Form completed by
Customer
Project / offer / order no. Pos.:
Date
1. Size of installation
x = trolleys
2. Smoke trolleys
Type ☐ floor travelling trolley
☐ hanging trolley
Dimensions x x mm (length x width x height)
Height of rail mm
Diameter of roller mm
Load capacity kg per trolley
Use of fork lifts inside the Chamber ☐
Gauge mm
3. Delivery quantity pieces
4. Processes ☐ cooking (Aeromat, Cooking Installation)
☐ drying (Aeromat)
☐ hot smoking (Aeromat)
☐ baking up to 160°C (Aeromat)
☐ showering (Aeromat, Cooking Installation, Intensive Cooling Installation)
☐ cold air cooling (Intensive Cooling Installation)
☐ ice water showering (Intensive Cooling Installation)
5. Product(s) Please complete the form
product name / ingredients / caliber / size / length / casing1.
2.
3.
4.
☐ hanging product
☐ lying product
☐ tower
Previous process in the factory
Following process in the factory
6. Specification of equipment
☐ new investment
☐ replacement of existing equipment
Description of existing equipment
Specification of new equipment
Machine unit ☐ on top ☐ at rear wall
Heating ☐ steam (6 bar) ☐ steam (4 bar)
(only to complete with AEROMAT) ☐ direct gas ☐ liquid gas
☐ electricity ☐ natural gas
☐ thermo oil caloric value kwh/m³
Type Temperature °C
Humidification ☐ steam (0,7 bar)
(only to complete with AEROMAT and Cooking Installation or Cooling Installation with steam valve)
(only to complete with AEROMAT) ☐ water (rel. humidity max. 80 %, not applicable for cooking processes)
☐ steam generator VEMAG (DE48, DE96, DE 120, max. 5 trolleys, long cooking times)
Cooling system ☐ Freon
(only to complete with Intensive ☐ Ammonia
Cooling Installation or Aeromat ☐ Ethylene-Glycol concentration %
with cold smoke device, see ☐ Propylene-Glycol concentration %
Accessories) Temperature of cooling media °C (Intensive Cooling Installations – 10°C)
Cleaning of machine unit Cooking Installations as well as Intensive Cooling Installations are delivered without cleaning of machine unit in their basic version.
☐ semi-automatic foam cleaning (standard in AEROMAT)
☐ full automatic foam cleaning
☐ Chamber cleaning
☐ cleaning of the machine unit with steam
Position of cleaning distribution ☐ left ☐ front
☐ right ☐ back side
Cold water supply bar °C
Compressed air 6 - 10 bar instrument air, with lifting doors 8 - 10 bar.
Door ☐ single wing for single-row design
☐ double wing for two-row design
☐ pneumatic door opening
☐ transit
☐ lifting door
☐ roller door
(only available with Intensive Cooling Installation without steam cooking)
☐ window
Entry /exit ☐ entry bridge
☐ short metal entry ramp (floor - 33 mm)
☐ long metal entry ramp (directly on the floor)
Chamber floor with Pagel cement ☐ (Hygiene reasons)
Door opening (single-row) ☐ left ☐ right
Door opening exit (single-row) ☐ left ☐ right
(only to complete with Transit)
Voltage V, 3 Phase Frequence Hz
7. Accessories
☐ shower in the Aeromat
(standard in Cooking and Intensive Cooling Installations)
☐ floor drain (DN 100) for showering
☐ vertical outlet
☐ horizontal outlet
☐ siphon
(not available in combination with automatic chamber cleaning)
☐ drain flap
(not available in combination with automatic chamber cleaning)
☐ automatic door opener (for water outlet during showering process if no floor drain is installed)
☐ exhaust air pipe (length 6 m)
other length m
☐ smoke trolleys quantity
☐ smoke sticks quantity
Accessories (only available with AEROMAT)
☐ Smoke Generator H 508 up to max. 6-trolley installations
☐ Smoke Generator H 508 with voltage transformer (voltage >400V or voltage < 400V)
☐ Smoke Generator H 504 up to max. 12 trolley installations
☐ Smoke Generator H 504 with voltage transformer (voltage >400V or voltage < 400V)
☐ Friction Smoke Generator H 501 up to max. 4 trolley installations
☐ Steam Smoke Generator H 507 up to max. 6 trolley installations
☐ TARBER Liquid Smoke System
Position of Smoke Generator
☐ smoke pipes
☐ recycling pipe (for H501) length m
☐ electric heater for temperatures max. 160°C
☐ cold smoke device
☐ Exhaust Air Cleaning System / Afterburner Installation TNV
8. Switch Board / MICROMAT C7
Size ☐ 8 ̎ display (standard) ☐ 10 ̎ display
Indication in ☐ °C ☐ °F
Position of control display ☐ left ☐ front
☐ right ☐ back side
☐ on the door ☐ other position
please define
Position of control cabinet ☐ left ☐ front
☐ right ☐ back side
☐ on the door ☐ other position
please define
Length of sensor cable m (20 m included in delivery)
☐ water protection cap
☐ RFID Log-in
☐ chamber lightning (standard in Germany => 5 trolleys depth)
☐ barcode scanner
☐ Ethernet interface
☐ LDS Quantity of Installations to be connected to LDS
☐ LDS already existing, no. of existing LDS
☐ electric material
☐ only cables
☐ cable grate
☐ cableways
length of electric material m
9. Assembly & start-up
Chief assembly ☐ Technical start-up VEMAG ☐
Assembly VEMAG ☐ Technological start-up VEMAG ☐
Electrical installation VEMAG ☐
10. Customer’s plant
Handling most narrow way length x width x height
lift length x width x height
max. transport weight kg
11. Schedule
Order week/year
Delivery week/year
Start-up week/year
12. Miscellaneous
Decision criteria
Additional information
Date, customer’s signature Date, VEMAG representative
5