Ref. 202/KUC&T/2016

Date 12-11-7-2016

Call for Tenders

KU College of Engineering & Technology, Kakatiya University, Warangal, T.S.

Sealed tenders are invited for the following items. The deadline for the receipt of the tender by post is 26-07-2016, 5.pm.The postal address is Principal, KU College of Engineering & Technology, Gundlasingaram Road, Hanamkonda. Warangal-506009. T.S.

MECHANICAL ENGINEERING

DYNAMICS OF MACHINERY

Sl.No. / Item / Qty
1 / Motorized Gyroscope / 1
2 / Static and Dynamics Balancing Apparatus / 1
3 / Whirling of Shaft Apparatus / 1
4 / Governor apparatus –Watt,Porter,Proell and Hartnell governors / 1
5 / Cam Analysis –DOM006 / 1
6 / Vibration Lab (Universal Vibration Apparatus) (Model no: DOM 007)Spring mass system
Equilibrium spring mass system ( forced vibrations), Torsional vibrationsNatural frequency / 1

MEASUREMENT AND METROLOGY

Sl.No. / Item / Qty
1 / Vernier Height guage 0-300mmX0.2mm Mitutoyo / 1
2 / Vernier Caliper 0-150mmX0.2mm Mitutoyo / 1
3 / Bevel Protector 0-360 Deg. German Make / 1
4 / A.Sine Bar 250mm INDIAN Make
B. Sine Center Indian make 200mm / 1
5 / Floating carriage diameter measuring machine 3 wire testing with std Acc… INDIAN / 1
6 / Digital Micrometer Mitutoyo: 0-25m / 1
7 / BORE GAUGE 35-60.mm Mitutoyo / 1
8 / Slip Gauge set / 1
9 / Ring Gauge 10mm i)Plain ii)Thread / 1
10 / Plug Gauge 10mmi)Plain ii)Thread / 1
11 / Pneumatic Dial Comparator
  1. Digital Electronic comparator
  2. Mechanical comparator
  3. Holding stand for above item N.9b
/ 1
12 / Mitutoyo Portable surface Roughness Teaster / 1
13 / Profile Projector -Optional Accessories Projection lens – 100X200/.02 / 1
14 / Spirit Level 200/.02 / 1

FLUID MECHANICS LAB

Sl.No. / Item / Qty
1 / Meta centric Height Apparatus / 1
2 / Flow Through Notch Apparatus / 1
3 / Flow Through Orifice & Mouth Piece Apparatus / 1
4 / Closed circuit Apparatus for determation of losses in pipelines due to sudden contraction, / 1
5 / Pipe Friction Apparatus / 1
6 / Calibration Test Rig for Venturimeter / 1
7 / Calibration Test Rig for Orifice Meter / 1
8 / Bernoulls Apparatus / 1
9 / Reynolds Apparatus for Demonstration of stream lined and Turbulent flow / 1
10 / Calibration Test Rig for Rotometer / 1
11 / Pitot Tube Apparatus / 1

Hydraulic Machinery Lab

Sl.No. / Item / Qty
1 / Multistage certificate pump 1 HP test rig / 1
2 / Reciprocating Pump test rig 1 HP / 1
3 / Gear pump test rig 1 HP Without oil / 1
4 / Jet pump 1 HP test rig / 1
5 / Submersible Pump test rig 1 HP / 1
6 / Pelton Turbine Test rig with 15 HP centrifugal Pump / 1
7 / Francis Turbine Test rig with 15 HP mixed flow pump / 1
8 / Kaplan Turbine test rig with 20 HP mixed flow pump / 1
9 / Impact of jet on vanes apparatus / 1
10 / Hydraulic Ram Test rig / 1
11 / Model of pump & Turbine impellers / 1

