SETUP

LANGUAGE,SLIDESHOW DURATION,SLIDESHOW MODE,,MUSIC REPEAT MODE,MOVIE REPEAT MODE,DISPLAY MODE,TV SYSTEM,AUTORUN eight options in SETUP function.Via UP/DOWN/LEFT/RIGHTand ENTERkey to setup,and press EXIT key to quit the menu setup after finishing.

TFT MENU

9 options : brightness, contrast, color, hue, language, FM, mode switch, screen turn and reset.

Press TFT MENU, enter the menu, select the option you want to alter , you can adjust its value by VOL＋/VOL－.

FM frequency:

Press MENU till select FM, you can choose the frequency points by VOL＋/VOL－.The system supply nine frequency points—87.8, 87.9, 88.0, 88.1, 88.2, 107.7, 107.8, 107.9, 108.0.No matter which one you choose, make your car radio frequency in accordance with it, like this, you can receive the music from the radio.

Specifications

Product name: Car rear-view LCD color Monitor

Screen dimensions: 7 inch

Number Of dots: 480×234 (RGB)

Aspect ratio:16：9

Contrast Ratio: 400:1

Response Time: B→W 50ms W→B 30ms

Viewing Angle：(U/D/L/R)65° 40° 65° 65°

Power supply:12V DC

Automobile storage battery (12V) automobile adapter

Power consumption: around 10W

External dimensions: width250 mm × height108 mm ×thickness23 mm

Weight: 480g

Thank you for using our product. We are pleased with the joy and convenience brought to you by our product. For better use and maintenance of the product, please read through this user manual before using and pay attention to the followings:

1. Do not open the casing if with no authorization to avoid electric shock caused by inner high voltage. If there is any problem, please switch off the monitor immediately and then inform our company or our dealers.

2. Do not expose the monitor to moisture, dust, oil smog, direct sunshine or environment affections. The monitor’s operation temperature range is 0℃-40℃; the monitor’s storage temperature range is -20℃-60℃.

3. Do not use diluents or other chemical detergents. Use soft cloth to remove dust or dirt on the monitor.

4. Use matching cable only and correct connection is required. The maximum car voltage is 12V. Lower the voltage if it is over 12V for use.

5. Use the AC adapter, battery pack and auto mobile adapter that come with the monitor only.

Caution:

For your safely, do not watch MONITOR or turn the monitor on while driving.

It is against the law to watch and operate a MONITOR while driving.

Special Caution:

We strongly recommend have qualified technician or maintenance Engineer install this device.

If this LCD MONITOR does not work well, check the connection fist, Then the fuse if it the connection is ok.

The main function and characteristic

  1. Support NTSC and PAL.
  2. Support memory card like SD/MMS/MC.
  3. Support MPEG1, MPGE2, DAT, MPEG4, DIV, DIVX,AVI,VOB, RMand RMVB video files.
  4. Support MP3, WMAaudio files.
  5. Support JPEG(JPG),BMP,GIF pic files
  6. Multi-language OSD.
  7. FM audio output, supply more frequency points, and it is convenient to receive the sound from the car radiogram.
  8. It can play TXT files.
  9. Support various playing methods of picture:ordinal,random, menu demand, pause, enlarge, reduce,circumrotate, enantiomorphous, etc.
  10. Two video input with reversing function.

Exterior Description

1. Remote Window

2. Up

3. Menu

4. Down

5. AV1/AV2

6.Power on / off

7. LCD Screen

8. SD/USB input

Connection and Installation

(1) Red for positive power+12V

(2) Black for negative power

(3) Green/Blue for reversing device

(4) Yellow1 for AV1 input

(5) Yellow2 for AV2 input

Installation: (See the figure bellow)

Basic operations

Controller Basic Operations

Figure: Remote Controller Panel

Note

A. Point the remote controller to the infrared receiver on the monitor when in usage.

B. Avoid pressing, dropping, submerging or disassembling of the remote controller..

C. Avoid pressing buttons continuously and quickly. Interval between two operations must be at least 2 seconds.

1. POWER : power on/off

2. V1/V2/DPF:choose AV1/AV2/DPF

3. AV : choose TV/DPF/AV1/AV2

4. USB/SD:DPF menu setup

5. up/down/left/right

6.  PLAY STOP PREVNEXT REV FWD

7. EXIT to return

8. MUTE

9. MENU:enter TFT menu

10. VOL-,VOL+ to adjust the values of the TFT LCD MENU