Text for tenders /

AMFLO® MAG Pro

Flange connection JIS B2238 10K

93333 / AMFLO MAG Pro DN25 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 25, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 25
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes:Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 0.7/18m3/h
Permanent flow rate Q3:16/ m3/h
Permanent flow rate qp:3.5 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93334 / AMFLO MAG Pro DN32 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 32, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 32
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes:Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 1.2/30m3/h
Permanent flow rate Q3:25 m3/h
Permanent flow rate qp:6 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93335 / AMFLO MAG Pro DN40 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 40, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 40
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes:Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 1.8/45m3/h
Permanent flow rate Q3:40 m3/h
Permanent flow rate qp:10 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93336 / AMFLO MAG Pro DN50 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 50, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 50
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 2.8/70m3/h
Permanent flow rate Q3:63 m3/h
Permanent flow rate qp:15 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93337 / AMFLO MAG Pro DN65 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 65, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 65
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 4.8/120m3/h
Permanent flow rate Q3:100 m3/h
Permanent flow rate qp:25 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93338 / AMFLO MAG Pro DN80 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 80, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 80
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 7.2/180m3/h
Permanent flow rate Q3:160 m3/h
Permanent flow rate qp:40 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93339 / AMFLO MAG Pro DN100 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 100, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 100
Installation length:250 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 11.3/280m3/h
Permanent flow rate Q3:250 m3/h
Permanent flow rate qp:60 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93340 / AMFLO MAG Pro DN125 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 125, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 125
Installation length:250 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 17.7/440m3/h
Permanent flow rate Q3:400 m3/h
Permanent flow rate qp:100 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93341 / AMFLO MAG Pro DN150 JIS 10K PP
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 150, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 150
Installation length:300 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Polypropylene
Electrodes::Stainless steel AISI 316L
Temperature range:0...60 °C
Flow rate Q(0.4m/s)/Q(10m/s) 25.4/640m3/h
Permanent flow rate Q3:630 m3/h
Permanent flow rate qp:150 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93342 / AMFLO MAG Pro DN200 JIS 10K Ebonite
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 200, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 200
Installation length:350 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Ebonite
Electrodes::Stainless steel AISI 316L
Temperature range:-30...80 °C
Flow rate Q(0.4m/s)/Q(10m/s) 45/1100m3/h
Permanent flow rate Q3:630 m3/h
Permanent flow rate qp:150 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93343 / AMFLO MAG Pro DN250 JIS 10K Ebonite
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 250, PN 10
Nominal diameter:DN 250
Installation length:450 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Ebonite
Electrodes::Stainless steel AISI 316L
Temperature range:-30...80 °C
Flow rate Q(0.4m/s)/Q(10m/s) 70/1700m3/h
Degree of protection:IP 67
93381 / AMFLO MAG Pro DN300 JIS 10K Ebonite
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 300, PN 10
Nominal diameter:DN 300
Installation length:500 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Ebonite
Electrodes::Stainless steel AISI 316L
Temperature range:-30...80 °C
Flow rate Q(0.4m/s)/Q(10m/s) 100/2500m3/h
Degree of protection:IP 67
93382 / AMFLO MAG Pro DN350 JIS 10K Ebonite
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 350, PN 10
Nominal diameter:DN 350
Installation length:550 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:Ebonite
Electrodes::Stainless steel AISI 316L
Temperature range:-30...80 °C
Flow rate Q(0.4m/s)/Q(10m/s) 140/3400m3/h
Degree of protection:IP 67
93384 / AMFLO MAG Pro DN25 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 25, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 25
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes:Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 0.7/18m3/h
Permanent flow rate Q3:16 m3/h
Permanent flow rate qp:3.5 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93385 / AMFLO MAG Pro DN32 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 32, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 32
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes:Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 1.2/30m3/h
Permanent flow rate Q3:25 m3/h
Permanent flow rate qp:6 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93386 / AMFLO MAG Pro DN40 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 40, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 40
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes:Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 1.8/45m3/h
Permanent flow rate Q3:40 m3/h
