Page 1 of 2

Clements Chemicals

SAFETY DATA SHEET

POWERFUL PINK

Revision Date: 31 Jul. 08

Date of Printing: 26 Sep. 12

MSDS Revision: 01

1.   IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING

Product Name: Powerful Pink

Product NO: A798, A800, A801, B476

Supplier: William Clements (Chemicals) Ltd

The Old Transport Museum

Witham Street

BELFAST BT4 1HP

Telephone: (028) 9073 8395

HAZARDS IDENTIFICATION

Provided that this product is handled correctly, it is not classified as hazardous to humans.

COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient Name / Cas No / Contents (%) / Health (class) / Risk (R No.)
Alcohol Ethoxylate / 68439-46-3 / <5 / Xn / 22,41
Dipropylene Glycol Methyl Ether / 34590-94-8 / <5
Aminotrimethylenephosphonic Acid Potassium Salt / 27794-93-0 / <5.0 / Xi / R36/38,41
(1-Hydroxyethylidene)Bis-Phosphonic Acid Tetrasodium Salt / 3794-83-0 / <10.0 / Xi / R36/38,41
Hepta Sodium Salt Of Diethylene Triamine Penta (Methylene Phosphonic Acid) / 68155-78-2 / <5.0
Pentasodium Nitrilotris(Methylene-Phosphonate) / 2235-43-0 / <10 / Xi / R36/38,41

4.   FIRST AID MEASURES

Inhalation: Remove to fresh air. Keep warm and at rest. Obtain immediate medial attention.

Ingestion: Dilute ingested chemical with plenty of milk or water. Do not induce vomiting. Seek immediate medical attention.

Skin Contact: Remove all contaminated clothing. Rinse well with soap and water or shower. Do not replace any contaminated clothing.

Eye Contact: Immediately flush with water for at least 15 minutes. Obtain immediate medial attention.

5.   FIRE-FIGHTING MEASURES

Suitable Extinguishing Media: This product does not burn.

Special Fire-Fighting Procedures: Wear full protective clothing suitable for the fire.

Hazardous Decomposition Products: None

6.   ACCIDENTAL RELEASE MEASURES

Spill Cleanup Procedures: Absorb large spillages onto sand or any absorbent material and dispose of in accordance with Local Authority Regulations. Small spillages may be rinsed away with large quantities of water. Prevent from entering sewers, drains, watercourses or permeable ground.

7.   HANDLING AND STORAGE

Usage Precautions: Avoid contact with skin and eyes.

Storage Precautions: Store in a cool, dry, well ventilated area. Keep away from heat sparks and open flame. Keep in closed containers.

8.   EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure limits:

2-Butoxyethanol: Long term OES (8hrs): 25ppm (sk)

Short term OES (15mins): 50ppm (sk)

Protective measures:

Respirators: Adequate ventilation.

Protective Gloves: Impervious, PVC, or rubber gloves

Eye Protection: Goggles or face shield

Other Protection: Footwear and apron if large splashes are likely

9.   PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Bright Pink mobile liquid

10. STABILITY AND REACTIVITY

Stability: Stable under normal conditions.

Materials to Avoid: None.

Hazardous decomposition products: None.

11. TOXICOLOGICAL INFORMATION

Butyloxyethanol: LD50 oral rat: 1480.00mg/kg

Health Warnings: Prolonged or repeated skin contact may result in dryness and cracking. This may in turn make the skin more susceptible to attack by other chemicals.

Contact with the eyes may lead to irritation, permanent damage is unlikely.

Ingest of large doses may result in irritation of the mouth and upper digestive tract.

12. ECOLOGICAL INFORMATION

Not expected to cause significant environmental impact.

Acute Fish Toxicology: No data available

Environmental Hazards: No data available

13. DISPOSAL CONSIDERATIONS

Disposal Methods: Via an authorised waste disposal contractor to an approved waste disposal site, observing all local and national regulations

14. TRANSPORT INFORMATION

NOT REGULATED FOR TRANSPORT

15. REGULATORY INFORMATION

NOT CLASSIFIED AS HAZARDOUS

16. OTHER INFORMATION

Text of the R-phrases that are allocated to the ingredients listed in section 2 of this safety data sheet:

R22 Harmful if swallowed

R36/38 Irritating to eyes and skin.

R41 Risk of serious damage to eyes

The information given in this safety data sheet is based on knowledge available at the time of completion and is intended to describe the product only in terms of the health and safety requirements. It does not signify any warranty with regard to specific properties or specifications.