Mailbox settings Step Description
1. Right-click the main interface "System Settings" -> "Network Settings" -> "E-Mail", as shown below:

2. After entering the E-Mail setup interface, you need to configure the following:

l  (E-Mail Function: Select Open)

l  (SMTP Server: Enter the format smtp.live.com)

l  (Port: set to 25)

l  (Username: your mailbox user name (eg: your mailbox is then your username is )

l  ( Password: Enter your email password)

l  ( Encryption Type: Default: Do not choose, If you click on 'test' but it shows failed, then modified the type to SSL)

l  (From: Enter your full email address (eg: ))

l  (To: Enter your email to receive alarm messages (eg: ))

l  (theme: default on, you can change your own theme named)

l  (interval: time interval to receive mail (if an alarm is triggered a high frequency, the time interval is too short can cause a mailbox full))

l  ( Health mailbox on: normal operation for detecting input DVR)

l  ( Health mailbox interval: the number of minutes during normal operation if the video recorder to send a message to the recipient that you set at intervals)

l  (As shown below:)

3. After finishing the above settings, click the Test, show success, as shown below:

4. When you're finished click "OK" two clicks of the mouse right-click OK to save

5. The video detection trigger E-Mail, the main interface, right-click the "System Settings" -> "Channel Setup", you need to detect the type of E-Mail triggered there, select the "motion detection", "video loss" or "video block", check "E-Mail notification", click OK, as shown below:)

6. The alarm detection trigger E-Mail, the main interface, right-click the "System Settings" -> "Recording Settings" -> "Alarm Settings", a "channel", "work mode", "alarm duration", "video channel" settings, check the "E-Mail notification," click "OK", as shown below:)

7. When you are finished, if some triggered event occurs, you set the recipient mailboxes to receive mail event information. As shown (here is the motion detection QQ mailbox to receive mail messages received by the trigger occurs)