8+2 Gigabit Poe Switch (8 POE Port)

8+2 Gigabit PoE switch (8 POE port)

PS2010G

Overview

PS2010G POE switch supports IEEE802.3at Standard，the maximum transfer distance is 100meters，supply power for device support IEEE802.3af/at standard,so the user does not need to worry that the PoE switch would damage the non poe device.And also when the PoE device is disconnected,the PoE switch will stop providing power. With simple and reliable design,PS2010G can identify the PoE demand ,speed,duplex,and use the cable type Auto Uplink automatically. PS2010G mainly used in wireless AP and IP surveillance,it can simplify the wiring of installation and reduce the cost.

Features

▪8 10/100/1000Mbps PoE port , 2 gigabit SFP port

▪Support IEEE 802.3af/at Standard

▪Maximum transfer distance is 100meters

▪Power for wireless AP and IP surveillance over Cat5 cable

▪Store-and-forward switching method

▪LED indicators for each port

▪Bandwidth:20Gbps

▪Internal 150W power supply

▪Support L2 web management

▪Automatically detects the PoE class level of a Powered Device

▪Support Single Output automatic protection function and with Self-recovery capabilities

▪Plug & Play

▪One year limited warranty

Technical Specification

Interface / 10/100M/1000Mbps Auto-Negotiation RJ45 ports with poe（10 PoE ports）
Transmission Rate / 100M/1000Mbps Full-duplex,
network interface：100BASE-T / 1000BASE-TX RJ-45 port
Features / Bandwidth：16Gbps (Non-blocking）
Network delay（100 to 100M bps）：max. 20 microseconds（64-byte packet size）
Buffer Memory：96KB
the address database size：1,024 MAC
Frame Filtering and transmission rate：
10M max for port 14,800pps
100M max for port 148,800pps
1000M max for port 148,8000pps
Network Protocol and Standards / IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
L2 web interface / IP address:192.168.0.2.1
User name:admin
No need for Password
LEDs Indicators / System：power, PoE max power
speed,connect,active,PoE error of each port
Power supply / Max power：150W（for port 1-8）
Physical Specifications / Dimensions：280mm *180mm *44 mm
Weight：2.5kg
Environmental / Operating Temperature：0°~40°C（32°~104°F）
Operating Humidity：10%~ 90%，no-condensing
Certification / CE, FCC, Rohs
Warranty / 1 year limited warranty

User Guide

1.Check the PoE switch

Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.

Connect the poe switch with power,make sure the initialization of poe switch is available as below:

POE indicator is off at the beginning when power connected.

POW indicator is on and keeps.

Other indicators will be on ,then off after one or two seconds.

2. Connection cables

1)Connected the Switch to Computer or other PD( like IP camera, wireless AP) by CAT5 or 6 cables

2) Connected the Switch and the power cord to AC plug

Caution

1) All operation should be provided only by a qualified service technician.

2) Make sure the PDs you connected to the Switch are compliant with IEEE 802.3af/at.

3) Make sure the power is off before unplugging the power adapter.

4) Makes sure all PoE PDs power consumption is less than total power

5) Please avoid any heavy thing placed on the Switch.

6) Do not use this product near water, for example, in a wet basement or near a swimming pool.

7) Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

8) For outdoor use, the Switch itself should be housed inside a

protective enclosure.

9)Cutting power during a firmware upgrade can damage your device.

10)Only use attachments/accessories specified by the manufacturer.

11)Opening the switch or tampering with the warranty sticker can void your warranty.

2