NOTE:

The following part numbers I have collected from various aprilia forums.

Thanks to all who contributed. If you have anything to add to this file, please email me at so I can update the file.

Oil Filter Part No's


OEM (Aprilia) p/n 0256187
PerfForm p/n APR-OF2
K and N Filters p/n KN - 152
AMSoil p/n SMF-121
Champion / Champ Labs p/n RB-X312

HiFlo HF152 - made in Malasya

Aprilia Part # 0256187, the Champion RB-X312 (OEM)
Cardy, in France sells an equivalent with their part # FHM152

Oil filter cover O-ring and an oil drain crash washer.
Washer D8x16x1.5 > 8121862 $6.99
O-Ring> 0650500 $10.99

BMW uses the same parts for the F650. BMW part numbers:
Washer D8x16x1.5 >46 51 2 345 500
O-Ring >11 41 7 654 013

(BMW parts are CHEAPER)

Air Filter

Aprilia Part # 8104169(OEM)
K&N AL-1002 air filter that fits Capos

Fuel Filter:
Ducati equivalent, part #: 1x 42540101A Filter and 2x 74140931A hose clamp.

Valve Clearance Intake: 0.005 - 0.007 inch, 0.12 - 0.17 mm

Valve Clearance Exhaust: 0.009 - 0.011 inch, 0.23 - 0.28 mm

Wheel bearings:

Front : Bearings 6005-2RS 25x47x12 (2 required)
Seal 30x47x7 (2 required)
Rear : Bearings 6304-2RS 20x52x15 (1 required) & 6204-2RS 20x47x14 (1 required)
Seal 30x52x7 (1 required)
Sprocket carrier : Bearing 6305-2RS 25x62x17 (1 required)
Seal 35x62x7 (1 required)
All seals are single lip type.

Front Wheel Bearing:

OEM Aprilia Front Wheel Bearing For CapoNord part# 8125869 (#14 in diagram)

OEM Aprilia Gasket Ring - #8203074 For 2001-2006 ETV Caponord, Position 16 in the diagram:


OEM is made by CCVI model is 6005 RS
Search on Google for "6005 wheel bearing"
SKF part number: 6005-2RSI/C3
Sealed spherical roller bearings: 25 mm internal diameter, 47 mm outside diameter, 12 mm thick

STARTER RELAY (SOLONOID): Caponord can also use Yamaha Virago starter Solonoid (relay) part # 4KD-81940-00. These are 100Amp relays which is what is supposed to be in Capo instead of 50A found in some models.

NEW!!!! Aprilia starter relay Part # AP 8112927 made by Hitachi and is 150A

Brake Pads:

EBC Front FA209/2HH Rear FA266HH
Ferodo Sinster Grip Road Front FDB2006ST Rear FDB2074P
Aprilia Front 8113988 Rear 8113751
SBS Front SBS674 Rear SBS730
Dunlopad Front DP623 Rear DP631
Goodridge Front G169ST-2 Rear G253ST-1
CarbonLorraine Front 2396 A3 Rear 2827 RX

Ferodo Platinum Rear Brake Pads (FDB2074P)

Ferodo Platinum Front Brake Pads (FDB2006P)

For ease of finding replacement pads, the Caponord shares the same front caliper as all models of the BMW F650, and the Aprilia Pegaso model years after 1997

For ease of finding replacement pads, the Caponord shares the same rear caliper as rear the Aprilia RSV, the Aprilia SL and the following Ducatis: 750SS and SSIE after model year 1999, 900SS and SSIE after model year 1999, ST2, ST4 and ST4S

Manufacturer / Front / Rear / Notes
EBC / FA209HH/2 / FA266HH / Don't forget you need two sets for the front (two pads per caliper). The organic Green pads are the same part number, just remove the HH from the end.
Ferodo / Sinster Grip Road FDB2006ST / Platinum # FDB2074P
Aprilia / 8113988 / 8113751
SBS / SBS674 / SBS730
Dunlopad / DP623 / DP631
Goodridge / G169ST-2 or 3 / G253ST-1
CarbonLorraine / 2396 A3 / 2827 RX / Do not use S1 on the front.

