CLOSED CIRCUIT TV FINAL FOCUS AGREEMENT
PDI Representative: / Date:GC Representative: / Project:
Owner Representative: / Project #:
Instructions:
1. Hold a Final Focus Meeting consisting of PDI, GC and Owner to perform final adjustments and system turn over
2. Review items below and have owner representative initial each item acknowledging understanding and acceptance of final adjustments, training & documentation
3. Owner should initial each item, and sign/date the bottom as acceptance of responsibility for the system going forward
4. Submit a copy of this completed form to and CC meeting attendees for record
TRAININGDate of Training:
DVR Setup and Training / Acknowledgement of Understanding / N/A / Initials
1. DVR has been assigned an IP address, and configured to a network for remote access to the DVR
2. Camera operational times have been set
3. The image storage and retention duration has been set
4. The person assigned for the responsibility of the system has been introduced to the monitoring, recording, and playback functions of the DVR’s operation
FINAL ADJUSTMENTS & TURNOVER
Date of Final Focus Meeting:
Camera mounting and focusing / Approved / N/A / Initials
1. Cameras are mounted in the correct locations
2. Camera field of view is satisfactory
3. Camera image quality is satisfactory
DVR Physical Installation / Approved / N/A / Initials
1. DVR has been installed in secure location
2. DVR monitor has been installed in a secure location
Handover / Approved / N/A / Initials
1. System demonstration has been performed and all components are working to the Customer’s satisfaction
2. Manual and manufacturer’s warranty have been turned over
Notes:
By signing below you acknowledge that the items outlined above are acceptable and have been approved and that you are taking full responsibility of the system, relieving Power Design from any future refocusing or liability not covered under warranty.
Owner Representative’s Signature / Title / DateRev. 5/21/12 CLOSED CIRCUIT TV FINAL FOCUS AGREEMENT
Page 1 of 2