Inscribe Download Instructions

Inscribe Download Instructions

Step 1: Go to the site

Step 2: Click Inscribe

Step 3 (Varies per User): Click Yes for the account control changes prompt box

Step 4: Terms of agreement prompt will open. Click yes.

Step 5: Check the box and click continue.

Step 6: A coding prompt box will appear like the one below. Do NOT stop it. Just allow it to remain open for now.

Step 7: Welcome to the Install Wizard. Click “Next”

Step 8: Installation Folder. Click “Browse”

Step 9: Creating and placing your Inscribe Files. Click the down arrow (circled in red)

Step 9a: Select you “C/” drive from the drop down menu. A screen like below will appear.

Step 10: Create a new folder by clicking the new folder icon (circled in red)

Step 10a: Label the new folder “Emdat_Inscribe”. Then click “Ok”

Step 11: A new Installation Folder window will appear and should look exactly like below:

Step 11a: If the folder name (circled in red above) matches, click “Next”

Step 12: Confirm installation by clicking “Next”

Step 13: Windows will begin installing (time of install varies per user). Do not press or do anything until the below window appears. Then click close.

Step 14: Emdat coding window will flash: ONLY click close if there is a green confirmation at the end of the window like below:

Step 15: An Emdat desktop icon will appear. Please make sure it is on your desktop. It will look like the below:

Step 16: Downloading the Training Files. Go to

Step 17: Click on Inscribe Training Files link

Step 18:

Step 19: Inscribe Training Setup Wizard window will appear. Click “Next”

Step 20: Install window will appear, click “Install”

Step 21: Windows will begin installing (time of install varies per user). If any prompts appear click “Yes”. Other than that, do NOT press or do anything until the below window appears. Then click “Finish”.