DUFF, ABASIMODO NTIEDO

PLOT 8.ALHAJI ANIMASHAU CLOSE, OFF ADELABU ROAD, SURULERE, LAGOS, NIGERIA.

Male, Single, Nigerian, Date of Birth: 30/09/1989

(+234)7086237906

PROFESSIONAL PROFILE

I am a multi-skilled Electrical/Instrumentation engineering professionalwith good experience in industrial automation engineering, process control, process instrumentation, EPCC E&I project pre-commissioning/commissioning, manufacturing and FMCG. I have gained over three years of cumulative technical experience in automated processing facilities both in Oil&Gas and manufacturing. I have also been trained and certified in Industrial Engineering with technical modules covering several areas of Automation, Electrical and Instrumentation engineering including PLCs and SCADA/HMI development and operations, AC drives, electro-pneumatic controls, process control, calibration and electrical troubleshooting. I am passionate about a dynamic and challenging career in engineering where my technical and professional skills will be useful in enhancing productivity and proffering solutions to daily industrial issues with sufficient exposure for a progressive professional growth.

I am passionate, ambitious, adventurous and highly adaptive.

PROFESSIONAL INTERESTS

I&C Engineering projects, World Class Manufacturing Technology, Smart-Plant operations/management, Industrial Electrical/Automation Engineering, Petrochemicals, Gas Turbines and Power Generation

SKILLS/COMPETENCIES

Excellent risk assessment skills, high level of safety consciousness and attentiveness to SOPs

Practical understanding of industrial automation

Practical knowledge of electro-pneumatic production/manufacturing systems.

Excellent understanding of relays, contactors, sensors and transmitters and DCVs

Ability to understand and interpret electrical schematics, PFDs, P&IDs, termination diagrams, loop diagrams and cable schedules

Expertwiring/termination and cable management skills

Good knowledge of PLCs (SIEMENS S7 AND AB, RSlogix500) with ladder logic

Good knowledge of SCADA/HMI development (Factory talk View)

Good knowledge of safety/process Instrumentation

Installation and parameterization of AC Drives (SIEMENS MM 420)

Familiar with use of HART COMMUNICATOR 475.

Ability to troubleshoot electrical circuits and control loops

Ability to co-ordinate loop checks and troubleshoot instrument loops

Ability to design, install, troubleshoot and maintain Motor control circuits

Good understanding of HVAC and refrigeration systems

Proficient with the use of Microsoft office packages, excellent computer skills.

Excellent communication and writing skills

EDUCATIONAL BACKGROUND

2006 – 2011 / B.ENG. HONS. (ELECTRICAL/ELECTRONIC ENGINEERING)
MADONNA UNIVERSITY
(Instrumentation and Control Option)

PROFESSIONAL TRAINING/ CERTIFICATIONS

  • CERTIFICATE IN INSTRUMENTATION/AUTOMATION ENGINEERING (CAE),

JUNE 2015

INSTITUTION: APPLIED ENGINEERING TECHNOLOGY INITIATIVE, SURULERE, LAGOS.

AREAS COVERED:

Programmable Logic Controller Basics (Siemens S7 and Allen Bradley RSlogix 500), Instrumentation and P&ID, Calibration and maintenance of process instrument using HART 475 and Fluke 789, SCADA/HMI (Wonderware & Factory Talk View, Pneumatics/Electro-Pneumatic Instrumentation, AC Frequency drives (Siemens Micro Master420) installations, wiring, parameterization and operation, Technical Report Writing, Industrial HSE

  • BASIC ELECTRICAL TROUBLESHOOTING COURSE

SIMUTEC INT.

(APPLIED ENGINEERING TECHNOLOGY INITIATIVE)

(MAY 2015)

Basic electrical safety,Troubleshooting and maintenance of Electric motors,Electrical troubleshooting and repairs using schematic diagrams, Lock out/tag out, Fault detection/ correction, Component rating, tolerance, redundancy and safety critical equipment.

WORK EXPERIENCE

THE CANDEL COMPANY LTD
(AUGUST 2015TILL DATE) / ELECTRICAL ENGINEER /
  • Actively assist in the implementation of TPM on production facilities
  • Carrying out routine maintenance on production lines,
  • Team Lead for maintenance of process control instruments including pneumatic systems, temperature and pressure transmitters, flow control valves, shutdown valves, gauges and others sensors and transducers.
  • Team member for Plant Risk Assessment/ development of SOPs for all production machines and electrical facilities.
  • Responding to line calls for faults and electrical troubleshooting
  • Optimize the performance of production systems, electrical installation and instruments to minimize failures.
  • Troubleshoot electrical circuits, motor circuits, control circuits, fault finding and enhancment of systems up-time to enhance productivity.

ALCON NIGERIA LIMITED
(DECEMBER 2011- JANUARY 2013)
UKWO FIELD DEVELOPMENT PROJECT; CONSTRUCTION / COMMISSIONING OF UKWO GAS PLANT, EKET
CLIENT: SEPTA ENERGY/FRONTIER OIL LIMITED / INSTRUMENT
PRE-COMMISSIONING TECHNICIAN /
  • Installing process control instrument: pressure, level, temperature, flow and analyzer transmitters on flow lines as specified on P&ID
  • Wiring, glanding/cable termination on all process/safety instruments; transmitters, smoke, gas/flame detectors, control/shutdown/blow down valves, alarm systems, relay panels, junction boxes and control panels
  • Management of cables as specified on cable schedules, trenching, tagging, and arrangement on trays.
  • Pre-commissioning checks, preparing test sheets for documentation
  • Insulation resistance tests on instrument cables
  • Clearing of Instrument punch lists
  • Performing Continuity checks on Instrument cables
  • Carrying out stroke test on flow valves, shutdown valves and control valves
  • Team Lead for cold loop checks on all instrument loops
  • Assisting in Hot loop checks and loop current simulation with current calibrator and HART COMMUNICATOR 475
  • Performing calibration checks on control valves, pressure and temperature transmitters
  • Assisting in commissioning and plant start-up support
  • Documentation of instrument check sheets, red line diagrams anddatabase

LADOX ENG. COMPANY LIMITED
(JUNE 2009 – MARCH 2010)
CLIENT:
SPDC, SHELL IA, PORTHACOURT / TRAINEE
(STUDENTS INDUSTRIAL WORK EXPERIENCE SCHEME) /
  • Routine cleaning of air vents
  • Fault finding and maintenance of electric motors on water chillers circulation pumps and motor control circuits
  • Undertaking HVAC instrumentation checks
  • Carrying out routine steam cleaning of Air handling units
  • Documentation, routine checks and condition monitoring.

PROJECTS/ KEY ACHIEVEMENTS.

CANDEL FZE (SEPTERBER 2015)

  • Design, construction and implementation of an automated electro-pneumatic induction seal guard system for production Lines 1 and 2. To prevent burning of bottles under the induction seal. (a quality assurance project) (September 2015)
  • Team Member, Product mixing tank level automation project.(November 2015)

ALCON NIG LTD (JANUARY 2013)

Team-lead for pre-commissioning/cold loop checks, termination corrections, documentation of red line diagrams and other pre-commissioning activities which were crucial for the successful commissioning of Ukwo gas plant for FRONTIER OIL LTD/ SEPTA ENERGY. (January 2013).

HOBBIES

Creative writing, reading African literature and technology journals, swimming and playing football

REFERENCES

Mr. Innocent Odiakose
Head of Technical Training.
AETi Ltd.
08082864557
08097022193 / Engr. Dave Igweze, MNSE, MCPN.
Metering Engineer.
FRONTIER OIL LTD.

07032222942 / Mr. Edwin Oshie, Snr. Instrument Supervisor
ALCON NIG. LTD
08065577982