VITOBA PARTHASARATHY
Position: Lead Production Operator Education Level:3
Experience:11yearsOil & Gas /Heavy Chemicals
Relocation:Yes – Internationally
JOB OBJECTIVE
EnsureSafe & Smooth operations of the plant by operating various equipments, monitoring & controlling process parameters and mainly without polluting our environment.
PROJECT PROFILE
Lead production operator with good exposure in commissioning activities and as Panel Operator controlling both Onshore and Offshore Operations well-reputed in Oil and Gas Industry Chemical Companies. Operational & Testing, and Startup of Operation Equipments and Troubleshooting of various plants and systems
M/s.Brunel Energy
Designation:Lead Production Operator (on-shore)
Duration: Jan 2010 to Till Date
Client:CAIRN ENERGY INDIA & O.N.G.C. INDIA
M/s.Kharafi National K.S.C (Closed) Kuwait
Designation: Lead Production Operator
Duration: July 03 to Jan 2010
Client: Joint operation - Kuwait (KGOC/ CHEVRON)
Reliance Engineering
Designation:Production Operator (off-shore)
Duration: 15 April 2001 to March 2003
Client: Worked for O.N.G.C
M/s. SPIC—Southern Petrochemical Industries Corporation Limited (Heavy Chemical Division )Chennai-600068
Designation: Plant Trainee
Period:Nov 99 to Feb 2001
Summary of Experience:
JOINT VENTURE(CAIRN ENERGY INDIA & O.N.G.C INDIA) Mangala ProcessingTerminalis an On-Shore Oil FieldCompany which operates in BARMER Rajasthan.
Well Experienced in Commissioningand Startup process Operation activities.
Preparation of Isolation confirmation certificates for commissioning of equipments and pipelines.
Performing walk through and Marking the punch list clearance forFuel gassystem, Fixed Roof storage Tanks, Oil, Water, Gas Separators, Pumps, Oil & Gas Gathering Station,TankFarm Compressors, Heat exchangers & condensate recovery (fin fan coolers) and associated systems
Taking responsibilities to carry commissioning activities such as Steam blowing, Boil-out and dry-out of steamboiler, equipments (blowers, pumps & compressors).
Nitrogen purging (Inertization) & Leak Testing of all Critical Systems Prior to Introduce of Hydrocarbons in to the systems.
Ensure all necessary work Permits like Hot workpermit,Confined space , Licenses and other Compliance requirements are in place prior to commissioning activities
Co-ordinating with Commissioning Crews to improve process and close-out report.
Well knowledgeabout of process PFD, P&ID’s and ability to cross check punch list drawings as per design safety scope.
Co-ordination with Control Room Engineers to understanding & Cross checking of Cause and Effects for all control Valves.
Lock of system as per Isolation confirmation certificates CAR SEAL close/open as per standards producers of Safe Startup & Process Operation producers.
Worked with atmosphere temperature minimum of @ -- 2 dec cent and Maximum Temp @55 dec cent
JOB DESCRIPTION
COMMISSIONED IN CENTRAL PROCESSING FACILITY UNIT
DEHYDRATOR UNIT
GAS DEHYDRATION UNIT
CRUDE STABILIZATION UNIT
TANK FARM
GAS COMPRESSION AND GAS PLANT OPERATIONS
CHEMICAL INJECTIONS system
NITROGEN UNIT /UTLITY AIR COMPRESSOR
H.P & L.P- KNOCK OUT DRUM AND FLARE
Responsibility
Coordinating start up and safe shutdown of the plant in planned and emergency situations. Trouble Shooting of Equipments.
Monitor control panels or onsite instruments in accordance with standard plant operating procedures and instructions, thus ensuring a continuous check on the efficient running of the plant and equipment.
Operates equipment and facilities in accordance with instruction from the supervisor, takes immediate action in case of any abnormal function, disturbance or alarm by adjusting process parameters in accordance with sops and report the abnormalities from time to time.
Go through log book for previous data, remarks etc and maintain it .As well, logs operating incidents occurring during shift for records and for counterpart on the next shift, and discuss incidents with supervisor.
