Chicago Printing Equipment, Inc

CHICAGO PRINTING EQUIPMENT, INC.
1067 N. OLD RAND ROAD * WAUCONDA, ILLINOIS * 60084
Toll Free: 888-689-8487 * Phone: 847-526-6440 * Fax: 847-526-6502
* e-mail:

ALL OF THE EQUIPMENT LISTED BELOW CAN BE INSPECTED ON OUR

FLOOR IN WAUCONDA, ILLINOIS

VARIABLE PAPER PROCESSORS & VARIABLE PRESSES & PACK TO PACK PRESSES
1984 Sanden Model 831 (3) Color Variable x 15 1/2" wide (Dahlgren), (3) 14” Print Inserts, Imprint Unit,
Punch Unit w/Line Hole Rings, Dual Cross Perf, Roll to Fold (Sanden Fordyce Style) 50” Unwind

1997 Didde MVP (3) Color Variable Press x 18” wide, (3) 11 ½” Print Inserts, (1) 23” Cross Perf
Roll to Sheet with Receding Stacker

(2) DOVERSTAR PACK TO PACK PRESSES

1987 Doverstar 501 Variable Pack Press, 8 ½”, 11” & 14” Print Inserts, Variable Imprint
Imprint w/7”, 8 ½”, 11” Inserts

1988 Doverstar 501 Variable Pack Press, 8 ½”, 11” & 14” Print Inserts, Variable Imprint
Imprint w/7”, 8 ½”, 11” Inserts

* These 2 Presses are being offered as a package only

(2) MINI OFCON PACK TO PACK PRESSES

1987 Mini-Ofcon Model 154 Variable Pack to Pack, (1) Color w/Conventional Dampening,
11" & 14" Inserts and all standard parts (no plate bender)
1989 Mini-Ofcon Model 154 Variable Pack to Pack, (1) Color w/Conventional Dampening,
11" & 17" Inserts and all standard parts

* These 2 Presses are being offered as a package only

22” PRESSES

1989 DIDDE 860 ML (6) Color 22" x 17 1/2" (Triflow) Dual Cross Perf, Console, Roll to Sheet
(DG High Speed Sheeter) with Receding Stacker

1981 DIDDE 860, (4) Color 22" x 17 1/2" (Quadflow) Dual Shaft Numbering, Dual Shaft Punch,
Dual Cross Perf, Console, Roll to Roll & Roll to Sheet w/Stacker

1981 DIDDE 860, (4) Color 22" x 17 1/2" (Quadflow)Console, Roll to Sheet

1978 DIDDE 175, (4) Color 22" x 17 1/2" (Dahlgren) Console, Roll to Sheet

1978 DIDDE 175, (6) Color 22" x 17 1/2" (Conventional) Console, Roll to Sheet

17" PRESSES

1988 DG 860 (3) Color 17” x 20 ½” (Triflow) MICR & Standard Numbering, Single Shaft Punch,
Dual Cross Perf, Roll to Sheet (High Speed Sheeter)

1990 DG 860 (4) Color 17” x 17 ½” (Triflow) Dual Shaft Numbering, Dual Shaft Punch, Dual Cross
Perf, Console Roll to Roll

1985 DG 860 (6) Color 17” x 17 ½” (Quadflow) Dual Shaft Punch, Dual Cross Perf, Console Roll to Sheet

1981 DG 860 (4) Color 17” x 17 ½” (Quadflow) Dual Shaft Numbering, Dual Shaft Punch, Dual
Dual Cross Perf, Console, Roll to Roll & Roll to Sheet w/Receding Stacker

1969 SCHRIBER 1000 (3) Color 17” x 20 ½” (Microflo) Dual Shaft Numbering, Dual Shaft Punch,
Line Hole Punch, Dual Cross Perf, Roll to Roll (40” Unwind & 40” Rewind)

1978 DIDDE MINICOM (4) Color 17" x 14" (Conventional) Cross Perf, Roll to Sheet

1978 DIDDE Conserver (2) Color 17” x 14” (Conventional) Roll to Sheet

1992 DIDDE Apollo (2) Color 17” x 14” (Conventional) Roll to Sheet w/Receding Stacker

1990 DIDDE Apollo (2) Color 17” x 14” (Conventional) Roll to Sheet

1974 DIDDE Tandemer (4) Color 17" x 14" (Conventional) Dual Shaft Numbering, 17” Cross Perf,
Roll to Roll & Roll to Sheet (Shear Knife)

11” PRESSES

DIDDE 175A (4) Color 11" x 17 1/2" (Dahlgren) Dual Shaft Numbering, Dual Shaft Punch,
Dual Cross Perf, Roll to Sheet & Roll to Fold

DIDDE 175A (4) Color 11" x 17 1/2" (Conventional) Dual Shaft Punch, Dual Cross Perf,
Roll to Sheet & Roll to Folder (Fordyce)

DIDDE 175A (4) Color 11" x 17 1/2" (Conventional) Dual Shaft Punch, Dual Cross Perf,
Roll to Sheet & Roll to Fold

