Resume
Larry M. McIntyre
Personal: 219 Otto Road
Vilonia, Arkansas 72173
501-743-2059(86 13520752726 in China)
Drivers License#: La. 6019052
Social Security#: 433-06-6821
Passport#: 403025894 Issued 3/31/04 New Orleans, La.
102 Room-4-14#Story
Long Xi Yuan Two Qi
Hui Long Guan, Chang Ping Dist.
Beijing, China 102208
Objective: Secure a position with a reputable company that will provide stability and job security.
Experience: OMS
Agency work as an ET on the Drillship Petrobras 10000 9/16 to 10/07/09
Agency work on a semi in Angola as chief electrician 6/09 to 6/31
Family business- Mother and father both passed away.
Mermaid Drilling 12/08 to 3/09
Working on tender assist barges as a chief electrician in Indonesia.
ADCTX 9/08 to 12/08
Working as a consulting electrical commissioning engineer on a production platform doing Ex inspections on new installations on a production platform.
Agency work with the following assignments; 1/06 to 9/08
Worked on land rigs, jack ups, and semi submersible rigs in India, Qatar, and Saudi Arabia. Responsible for maintaining all electrical equipment, carrying out PMS, and supervising local assistant electricians.
Worked on 5th Generation Jackup rigs as both chief electrician and ET, maintaining NOV Amphion control systems, and M&I electric VFD’s
Worked in shipyard in Singapore on new build jackups. Set up PMS system database for new rig as the company was a new startup and had no database. Also, developed spare parts lists and ordered inventory for all electrical equipment.
Did equipment inspections to verify correct installation also commissioning tests.
GlobalSantaFe. Houston, Tx.
1/05 to 1/06
Chief Electrician. Worked in West Africa on a Letourneau Jackup and in the Caspian Sea on a DP semi-submersible. Assigned to a new build semi in the Gulf of Mexico that was equipped with Cyber-base drilling and ABB VFD’s for drilling equipment and thrusters.
Oceaneering International Inc. Morgan City, Louisiana
R.O.V. and WASP Electronics Technician 5/01 to 1/05
3 Years as an R.O.V. Electronic Technician with fiber optic experience on numerous call out jobs with several work class vehicles including Magnums, Millenniums and Tritons. 8 months as a WASP Electronic Technician involved with the Type 3 WASP upgrade.
Global Marine Drilling Houston, Texas
Rig Electrician 7/99 to 11/00
As the only electrician on board a Jack Up drilling rig. I was responsible not only for the maintenance of installed equipment, but also for the layout and installation of any new equipment that was added. I also scheduled and carried out the PMS program for all electrical drilling and HVAC equipment.
Williamette Industries Lillie, Louisiana
Plant Electrician 5/99 to 7/99
Plant electrician working in the projects department installing and troubleshooting newly installed equipment.
Noble Drilling Houston, Texas
Rig Electrician 11/98 to 5/99
Chief electrician on board a Jack Up drilling rig. I was responsible for the maintenance and the repair of all rig electrical equipment as well as the installation of new equipment on a rig start-up in Veneszuala.
Transocean Drilling Houston, Texas
Rig Electrician 11/97 to 11/98
Chief electrician on board a Semi-submersible drilling rig that was converted from a tender unit into a drilling unit. I took part in the installation and testing of all drilling equipment including top drive systems, mud treatment systems, and pipe handling systems. I was also involved in the upgrading of the rig electrical power generation system to handle the additional demands of the drilling systems. I was an active member on a new construction team that installed and tested a drilling package on a “new build” drill ship. I assisted in the build up of the drilling modules in the shipyard and the installation of the modules on the ship.
R. & B. Falcon Drilling Houston, Texas
Rig Electrician 8/96 to 10/97
Chief electrician on board a Semi-submersible drilling rig that was up-graded by the installation of bigger generators and state-of-the-art PLC controlled drilling equipment. I assisted in the installation of new mooring equipment that allowed the rig to drill in deeper water depths and in more adverse sea conditions.
Global Marine Drilling Houston, Texas
Rig Electrician 9/91 to 8/96
Chief electrician on board a Jack Up drilling rig responsible for all electrical maintenance and repair. I designed an out-of-level system using photo cells to replace an out dated system. I also designed and installed a two speed boom modification for the Letourneau PCM-120 electric cranes on the rig.
Huthnance Offshore New Iberia, Louisiana
Rig Electrician 2/91 to 9/91
Chief electrician responsible for the maintenance and repair of all electrical equipment on board. I worked on three rigs that were refurbished in the shipyard and put back into service after an extended cold stack period.
U. S. Navy
Electronics Technician 1/78 to 12/89
Electronics Technician on board nuclear submarines. I was responsible for the preventative and corrective maintenance of the ships internal navigation systems and also the electronic warfare systems. As the Leading Petty Officer and later as the acting Division Chief Petty Officer, I was responsible for supervising 7 electronics technicians. I scheduled and coordinated the PMS system for the ships electronic systems. I was responsible for acting as a liaison between civilian contractors and technical representatives while in the shipyard during an upgrade period.
Education: Franklin Academy Winnsboro, Louisiana
High School Diploma 1975
Basic Electricity and Electronics (U.S.N.) Memphis, Tennessee
Completed 1978
Course included AC and DC theory, circuit analysis, schematic reading, and troubleshooting fundamentals.
Electronics Class ‘A’ School (U.S.N.) Memphis, Tennessee
Completed 1978
Course included basic receiver and transmitter theory and troubleshooting to the component level. Test equipment usage of all common test equipment was also taught.
BPS 12 Radar Combined Maintenance (U.S.N.) Charleston, S. C.
Completed 1982
Course included maintenance and operation of the BPS 12 radar. Troubleshooting to the component level was taught. The use of specialized radar test equipment such as echo box use was also covered.
WLQ-4 ESM System Combined Maintenance New London, Ct.
Completed 1986
Course included operation and maintenance of the WLQ-4 ESM system. UYK-20 computer maintenance was taught as well as the use of specialized test equipment such as spectrum analyzers, frequency generators, power meters and plotters.
Basic Refrigeration and Air Conditioning Beaumont, Texas
Completed 1992
Course included refrigeration system theory and troubleshooting and repair. Also I obtained a certification as a Universal technician for refrigerant recovery.
Ross Hill SCR Drive School Houston, Texas
Completed 1992
Course included SCR drive theory and troubleshooting and repair of Ross Hill SCR drives.
Eex Course
Completed in Singapore
Cat 3500B Electronic Engine School
Completed April 20 06 Tractors Singapore