Shut down the plant partially or totally incase of emergency and starts it up again in accordance with insurance from higher authority. As well perform normal and planned shutdown for maintenance.
Maintaining highest level of safety for personnel, equipment and installations.
Ensure dosing of chemicals on time, collect and record the details of consumption and stock.
Maintaining safety in all aspects of plant operation and maintenance jobs and create a culture of safe practices across all functional groups.
Familiar with work permit system. Gas testing, mechanical & isolation procedures and co-ordination with maintenance crew, trouble shooting, reporting etc
Experience in operation of centrifugal pumps, reciprocating dosing pumps with variable speed and stroke, screw compressors, reciprocating compressors, centrifugal compressors, centrifugal pumps and rotary valves.
Handled shell and tube type heat exchangers, double pipe exchangers, electrical heater, condenser, Reboiler etc.
Various flow measuring, level measuring temperature measuring, pressure measuring, weight measuring instruments.
Handling and Familiar with the following units in Cairn Energy India Ltd., Rajasthan.
Up to 130,000 BOPD Process terminal, Cluster Well Pads,
Individuallycharged in handling 1, 25,000 BOPD with Yokogawa Centum XL DCS at Mangala Processing Terminal, Rajasthan.
Commissioning of Oil Processing and Water Injection plant.
Pig Receiver and Launcher, HIPPS, Slug catcher, Production separator, Steam Heat Exchanger,
Dehydrator ,
Settling Tank, Depurator,
Export oil Tank, Export Oil Pumps (Nuovo Pignone), Sales Meter.
Water Injection plant: Steam Turbine Driven Pumps (Nuovo Pignone), Walnut Filters.
Well Head Operations:
Well Testing, Inspection & Operation of Christmas tree. Flow Line Flushing Job, SSV, and SSSV & storm Choke Operations. Flow line Choke changing, STHP, FTHP,Well Equalizing Well Actuation, Tubing Hanger Seal Leaking, Back Pressure Value Operation, Gas Lifting, Well Annulus Pressure Bleeding, safety value testing, lower and upper Master value, wing value, Well opening, closing operation & Trouble Shooting etc.
Oil & Gas Gathering Station (PIG RECEIVERS & LAUNCHERS)
Operation Of Pigging (Receiving And Launching) In All Gas, Oil & Water Pipelines. Using Foam Pig, Intelligent Pig, semi-intelligent, Mechanical Pig with Brush, Chemical Pig etc.
Operation & control of wells through different headers for optimum production, oil manifolds,oil & gas/on line pigging operations.
Crude Stabilization Unit:
Duties include the Control Room Operations by DISTRIBUTED CONTROL SYSTEM, SCADA (Supervisory Control and Data Acquisition) Operation. Handling Three Phase Separators, oil reading, HP, and MP & LP Separators. Handling, degassing vessels & skim tank handling, well fluid oil, gas and water Level, Pressure maintenance in Control Panel operation LCV, PCV operation & controller operation. Oil sample taking BSW checking, Low pressure Separator, Degassing boot, Settling tank, Stripper, Storage Tank etc.
Central Production Facility and Tank Farm:
Receiving crude from different gathering station Slug catcher,De-gas boot, Settling tank, dehydration tank. Produced water tank skimmer tank, storage tank, and emulsion treatment by electrostatic heater treatedDemulsifier injection pumps, injection rate calculation, Crude transfer pumps, and LACT(Least Automotive Custody Transfer) unit.
Crude Oil Pumping Station:
Familiar in oil & gas processing system main tank, intermediate tank operation, change over, M.O.V. Operation, water disposal, Tank Evacuation, positive isolation, Bottom Oil Transport, Bottom oil receiving tank Pump, Booster Pump, Main oil pump operation,Metering Oil & pumping system of shipping products (Tanker Loading), lube oil pressure maintenance etc.
