1.6.2010

RANGE ROVER HISTORY IN DETAIL:

"The idea was to combine the comfort and on-road ability of a Rover saloon with the

off-road ability of a Land Rover. Nobody was doing it."

Charles Spencer 'Spen' King – the father of the Range Rover.

The inspiration came from the Rover car company's engineering chief for new vehicle projects. Charles Spencer 'Spen' King worked mostly on Rover cars, not on Land Rover (at the time, Rover's 4x4 wing). Yet Land Rover was in his blood. His uncles were the Wilks brothers – Spencer and Maurice – who jointly founded Land Rover in 1948.

"The idea was to combine the comfort and on-road ability of a Rover saloon with the off-road ability of a Land Rover," says King. "Nobody was doing it at the time. It seemed worth a try and Land Rover needed a new product."

The growing 4x4 leisure market

In the mid '60s, Rover engineers visited America to garner ideas on how to boost the company's sales in the US. Dealers there confirmed that a market for 4x4 leisure vehicles was growing. Appealing to those who liked towing, camping and led an outdoor life, but also wanted a vehicle with freeway and urban-driving potential.

There were a few big-capacity vehicles, all American. The Jeep Wagoneer, Ford Bronco and International Harvester Scout were spacious, easy-driving station wagons that had selectable four-wheel drive to give some off-road potential, and gutsy engines to give reasonable on-road performance. In Europe, there was no such car. Land Rover engineers evaluated these American vehicles. They offered an interesting mix of abilities. But, in reality, they were nothing like as capable as a Land Rover in the rough, or as relaxing and accomplished as a normal saloon on-road.

"The Range Rover turned out to be quite a different vehicle. The goal was to launch a 4x4 with similar comfort and on-road capability. At the same time, I really thought it must be possible to offer much greater comfort than a Land Rover without sacrificing the off-road ability," says King."Then the V8 engine came along [which Rover bought from General Motors]. It all came together and nobody stopped us from doing it. Our American importers also told us that the 4x4 leisure market was going to be big."

It took Land Rover another 17 years (until 1987) before the Range Rover was launched in North America, due to the initial success of the vehicle elsewhere in Europe."I don't think there was any real urgency to get into America.The US's unique new safety and emissions legislation were too expensive to engineer," he added.

The '100-inch station wagon'

Work on the first prototype Range Rover, then known as the '100-inch station wagon', began in 1966. "It was going to be a premium leisure vehicle, but not really a luxury vehicle," saysformer project engineer Geof Miller. "It was also intended to be technically adventurous. Spen was convinced the vehicle must have car-like coil springs front and rear for on-road ride comfort, and no other 4x4 offered them. It needed very long travel suspension for off-road suppleness." Other technical novelties would include an aluminium body (like the Land Rover), an all-aluminium engine and disc brakes all round. (See 'Technology'section for more information.)

At the time, Land Rovers were enjoying record popularity. Many within Land Rover doubted the need for such a vehicle, and questioned the demand. Among the doubters was Land Rover's chief engineer, Tom Barton, a key figure in the development of the first Land Rover and a former railway engineer. He steadfastly maintained that the best suspension system for an off-road vehicle was leaf springs, as used by nearly all 4x4s of the time (a few American large 4x4s had front coils). The fact that the driving force behind the new Range Rover was Rover's car division, not the Land Rover 4x4 division, further alienated Barton and some other Land Rover diehards.

'A Land Rover for the price of a Rover saloon'

Land Rover's sales people were also worried. "How can we sell a Land Rover for the price of a Rover 2000 saloon? That was their worry," says Geof Miller. "They weren't really sure exactly what the vehicle was, or who it would appeal to. That's always the challenge with a new type of car."

According to Spen King, target customers were 'senior officers in the army, head guys on building sites, well-off farmers, that sort of person'. It appealed to all those people – and many more. "To be frank, it appealed to all sorts of people who we hadn’t expected," adds Miller.

Only 10 prototypes were built before the first production vehicle came down the Solihull production line. Early prototypes carried 'Velar' badges, jointly from the Spanish 'velar' (to look after, to watch over) and the Italian 'velare' (to veil, to cover). The actual Range Rover name was coined by stylist Tony Poole, after other model names – among them Panther and Leopard – were rejected.

'Four vehicles in one'

The Range Rover was announced to the world's media on 17 June, 1970 (the press launch was in Cornwall, with the off-road testing in tin mines near St Agnes). The first Range Rover sales brochure spoke about 'the most versatile motor car in the world', and the 'interfusing of Rover car comfort with Land Rover strength and four-wheel drive mobility'.

