Sweep the Floors Completely to Ensure a Dust-Free Surface

DAILY CLEANUP

NAME
______
State Skills Standards:
1.1 The student will demonstrate adherence to general shop and site
safety rules including but not limited to those listed in the
following performance indicators.
1.1.1 Demonstrate proper use of safety apparel at all times, including but not limited to, eye protection, hearing protection, skin protection, head protection, footwear and protection from airborne particulate matter.
1.1.2 Demonstrate the safe handling, storage and disposal of chemicals, materials and adhesives in accordance with local, state, and federal safety and environmental regulations (OSHA, EPA, HazCom, MSDS, etc.)
1.1.3 Demonstrate continuous awareness of potential hazards to self and others.
1.1.4 Demonstrate appropriate construction-related safety procedures.
1.1.5 Inspect extension cords for the presence of a functional ground connection prior to use.
1.1.6 Place and secure ladders when appropriate.
1.1.7 Demonstrate awareness of personnel and activities near the work area.
1.1.8 Report hazards found on the job site to their supervisor/teacher.
1.1.9 Explain basic first aid procedures for treating cuts, burns, and electrical shock.
1.1.10 Demonstrate proper fall-protection practices and use of safety devices at all times.
DIRECTIONS : FIND YOUR POSTED JOB FOR THE WEEK, DO THE JOB DESCRIBED, AND GET THE APPROPRIATE JOB INITIALED BY THE INSTRUCTOR TO RECEIVE 1 POINT PER LAB DAY FOR EACH INITIAL AT THE END OF THE GRADING PERIOD. **** DO NOT LOSE THIS PACKET ****
YOU WILL NEED TO HAND IT IN AT THE END OF THE GRADING PERIOD FOR POINTS TOWARDS YOUR FINAL GRADE

SWEEP FLOORS

Sweep the floors completely to ensure a dust-free surface.

Fridays- Vacuum behind the radial arm saw and check the shop for built up dust.

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

BENCH TOPS AND STOOLS

-All hand tools must go back into cabinet 9

-All lumber must be returned to the long and short racks

-Fasteners must be put back in their proper drawers-cabinet 15

-Make sure all tops are clear of all tools and materials

-Brush table tops completely and flip the stools on the corners of the tables- 4 stools per table

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

HAND TOOLS

All hand tools must be returned to cabinet 9 in their proper places

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

PORTABLE ELECTRIC AND PNEUMATIC TOOLS

Make sure all portable tools are back in their proper cabinets

Cabinet 7-Routers Cabinet 8–Circular saws Cabinet 10-Belt sanders

Cabinet 11-Finish sanders

Cabinet 12- Saber saws & Drills

Cabinet 13&14 Pneumatic Nailers

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

LUMBER RACKS

Any material lying around the shop that is reusable must be place in the short rack or long racks. Any materials on top of the short rack must be sorted accordingly with its proper compartment.

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

FINISHING ROOM

All finish materials must be tightly sealed and placed neatly on the shelves in the yellow cabinet. Any rags or towels lying on the counter or floor must be place in the red fire proof containers. All finishing room tools must be placed in the yellow cabinet on the top shelf.

Fridays- Sweep the floor in the finishing room

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

LARGE & SMALL BANDSAWS

Brush the machine off completely.

Fridays- Open the doors of the saw and vacuum the inside

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

TABLE SAWS

Clear the machine of all material, hand tools, etc. and put everything in its respected spot in the shop. All tools for the table saw go in or on the rolling cart under the table saw. Brush the machine completely.

Fridays- Open the bottom cabinet doors and vacuum out the inside of the saw cabinet.

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

WOOD LATHES

Place all tools and plates in proper areas on the lathe board and brush the machine completely

Fridays- Vacuum inside of lathe cabinets

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

SURFACER- PLANER

Brush machine completely

Fridays- Open side doors and vacuum machine

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

SHAPER TABLES

Brush machines completely

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY

______

RADIAL ARM SAW

All scrap wood must be placed in the proper long or short racks. Clear the tables of any tools and brush the machine completely.

Fridays- Vacuum behind the radial arm saw