Gas Dehydration Unit:
Natural Gas Dehydration (8 trays), Coalecer filter, Glycol Contactor, Glycol flash drum, Cartridge type filter operation, Lean/ Rich Glycol Contactor, Glycol flash drum, Charcoal, Cartridge type filter operation, Lean/ Rich Glycol Heat Exchanger, Glycol /Gas Heat
Exchanger, All filter changing, Glycol Regeneration, Still Column, Glycol pumping, Tank Level, Dew point maintaining (khan Sensor). Taking of plant shutdown and start –up operation. Pre& Super Heater’s for fuel gas. Heating& Heat Exchangers. Fuel gas, stripping gas, pilot gas & Blanket gas Supply.
Gas Sweetening Unit:
Methyl Di-ethanol Amine (MDEA) is used to absorb the H2S from the sour gas. It consists of two sections, Absorption section is Amine Contactor and Amine regeneration section. Operation and control of the Absorber, Knock Out Drum, Heat Exchangers and maintain the MDEA temp.Control the level of rich amine flash drum, Rich/Lean Amine exchanger, Regenerator, Control the lean amine flash drum, operation of vapour compressors and Reflux pumps.
Gas Compressor Unit:
Handled different types of Gas Compressor (Reciprocation , Centrifugal Gas Compressor Start up & Shut down , Cylindrical lube oil Maintenance , Compressor unit pre lube oil level, engine crankcase oil level maintenance ,Coolant water level RPM setting, inter collar operation, Temperature maintenance, Scrubber pump operationFuel gas Filter separator operation.
Water Injection:
Lube oil pump. Booster pump, Main pump & Inhibitor pump operation. Lube oil pressure Maintain cooling water pump operation. Lube oil level maintain. Chemical Injection, Water sample, M.O.V operation, Vibration check. SpeedTrouble shooting, etc.Inject high pressure water & Steam into well reservoir, operation & Maintenance of multistage compressors, Scrubber, intercoolers, after coolers, Separator Start up & shut down operations of Compressor.
Pump Operation:
Centrifugal & Reciprocating pumps Start up & shut down operation. Lube pumps operation, oil level maintenance, vibration check. Maintenance seal check, Cavitations, Suction &
Discharge pressure checkup, pulsation chamber, Strainer operation coupling. Shaft vibration & Heat checkup, speed setting, chemical dose pump operation, submersible pump operation, trouble shooting, etc.
Safety Devices:
H2S Safety, Fire safety, using crow can gas tester (CH4, H2S), fire Extinguisher (Foam, DCP & CO2) using in fire classification, fusible plug operation, deluge valve operation, fire-water pump operation. Breathing Apparatus, Safety Jacket, and Gas detector. Smoke detector, heat detector operation, H2S deduction, fixed monitoring system, electronic monitors,
EducationalTechnical Qualification & certification;
Academic : Secondary School Leaving Certificate.
Technical : Diploma in Chemical Technology
Awarded by State Board of Technical Education, Tamil Nadu,
PanimalarPolytechnic, Chennai, India
Percentage of Marks – 66%, April 2000
Additional Information;
- Basic First Aid Training Conducted by Kuwait Red Crescent Society.
- Basic Fire Fighting Training Conducted by Kuwait Red Crescent Society.
- Trained by Joint Operation Standard HSC policy; H2S; Fire watch; Confined Space.
- SCBA Training from Mahata Trading Company, Kuwait.
Personal Detail;
Father Name : M.Vitoba
Date of birth & Age : 01/11/1978 /32 years
Marital Status : Married
Nationality : Indian
Languages Known : English, Hindi, Telugu, Tamil and Malayalam
Passport No &Place of Issue : J 2465299/ Chennai (expired on 21/10/2020)
Permanent Address :18/25, Indra Gandhi street,
Arumbakkam, Chennai- India-600106
Present Address : Rajasthan –Barmer
Present Contact : 0091-8890023955/0091-9043175646
E-mail :
DECLARATION
I hereby declare that all statements made in the application are true, complete & Correct to the best of my knowledge and belief.
Yours truly
Place : Rajasthan
Date : (Vitoba parthasarathy)