Permanent flow rate qp:10 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93387 / AMFLO MAG Pro DN50 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 50, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 50
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 2.8/70m3/h
Permanent flow rate Q3:63 m3/h
Permanent flow rate qp:15 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93388 / AMFLO MAG Pro DN65 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 65, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 65
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 4.8/120m3/h
Permanent flow rate Q3:100 m3/h
Permanent flow rate qp:25 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93389 / AMFLO MAG Pro DN80 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 80, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 80
Installation length:200 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 7.2/180m3/h
Permanent flow rate Q3 160m3/h
Permanent flow rate qp:40 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93390 / AMFLO MAG Pro DN100 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 100, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 100
Installation length:250 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 11.3/280m3/h
Permanent flow rate Q3:250 m3/h
Permanent flow rate qp:60 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93391 / AMFLO MAG Pro DN125 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 125, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 125
Installation length:250 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 17.7/440m3/h
Permanent flow rate Q3:400 m3/h
Permanent flow rate qp:100 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93392 / AMFLO MAG Pro DN150 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 150, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 150
Installation length:300 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 25.4/640m3/h
Permanent flow rate Q3:630 m3/h
Permanent flow rate qp:150 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93393 / AMFLO MAG Pro DN200 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 200, PN 10
Optional with approvals as
water meters after OIML R49 (Q3) or as
hydraulic sensor for heat meters after EN 1434 (qp)
Nominal diameter:DN 200
Installation length:350 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 45/1100m3/h
Permanent flow rate Q3:630 m3/h
Permanent flow rate qp:150 m3/h
Classification OIML R49/EN 1434:R160/25
Degree of protection:IP 67
93394 / AMFLO MAG Pro DN250 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 250, PN 10
Nominal diameter:DN 250
Installation length:450 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 70/1700m3/h
Degree of protection:IP 67
93395 / AMFLO MAG Pro DN300 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 300, PN 10
Nominal diameter:DN 300
Installation length:500 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 100/2500m3/h
Degree of protection:IP 67
93396 / AMFLO MAG Pro DN350 JIS 10K PTFE
Magnetic Inductive flow sensor
AMFLO® MAG Pro DN 350, PN 10
Nominal diameter:DN 350
Installation length:550 mm
Flange connection:JIS B2238-10K
Nominal pressure:PN 10
Lining:PTFE
Electrodes::Stainless steel AISI 316L
Temperature range:-20...100 °C
Flow rate Q(0.4m/s)/Q(10m/s) 140/3400m3/h
Degree of protection:IP 67
80272 / Messumformer MAG PRO HV
AMFLO® MAG Pro Transmitter
Compact version with graphical display , 16 characters x 2 lines,
programmable over internal keys or programming interface via pc.
With empty pipe detection and low flow cut off, suitable for bidirectional measuring.
Measuring accuracy:max. 0.4 % of reading in range of 1...10 m/s
Min. conductivity:20 µS/cm
Current output:0/4 – 20 mA, max. Load 800 Ohm
2digital outputs (Open Collector):programmable as pulse-,frequency-
or status- output,
max. 1250 Hz, 100 mA, 40 VDC
electrically isolated
Power supply:90 – 265 VAC, 45 – 65 Hz, 5 VA
Ambient temperature:0...50 °C
Degree of protection:IP 67
80332 / Messumformer MAG PRO LV
AMFLO® MAG Pro Transmitter
Compact version with graphical display , 16 characters x 2 lines,
programmable over internal keys or programming interface via pc.
With empty pipe detection and low flow cut off, suitable for bidirectional measuring.
Measuring accuracy:max. 0.4 % of reading in range of 1...10 m/s
Min. conductivity:20 µS/cm
Current output:0/4 – 20 mA, max. Load 800 Ohm
2digital outputs (Open Collector):programmable as pulse-,frequency-
or status- output,
max. 1250 Hz, 100 mA, 40 VDC
electrically isolated
Power supply:18 – 60 VDC, 3 W
Ambient temperature:0...50 °C
Degree of protection:IP 67
80331 / Messumformer MAG PRO HV blind
AMFLO® MAG Pro Transmitter
Compact version without graphical display, configuration interface for programming via pc.
With empty pipe detection and low flow cut off, suitable for bidirectional measuring.
Measuring accuracy:max. 0.4 % of reading in range of 1...10 m/s
Min. conductivity:20 µS/cm
Current output:0/4 – 20 mA, max. Load 800 Ohm
2digital outputs (Open Collector):programmable as pulse-,frequency-
or status- output,
max. 1250 Hz, 100 mA, 40 VDC
electrically isolated
Power supply:90 – 265 VAC, 45 – 65 Hz, 5 VA
Ambient temperature:0...50 °C
Degree of protection:IP 67
80333 / Messumformer MAG PRO LV blind
AMFLO® MAG Pro Transmitter
Compact version without graphical display, configuration interface for programming via pc.
With empty pipe detection and low flow cut off, suitable for bidirectional measuring.
Measuring accuracy:max. 0.4 % of reading in range of 1...10 m/s
Min. conductivity::20 µS/cm
Current output:0/4 – 20 mA, max. Load 800 Ohm
2digital outputs (Open Collector):programmable as pulse-,frequency-
or status- output,
max. 1250 Hz, 100 mA, 40 VDC
electrically isolated
Power supply:18 – 60 VDC, 3 W
Ambient temperature:0...50 °C
Degree of protection:IP 67

ast_amflo-mag-pro_jis_e.doc09.20101/14