"The Range Rover is really four vehicles in one," says managing director Phil Popham. "It's a seven-days-a-week luxury motor car; a leisure vehicle that will range far and wide on the highways and noways of the world; a high performance car for long distance travel; and a working cross-country vehicle."

The Range Rover could do all these things. No other car in the world could even get close to that blend of abilities.

At launch, the target audience had also been more carefully considered. The brochure said they were: 'Business and professional people with a leaning towards the great outdoors, who want a purpose-built vehicle instead of an adapted one, the real thing instead of a compromise'.

A car 'for all seasons'

The press kit called the car 'the Range Rover Station Wagon' (though the station wagon tag was soon dropped), and said it was 'equally at home on a ranch in Texas as on the fast lane of a motorway in Europe'. It was also called the car 'for all seasons', a catchy promotional tag that stuck.

Early marketing material highlighted the car's towing capacity – 'Harnessed to a trailer, caravan, boat or horse-box, the Range Rover is a tower of strength that takes all the normal stresses and strains, doubts and worries out of this kind of operation'. It emphasised the vehicle's highway capability, unique among 4x4s: 'On main roads and motorways, the Range Rover can cruise at speeds of up to 90mph'.

Much was made of its ability of 'roughing it in luxury': 'One has only to experience the thrill of driving straight off the road and across a rough field with no slackening of speed and little change in the car's ride characteristics to realise that the Range Rover is a very special kind of vehicle'.

Roger Crathorne, later head of the Land Rover Experience, was a Range Rover engineer during the first model's development. "I remember the first time I drove a prototype at the MIRA test track in England. It was brilliant. I remember doing 100mph on the track. I thought: 'This vehicle is extraordinary – comfortable, fast, a brilliant and spacious touring car'. Just as impressive was its off-road ability, which was much better than any contemporary Land Rover. The reason was axle articulation, on account of those coil springs. It had double the articulation of a normal Land Rover and, as a result, was more comfortable and more capable over rough terrain."

The world's first luxury 4x4

The Range Rover went on to be the world's first luxury all-terrain vehicle. But, although that first Range Rover had a luxury car ride and premium saloon performance, it certainly did not have the trimmings of a luxury car. That came quite a few years later.

The first Range Rover was a relatively spartan vehicle inside, with vinyl seat trim and vinyl and moulded rubber flooring to make it easy to hose out. There was no wood, or leather, or even carpet. "It certainly wasn’t a luxury vehicle, at least not initially," says Spen King. "In many ways, it was quite basic."

Adds Geof Miller: "The 'basic' interior was a sop to the Land Rover people (as opposed to the Rover car engineers) who wanted a simple hose-out interior. Sales were excellent. There was a black market almost straight away, as demand exceeded supply. Yet we knew that the interior was too basic. There were moves, almost immediately, to up-spec the vehicle, including improved trim. Carpet came quite quickly. It started on the transmission tunnel, where it also had the happy effect of quietening transmission whine. The boot area – which had been bare metal on prototypes – was soon trimmed, including a cover for the tool kit. This was partly because of feedback from Buckingham Palace. The tools were exposed in the boot and a man from the palace said a corgi could get hurt."

Two doors only

The original Range Rover had two doors only, and there was no automatic transmission option – although one of the early Land Rover-based prototypes had a Borg Warner three-speed automatic shift. Geof Miller stayed on the Range Rover project after its launch, and soon identified a four-door body as essential. Eighteen months after launch, a four-door prototype – with hatchback rear end – was built. Management however mothballed the car. A production four-door wasn't launched until 1981. Automatic transmission didn't become an option until 1982. Both were essential to any US success, where sales began in 1987.

The Classic lasts for 25 years

That first Range Rover was so far ahead of its time that it lasted in production, and sold well, for more than 25 years. Initially, in the '70s, the vehicle changed little. It was a bleak decade for the UK motor industry, with the three-day week and general political unrest. There was precious little development cash, and, besides, the Range Rover was selling well. Why change it? Cash-strapped British Leyland, Land Rover's then owners, spent development money elsewhere.

By the '80s, the pace of development picked up, mostly to make the vehicle more luxurious. Cabin trim was regularly upgraded, and carpet, leather upholstery and wood trim elevated the Range Rover into a viable alternative to luxury saloon cars – the first 4x4 to do so.

The 3.5-litre aluminium V8 was enlarged to 3.9 litres in 1989, and then to 4.2 litres in 1992, improving performance and refinement. The three-speed Chrysler automatic gearbox – first available in 1982 – was replaced by a smoother and more efficient ZF four-speed in 1985, further broadening appeal.

