Demonstrating Unisource

The Unisource Floor Cleaning and Maintenance System offers a tremendous opportunity for Ipax Guangzhou Environmental Technology and the Chinese Market.

Unisource eliminates the need to strip and wax floors. It provides the same appearance and protection of a waxed floor surface without the time and at a lower cost.

Unisource offers a number of significant benefits:

  • PRODUCT SAFETY: Unisource offers safety in two ways that cannot be offered in a waxed surface:
  1. Safety for those maintaining the floors. Unisource is principally made from pure vegetable soaps and natural pine oils. It contains no harsh chemicals. Therefore protective gloves, masks, and equipment are not needed. Also, the air quality for the workers will be better than if harsh chemicals are used for maintenance.
  2. Safety for those using the floors. Unisource does not increase the slipperiness of the floor the way a waxed surface does. This means the floor is safer for all who walk on it.
  • Health Issues: Floor wax is a potential breeding ground for bacteria. Unisource contains no wax, and does not allow bacteria to live or grow. The recent SARS epidemic has created increased awareness of the dangers of bacteria, and Unisource protects the floor without serving as a breeding ground for bacteria.
  • PRODUCT VERSATILITY: Unisource works on all types of flooring surfaces - -ceramic tile, vinyl, marble, terrazzo, wood. The product also works with all types of flooring equipment, d
  • Reduced labor costs. Unisource saves labor. Since floors do not have to be regularly stripped, Some Unisource users have saved as much as 45% on their floor maintenance labor costs.

The following pages provide step-by-step instructions for maintaining floors with Unisource.

EQUIPMENT AND SUPPLIES NEEDED TO DEMONSTRATE UNISOURCE

  • Unisource
  • Dust mop
  • Mop
  • Bucket
  • Spray bottle

You should also have the following available at the customer’s location where you are demonstrating:

  • Water source
  • Floor scrubbing machine with buffing capability

SIX EASY STEPS TO A UNISOURCE FLOOR

1. Dust mop the floor

2. Mix 16oz. UNISOURCE with 1 Gallon of Water.

Mop generously on floor:

  1. Scrub with scouring pad, keeping surface wet. Pass machine both across and along floor to ensure complete removal of old finish. Repeat if necessary.

4. Remove all dirt and sludge with wet vacuum or mop.

5. Damp Mop Floor with clean solution of UNISOURCE and water. Use 8 oz. UNISOURCE per gallon of water (1:16 dilution).

Allow to dry

6. Polish, using red pad high-speed or burnishing machines may be used for faster results.

IF A HIGHER LEVEL OF GLOSS IS REQUIRED:

Spray-buff floor, using 8 oz.
UNISOURCE with 16 oz. water.
(2:1dilution)

Finally, dust mop floor.