Heat Transfer

Sl.No. / Item / Qty
1 /
  1. Thermal Conductivity of Insulating Powder.
E Equipment should consist of Heater of 500 W, Heater power control, Power Measurement, T temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200. / 1
2 /
  1. Heat Transfer from vertical tube by Natural Convection.
Equipment should consist of Heater of 250 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200 0C, Electronic Dimmer, voltage current measurement devices, Vertical Tube. Etc,., / 1
3 / Heat Transfer through pin fin by natural and forced convection.
Equipment should consist of Heater of 350 W, Heater power control, Power Measurement, Air flow measurement (orifice U tube Manometer and flow control valves), Pin Fins oof Brass Aluminium Copper rods of 12 mm Dia and 150 Length., Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to200 0C etc. / 1
4 / Heat Transfer by forced convection.
Equipment should consist of Heater of 1200 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200 0C, Air flow measurement (orifice U tube Manometer and flow control valves), Centrifugal Blower 1 H.P Motor etc.., / 1
5 / Heat Transfer through composite walls.
Equipment should consist of Heater of 500 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200 0C, Electronic Dimmer, voltage current measurement devices. Chamber made of wood. Composite plates etc., / 1
6 / Emissivity of test plate.
Equipment should consist of Heater of 250 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200 0C, Electronic Dimmer, voltage current measurement devices. Chamber made of wood. Composite plates etc. / 1
7 / Heat Transfer through metal rod.
Equipment should consist of Heater of 250 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 200 0C, Electronic Dimmer, voltage current measurement devices. etc., / 1
8 / Parallel and counter flow heat exchangers.
Equipment should consist of Heater of 250 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator. Electronic Dimmer, voltage current measurement devices. Cold water and Hot water flow pipes. Water flow measurement, measuring jar etc. / 1
9 / Heat transfer through two slab gaurded apparatus.
Equipment should consist of Heater of 500 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator range of 0 to 2500C, Electronic Dimmer, voltage current measurement devices. Two slab guarded etc. / 1
10 / Heat transfer through heat pipe.
Equipment should consist of Heater of 250 W, Heater power control, Power Measurement, Temperature measurement,08 to 10 Thermocouples, Digital temperature indicator ,Electronic Dimmer, voltage current measurement devices. Pipe, etc / 1
11 / Estimation of Stefan Boltzmann’s constant.
Equipment should consist of Hot water sources ISI make, Temperature measurement multi point digital temperature indicators, Time measurement, 08 to 10 Thermocouples / 1
12 / Calibration of thermocouple. / 1
13 / Hydraulic analogy of heat conduction equipment. / 1

ELECTRONICS & COMMUNICATION ENGINEERING

ELECTRICLA & ELECTRONICS ENGINEERING

COMPUTER SCIENCE & ENGINEEING

INFORMATION TECHNOLOGY

S.No. / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Anshuman Microprocessor Kits (8086) including interfacing Kits (ADC,DAC stepper motor LED LCD Traffic light controller) / 15 / 01
2 / 8051 microcontroller kits including interfacing kits / 10 / 01
Slno / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Xilinx ISE design tools / 5 / 01
2 / MATLAB R2014 4a / 5 / 01

Exixting Components in MWE lab:-

S.No. / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Reflex Klyston bench set up / 1 / 01
2 / Circulators / 1 / 01
3 / Magic tee / 1 / 01
S.No / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Reflex Klystron bench set up / 04 / 01
2 / Gunn diode bench set up / 04 / 01
3 / Circulators / 04 / 01
4 / Directional couplers / 04 / 01
5 / Magic tee / 04 / 01
6 / Serial data link & modem / 01 / 01
7 / Optical source detector and fiber characteristics / 02 / 01
8 / E plane tee / 02 / 01
9 / H plane tee / 02 / 01
10 / Standard gain horn antenna / 02 / 01
11 / Fixed attenuator (3dB and 6dB) / 02 / 01
12 / Isolator / 02 / 01
13 / SS tuner / 02 / 01
14 / Bends (E&H type) / 02 / 01
15 / Parabolic antennas / 02 / 01
16 / Phase shifters / 02 / 01
17 / Dialectic material / 01 / 01
S.No. / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Regular power supply / 6 / 01
2 / Function Generator / 10 / 01
3 / Ammeters / 10 / 01
5 / 01
S.No. / Name of the component / Required Quantity / Quote your Rate only for one Item
1 / Amplitude modulation & Demodulation Kits / 03 / 01
2 / Frequency modulation & Demodulation kits / 03 / 01
3 / Balance modulation kits / 02 / 01
4 / Pulse modulation kit
(PAM,PPM,PWM) / 03 / 01
5 / Sampling theorem verification kits (Natural sampling Flat top sampling) / 03 / 01
6 / Digital carrier modulation kits (ASK,BFSK,BPSK,DPSK,QPSK) / 03 / 01
7 / Digital storage oscilloscope (color) / 02 / 01
8 / Spectrum Analyzer / 01 / 01
9 / Pulse code modulation kit with Tx and Rx / 02 / 01
10 / Delta modulation kits / 02 / 01
11 / Channel TDM using pulse amplitude modulation and demodulation. / 02 / 01

Sd.

Principal