sheets on product being used, including: frame LED panel.
1. Technical Manual
2. Installation Instructions
1.5 QUALITY ASSURANCE
A. Installer Qualifications: Licensed Electrician
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer’s unopened packaging until ready for installation.
B. Store in dry, protected, well ventilated area and protect from damage.
1.7 PROJECT CONDITIONS
A. Maintain environmental conditional (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimal results. Do not install products under environmental conditions outside manufacturer’s absolute limits.
1.8 WARRANTY
A. Provide manufacturer’s one-year warranty
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Element Designs Inc., which is located at: 235 Crompton Street / PO Box 7747; Charlotte, NC 28273 / 28241; Toll Free Tel: 877-332-3396; Tel: 704-332/3114; Fax: 704-332/3267; Email: ; Web: www.element-designs.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
A. Substitutions: Not permitted.
B. Requests for substitutions will be considered in accordance with provisions of Section 01600.
2.2 Aluminum Frame LED Panels
A. Approved Product: Element Designs’ °eluma; aluminum frame LED panel.
1. Profiles:
** NOTE TO SPECIFIER ** Delete the aluminum frame profiles not required in project
a. EL001: 20mm (¾”) x 20.5mm (13/16”) profile in natural aluminum finish
b. EL001S: 20mm (¾”) x 20.5mm (13/16”) profile in brushed stainless steel finish
c. EL001B: 20mm (¾”) x 20.5mm (13/16”) profile in black powdercoated finish
d. EL001W: 20mm (¾”) x 20.5mm (13/16”) profile in white powdercoated finish
e. EL001ORB: 20mm (¾”) x 20.5mm (13/16”) profile in oil rubbed bronze powdercoated finish
f. EL002: 12.5mm (½”) x 32mm (1 ¼”) profile in natural aluminum anodized finish
h. EL002S: 12.5mm (½”) x 32mm (1 ¼”) profile in brushed stainless steel look anodized finish
i. EL002B: 12.5mm (½”) x 32mm (1 ¼”) profile in black powdercoated finish
j. EL002W: 12.5mm (½”) x 32mm (1 ¼”) profile in white powdercoated finish
j. EL002ORB: 12.5mm (½”) x 32mm (1 ¼”) profile in oil rubbed bronze powdercoated finish
2. Inserts:
** NOTE TO SPECIFIER ** Delete the aluminum frame profiles not required in project
a. 6mm (¼”) tempered glass with 1.4mm (1/16) etched lines
b. 6mm (¼”) tempered glass with 6mm (1/4”) etched lines
3. LED Color Temperature
** NOTE TO SPECIFIER ** Delete the LED Color temperature not required in project
a. Warm: 3500K (recommended for residential environments)
b. Daylight: 6500K (recommended for display & commercial environments)
c. RGB: color changing LED (recommended for any environment)
4. Power Supply*
** NOTE TO SPECIFIER ** Delete the power supply not required in project
b. 60W Transformer** - FCC rated & short circuit protected
* Manufacturer: Tresco International – substitution NOT permitted
** 60W Transformer will support up to 20 LF of LED output
5. Power Distribution System
** NOTE TO SPECIFIER ** Delete power distribution system not required in project
a. Adjustable system using magnet/power bar system
b. Fixed location system using extensions
6. RGB Controller
a. RF touch color ring controller with dynamic color changing and static mode options
PART 3 EXECUTION
3.1 EXAMINATION
A. Do not begin installation until all products are properly prepared and tested.
3.2 INSTALLATION
A. Install in accordance to manufacturer’s instructions.
B. Disassembly of aluminum frame lED panel voids manufacturer’s warranty.
3.3 PROTECTION
A. Protect installed product until completion of project.
END OF SECTION
[Author][File Name] / [LED Lighting]
[16500] – [1]