Amorim Flooring NA Division 9 09 62 29 Cork Flooring
- PRODUCT NAME
Corkcomfort floating HPS (High Performance Surface)
- MANUFACTURER CONTACT
Amorim FlooringNorth America
2600 Cabover Drive Suite A
Hanover, Md. 21076
Tel: 410-553-6062
Fax: 410-553-6123
E-mail:
- Product Description
APPLICATIONS
A nominal 300mm x 300mm x 3.2 mm tile floor covering with a cork agglomerated core layer made of cork granules and an acrylic formaldehyde free binder, a genuine cork veneer, a transparent Polyvinyl Chloride wear layer, a top coat of an acrylic nano beads based lacquer and an opaque Polyvinyl Chloride underlay. The elements are glued together using a PVA water-based adhesive. The cork veneer can be painted using a Polyurethane water-based ink.
Designed to withstand the high traffic put on the finish of commercial floors, WicandersS2000 is constructed with cork that is 100% formaldehyde free (Acrodur®). The high wear resistant surface is protected by a special surface treatment HPS.
Perfect applications could be schools, day care, government offices, churches, retail spaces, hospitals etc.
PRODUCT SIZES
Tile Size: 300mm x 300mm x 3.2mm
600mm x 300mm x 3.2mm
FINISHES
Corkcomfort floating HPS finish on top of the hard wearing surface above the cork layer. This
combination makes the product extremely resistant to wear, scratch, slip, scuff and stain. HPS is based on nano technology where extremely tiny beads are embedded in the top layer giving the whole surface improved properties. The “High Performance Surface” is designed for high traffic commercial floors.
WARRANTY
Corkcomfort floating HPS floors have a25 year residential and a 15 year commercial warranty against wear through.
- TECHNICAL DATA
ASTM Standards
ASTM D2859 Standard Test method for Flammability
3.68 PASS
ASTM F 925 Standard test method for Resistance to Chemicals of Resilient Flooring White Vinegar, Rubbing Alcohol, 5%Sulfuric Acid, Household Bleach, Household Ammonia, Kerosene, Olive Oil, Unleaded Gasoline
No Observed Effect
ASTM E662-03 Standard test Method for specific Optical Densityof Smoke Generated by Solid Materials
Non Flaming 409.8 Flaming 302.8
ASTM C 518-04 Steady State Heat Flux Measurements and Thermal Transmission Properties By Means Of the Heat Flow Meter Apparatus
R-value- 0.16
ASTM D3884 Wear resistance Using Taber Abrader Model 5130 using H-18Wheels
Weight loss: 0.00077 gr/100 cycles
# of cycles: 6800
ASTM C1028 Static Coefficient Friction
Dry:0.88; Wet:0.79
ASTM 989-89 Impact Sound Transmission Test over a Concrete Floor with a drop ceiling
Impact Insulation Class (IIC) 53 db
ASTM 413-87 Sound Transmission Class (STC) 53 db
Amorim Flooring NA,2600 Cabover Drive, Suite A Hanover, MD 21076
Tel 410-553-6062 Fax 410-553-6123 email: