Contract 01011 – Contact, Ordering and Pricing Information

Effective 11/8/13

Contract 01011, Cutting Edges – Snow Plows & Graders

Category 1 - Cutting edges for truck mounted snowplows

Chemung Supply Corporation (page 2)

Category 2 - Grader Cutting Edges

Rebuilding & Hardfacing, Inc. (page 4)

  • CATEGORY 3 - Rubber Blades – Was rescinded by the vendor on 5/23/13 and are no longer available.

Category 1 Awarded Vendor

Cutting edges for truck mounted snowplows

Contractor: / Chemung Supply Corporation
Contact: / Marc Stemerman
Phone: / 607-733-5506
Fax: / 607-732-5379
Email: /
Federal ID No.: / 16-0380890
Mailing Address: / P.O. Box
Elmira, NY 14902
Order Placement, & Payment Address: / P.O. Box
Elmira, NY 14902
Ordering procedures: / Contact Marc Stemerman at 360-733-5506 or via email at
Credit card acceptance: / YES
Delivery time: / 30 Days
Payment terms: / Net 30
Freight: / F.O.B. Destination Freight Pre-paid & Included
Other: / Sales Tax is not included

Category 1 – Cutting Edges for Truck Mounted Snowplows

Pricing listed is FOB Destination, Freight Prepaid & Included and Does Not Include Sales Tax

Item / Description / Price
1. Standard Snowplow Cutting Edges:To be constructed from a high carbon alloy steel (AISI 1084 – C1090) and have a hardness rate greater than 25/35 on the Rockwell Hardness “C” Scale. State AISI rating of steel bid. Shall be supplied in lengths of 3 feet through 8 feet and bid at a cost per foot. Cutting edges shall be supplied in the following sizes:
a) / ½ inch thick x 6 inches wide / $8.62
b) / ½ inch thick x 8 inches wide / $9.19
c) / ¾ inch thick x 6 inches wide / $9.19
d) / ¾ inch thick x 8 inches wide / $9.19
2. Special Through Hardened Snowplow Cutting Edges:To be constructed of high carbon alloy steel (AISI 1084 – 1090) and have a hardness rating of 45/52 on the Rockwell hardness “C” scale. State AISI rating of steel bid. Cutting edges shall be supplied in lengths of 3 feet through 14 feet and bid at a cost per foot.Cutting edges shall be supplied in the following sizes:
a) / 5/8 inch thick x 6 inches wide / $12.62
b) / 5/8 inch thick x 8 inches wide / $12.62
c) / ¾ inch thick x 6 inches wide / $15.16
d) / ¾ inch thick x 8 inches wide / $15.16
3. Cutting Edges with Carbide Insert:To be constructed of A-36 steel with carbide insert rated at 87/ 89 hardness on the Rockwell Hardness “A” scale. Inserts shall be constructed of tungsten carbide in a trapezoid shape and brazed into a milled groove in the center of the wearing edge the full length of the cutting edge. Cutting Edges to be supplied in 2, 3 and 4 feet lengths. The approximate dimension of the carbide inserts to be .75 inch in height, .35 inch in width and 1 inch in length. State dimensions bid:
Height:______.75”______Width:_____.3.5”______Length:______1”______
a) / ¾ inch thick x 6 inches wide / $58.25
b) / 7/8 inch thick x 5 inches wide / $59.10

Category 2 Awarded Vendor

Grader Cutting Edges

Contractor: / Rebuilding & Hardfacing, Inc.
Contact: / John K. Marx
Phone: / 509-684-4879
Fax: / 509-684-4870
Email: /
Federal ID No.: / 91-1017275
Mailing Address: / 1390 N. Main
Colville, WA 99114
Order Placement, & Payment Address: / 1390 N. Main
Colville, WA 99114
Ordering procedures: / Contact John K. Marx at 509-684-4879 or via email at
Credit card acceptance: / NO
Delivery time: / 30 Days
Payment terms: / Net 30
Freight: / $132.00 on orders less than 44,000 lbs.
F.O.B. Destination Freight Pre-paid & Included on orders of 44,000 lbs.
Other: / Sales Tax is not included

Category 2 – Grader Cutting Edges

Pricing listed is FOB Destination, Freight Prepaid & Included and Does Not Include Sales Tax

Item / Description / Price
1. Standard Grader Cutting Edges : To be constructed from a high carbon alloy (AISI 1084 – 1090) steel and have a hardness equal to or rate greater than 25/35 on the Rockwell Hardness “C” Scale. To be supplied in length of 3 feet through 8 feet and bid at a cost per foot. Cutting edges shall be supplied in the following sizes:
A. Double Bevel Flat Cutting Edges
a) / ½ inch thick c 6 inches wide / $11.90
b) / 5/8 inch thick x 6 inches wide / $14.91
c) / ¾ inch thick x 6 inches wide / $18.10
d) / ¾ inch thick x 8 inches wide / $21.73
B. Single Bevel Flat Cutting Edges
a) / 5/8 inch thick x 6 inches wide / $14.91
b) / ¾ inch thick x 6 inches wide / $18.10
c) / ¾ inch thick x 8 inches wide / $21.73
C. Double Bevel Curved Cutting Edges
a) / ½ inch thick x 6 inches wide / $6.97
b) / ½ inch thick x 8 inches wide / $9.98
c) / 5/8 inch thick x 6 inches / $8.75
d) / 5/8 inch thick x 8 inches wide / $12.33
e) / ¾ inch thick x 8 inches wide / $14.84
D. Serrated Cutting Edges: Provide serrated cutting edges with a serration of 4.5 inches, 1-inch tooth width, 1.4 inches between the teeth and a 30-degree tooth angle for edges with angle teeth. Edges supplied in the following dimensions:
a) / ¾ inch thick x 8 inches wide left angle teeth / $19.93
b) / ¾ inch thick x 8 inches wide right angle teeth / $19.93
2. Special Through Hardened Grader Cutting Edges:To be constructed from a high carbon alloy (AISI 1084 – 1090) steel and have a hardness equal to or rate greater than 45/52 on the Rockwell Hardness “C” Scale. To be supplied in length of 3 feet through 8 feet and bid at a cost per foot. Cutting edges shall be supplied in the following sizes:
A. Double Bevel Flat Cutting Edges
a) / 5/8 inch thick x 6 inches wide / $15.22
b) / ¾ inch thick x 6 inches wide / $19.68
c) / ¾ inch thick x 8 inches wide / $21.04
Item / Description / Price
B. Single Bevel Flat Cutting Edges
a) / 5/8 inch thick x 6 inches wide / $15.22
b) / ¾ inch thick x 6 inches wide / $19.68
c) / ¾ inch thick x 8 inches wide / $21.04
C. Double Bevel Curved Cutting Edges
a) / ½ inch thick x 6 inches wide / $8.57
b) / ½ inch thick x 8 inches wide / $10.84
c) / 5/8 inch thick x 6 inches wide / $10.08
d) / 5/8 inch thick x 8 inches wide / $14.03
e) / ¾ inch thick x 8 inches wide / $17.06
D. Serrated Cutting Edges:Provide serrated cutting edges with a serration of 4.5 inches, 1-inch tooth width, 1.4 inches between the teeth and a 30-degree tooth angle for edges with angle teeth. Edges supplied in the following dimensions:
a) / ¾ inch thick x 8 inches wide left angle teeth / $19.93
b) / ¾ inch thick x 8 inches wide right angle teeth / $19.93
E. Plow Bits
a) / 3ft KMT-TUCA-SX-36 / $621.15
b) / 4ft KMT-TUCA-SX-36 / $827.19
c) / 3ft GK-5 / $433.29
d) / 4ft GK-5 / $577.72
e) / LH TUCA Edge Guards / $154.53
f) / RH TUCA Edge Guards / $154.13
3. Kennametal I.C.E. (Isolated Carbide Edged) Blades:
a) / 7/8” x 5”x 36” / $262.63
b) / 7/8” x 5”x 48” / $350.18

1