The correct p/n is FA209/2 for organic pads and FA209/2HH for metallic pads.

BTW, the front pads are the same as on the Pegaso and BMW F650. BMW p/n 3411 2345 445.
The rear pads are common with the Falco, Tuono, Ducs ST2-3&4, MultiStrada, etc

Brembo Caponord Front Brake Rotor Left Side (BR08.4899.63)

Brembo Caponord Front Brake Rotor Right Side (BR08.4899.64)


Chain and Sprockets:

Chain 525 110 link the choice is yours ie gold x ring hd etc.
Front sprocket 17t 61600-17
Front sprocket 16t 61600-16
rear sprocket 35804-45
Chain and sprox kit 03589551

525 O-ring, 112 links
Drive sprocket: 17 tooth originally, some have gone to 16
Driven sprocket: 45 tooth

DID Premium VM 525 Gold X-Ring Chain (PUD18525VM2120)

Tires:

Front tire: 110/80R19 Width 110, aspect ratio 80, 19" rim, speed rating V (>130mph, >210 kph) OEM: Metzeler Tourance
Rear tire: 150/70R17 Width 150, aspect ratio 70, 17" rim, speed rating V (>130mph, >210 kph) OEM: Metzeler Tourance

The Triumph Tiger, BMW R1150GS and Suzuki V-Strom use the same size tires as the Caponord. It must be "V" (240 km/h, 149 mph) for the Caponord, and the only tyres in this code are Metzeler Tourance, Pirelli Scorpion and Michelin Anakee.

Spark plugs: Plug gap: 0.024 - 0.028 inch, 0.6 - 0.7 mm

NGK R DCPR9E (OEM)
NGK Platinum DCPR9EVX
NGK Iridium DCPR9EIX
same plug is listed for all 1000 v twins.
DCPR9EIX NGK IRIDIUM
DCPR9E NGK STANDARD
XU27EPR-U DENSO REGULAR PLUGS
IXU27 DENSO IRIDIUM PLUGS (TWICE THE PRICE OF NGK)

OEM Aprilia Ignition Coil (8124864)

Renault coil (needs to be modified) part # 8200380267

brake lever from the Ducati 748-916. It was a perfect match. Then I thought that the Ducati also do an anodised gunmetal blade,.

Battery

Yuasa YTX 14-BS (OEM)
This battery is also used by the Yamaha 900 Diversion and the Yamaha FJ1200A non-ABS models after model year 1991

BMW parts that fit Aprilias

Passenger footpegs are the same with BWM R1150GS, F650GS but cost-wise I'm sure this means nothing.

Replacement Windscreens

Ermax model 1080119 is 10 cm taller than the stock shield, is available clear, smoked or colored
Ermax model 2080119 is also available
Givi also makes a shield that is about 10 cm taller than the stock shield.

Hugger for rear wheel

Secdem, in France, sells a rear hugger (like the front fender, but for the rear wheel), although it seems they don't like to deal internationally.

Quick Disconnects for fuel tank: (with thanks to Stu O for this info)

These are Colder part numbers. They're all chrome-plated brass. These coupler bodies do not have a shrouded latch lever like OEM. Otherwise, they're identical to the OEM pieces in form, fit, and function. If I have any fears about accidental unlocking due to lack of a shroud, I'll secure a cable tie around the fitting with the catch positioned under the fitting's latch lever.

1/4" barbed coupler bodies - Colder part# LCD17004 - two required. $15.11 ea.
1/4 NPT male fuel pump fitting - Colder part# LCD24004. $9.60
3/8" barbed unvalved return line male fitting - Colder part# LC22006 - $4.30

While you're working on the fuel line, make sure you check out Stu_O's other fuel mod!

Go to COLDER PRODUCTS PART # LCD24004 Scan down and you will find part# LCD24004. No picture but does have male pipe.

http://www.af1racing.com/store/Scripts/prodList.asp?idCategory=526

OEM Aprilia High Driver saddle, black ra -#8793683

OEM Aprilia Biconical Handlebar # AP8796735

Handlebar only: Accossato AGTRM00

Thanks to all who contributed. If you have anything to add to this file, please email me at so I can update the file.