A long wheelbase version, the LSE, featuring height adjustable electronic suspension came out in 1992, a few years before the launch of the next Range Rover. The electronic suspension was also optional on the normal 100-inch wheelbase model.

Second-generation Range Rover, the P38a

The next generation Range Rover, now often known as the 'P38a' (because it was developed in building 38A in the Solihull factory), dialled up luxury, on-road ability and off-road versatility. It was an evolutionary design, 'retaining many of the key design features of the classic model', according to the press kit. Burr walnut and leather upholstery were used extensively, to underscore the car's luxury credentials, and its desire to win over owners of conventional luxury cars.

Three engines were offered, including a BMW 2.5 six-cylinder turbodiesel – which offered considerably better performance than the old Classic diesel – and both 3.9 and 4.6 versions of the aluminium Rover V8. The 4.6 gave a top speed of 125mph and 0-60 acceleration in 9.3 seconds, the fastest production Range Rover to date.

The height adjustable suspension, which made its debut at the twilight of the Classic's life, was further developed for the P38a and was offered as standard, improving both ride comfort and off-road potential.

Third-generation Range Rover, the L322

The latest Range Rover represented a big jump. Launched in 2001, it scaled new heights in the 4x4 sector in both luxury and on- and off-road capability. CEO Bob Dover called it, 'the world's most capable vehicle, with the greatest breadth of ability of any car ever made'.

Among the new features were the stiffer monocoque body (replacing the traditional 4x4 ladder frame) and the fully independent suspension with interconnected air springs (nearly all 4x4s had, and many still have, rigid axles). The interior was also widely lauded as the finest of any car cabin.

At the car's launch, the head of Ford's Premier Automotive Group (of which Land Rover formed part), Dr Wolfgang Reitzle, said: "The new Range Rover is truly extraordinary. Its unique combination of go-anywhere skill and luxury means its closest rivals aren't other 4x4s but the finest luxury saloons in the world."

DESIGN:

'It’s not difficult to see why it was so successful. Like the current version, the original Range Rover is such a simple and iconic shape'

The shape of a Range Rover is instantly recognisable. "You can describe a Range Rover with three or four lines on a piece of paper," says former design director Geoff Upex, responsible for the current model. "A child could draw the basic shape, so it's instantly recognisable in the same way as a Mini or a Porsche 911 or a Volkswagen Beetle.

"There are four or five elements that make up a Range Rover design: the simplicity of the side elevation, the relationship of the glass to the body, the floating roof and the castellated bonnet. The same is true of the inside of the car. It was designed so that people sit as far out as possible and have the best view. They can see out down the bonnet and see all corners of the vehicle. So it's about command driving. It's also a very nice place to be. I have driven many different vehicles. Nothing quite gives that same sense of well-being as being inside a Range Rover."

Current design director Gerry McGovern adds: "It's not difficult to see why it was so successful. Like the current version, the original Range Rover is such a simple and iconic shape."

Those iconic details are all there for a reason, for the Range Rover is a highly functional vehicle. The bonnet castellations improve the driver's ability to see the corners of the car. They're helpful in congested city driving, in parking, and when driving off-road. The 'floating' roof is partly an upshot of those comparatively thin pillars, to improve visibility.

On the very early production Range Rovers, the roof pillars were body coloured. It was not possible to manufacture these pressings with a suitable quality finish, so the pillars were soon covered in a black 'pseudo-hide' finish. The hide boosted the 'floating roof' effect.

The comparatively flat sides, and lack of 'tumblehome' curvature, allow driver and passenger to sit as far out as possible, improving visibility. Those relatively flat sides also improve the driver's ability to judge vehicle width, important for manoeuvrability on- and off-road.

Even though it's become a design classic – a model was displayed inside the Louvre in Paris, while an actual vehicle was simultaneously shown just outside – Spen King claims that 'we probably only spent about 0.001 per cent of our time on the appearance'. Like many design greats, form followed function. The superb functionality led to a simple style and a simple shape.

The concept and basic shape – flat sides, thin roof pillars, short overhangs, all dimensions including wheelbase, upright nose and tail – was determined by engineers, principally King and chassis engineer Gordon Bashford. The initial press kit didn't even talk about 'design'.

The design, for King's concept, came from David Bache, Rover's design boss. Bache's design CV is impressive – Rover SD1, Rover P5 and P6, Series II Land Rover. But the Range Rover Classic was his finest hour.

He tidied up the King/Bashford proposal, adding his design ideas to the inherent functionality. In particular, he changed the grille and headlamps, and the taillamps. He also altered the window surrounds and side swage lines. They were not major details, but they made a huge difference to the car's presence and aesthetic appeal.