14"PRESSES

1983 SANDEN 821 (5) Color 14" x 21” (Dahlgren) MICR & Standard Numbering, Dual Shaft Punch,
Line Hole Punch, Dual Cross Perf, R/R/F, (Fordyce Folder), 50” Unwind, 40” Rewind

1988 DIDDE 860 (3) Color 14" x 17 ½” (Triflow) Numbering & Imprint, Dual Shaft Punch, Dual
Cross Perf, Roll to Roll & Fold, 3,200 hours

1980 DIDDE 860 (4) Color 14" x 17 ½” (Quadflow) Dual Shaft Punch, Dual Cross Perf, Roll to Roll
& Roll to Fold (Bunch Folder)

1980 DIDDE 860 (4) Color 14" x 17 ½” (Quadflow) Numbering & Imprint, Dual Shaft Punch, Dual
Cross Perf, Roll to Roll

CONTINUOUS & SNAP COLLATORS

1988 HARRIS 625 (6) Station Continuous Collator, Air Print Glue, Crash Numbering w/Cams, Rings & Gears,
14”, 17” & 22” Up & Down Heads, Crimp Unit

1980 HAMILTON (6) Station Jumbo Snap & Continuous, 17” & 22” Up & Down, 17” & 22” Snap Heads,
Crash Numbering, Batcher Stacker

1988 HAMILTON 6 Station Continuous Mailer Collator, 22” Tamarack Chip Out, 22” Up & Down,
Tamarack Cross Web Gluer, Valco Glue System, Re-moist Glue

1981 HAMILTON 8 Station Continuous Collator, (2) 24” Up & Down Head, Valco Glue System

1979 WESTERN GEAR MARK II (10) Station Snap Collaror, 17”, 22” & 24” Snap Heads, Crash
Numbering, Air Press Glue System

1978 DIDDE WEBKLECT (8) Station Snap Collator, 14”, 17” & 22” Snap Heads, Crash Numbering,

Air Print Glue System

DIDDE ADD ON UNITS

DG 175B Rollstand x 17 ½”

DG 860 Control Infeed x 17 1/2 "Harmonic"

DG 860 Control Infeed x 20 ½” wide “Harmonic”
DG 175 Control Infeed "Cleveland Variator"

DG 175 Offset Tower 22” x 17 ½” (Conventional)

DG 175 Offset Tower 22” x 17 ½” (Dahlgren)

DG 175 Offset Tower 17" x 17 ½" (Dahlgren)

DG 175 Offset Tower 14" x 17 ½" (Dahlgren)
DG 175 Offset Tower 11" x 17 ½" (Dahlgren)
DG 175 Offset Tower 11" x 17 ½" (Conventional)
DG 860 ML Dual Shaft Numbering Unit 22" x 17 ½”

DG 860 MCM Single Shaft Punch Unit 22” x 20 ½”

DG 860 MCM Single Shaft Punch Unit 22” x 20 ½”
DG 175 Dual Shaft Punch 22" x 17 ½"
DG 860 Dual Shaft Punch 28" x 17 ½"

DG 860 Dual Shaft Punch 17" x 17 ½"

DG 175 Dual Shaft Punch 17" x 17 ½"

DG 860 Dual Cross Perf 24” x 17 ½”
DG 860 Dual Cross Perf 22" x 17 ½"

DG 860 Dual Cross Perf 17" x 17 ½"

DG 860 Dual Cross Perf 14" x 17 ½"

DG 860 High Speed Sheeter 22” x 17 ½”
DG 860 Sheeter 17" x 17 ½"

DG 860 Sheeter 14" x 17 ½" w/short delivery table
DG 175 Sheeter 11" x 17 ½"
DG Spacer Cabinets 3' x 17 ½"w/o Gear Boxes
DG Spacer Cabinets 3' x 17 ½"with Gear Boxes
DG Spacer Cabinets 1' x 20 ½"
DG ML 860 Variable Press Folder x 20 ½"wide (Fordyce Style)
In-line Fordyce Folder w/Base Cabinet

ELElectronic Web Guide
WTI Electronic Web Guide
FIFE Electronic Web Guide
Reliance 15 Hp. Motor & Panel

Reliance 40 Hp. Center Drive Motor, Panel & CD Cabinet

Reliance 30 Hp. Center Drive Motor, Panel & CD Cabinet

Allen Bradley 30 Hp. Center Drive Motor, Panel & CD Cabinet
Didde Platebender 22” x 17 ½”

Didde Turnbar x 20 ½” wide
Didde Turnbar x 17 ½” wide
Didde Turnbar x 14" wide
Didde Turnbar Mount
Baldwin Ink Agitators x 17 1/2" wide
Didde 22" x 20 1/2" Blanket Cylinder "New"

Didde 11” x 17 ½” Plate & Blanket Cylinder “New”
Didde Punch Rings, File Hole & Line Hole, 17", 22" & 28”

Didde Dual Row Line Hole Rings, 17” & 22”

3 Hp. Trimblower

MISCELLANEOUS EQUIPMENT & ACCESSORIES

Enkle 50” x 32 ½” Splicer

Martin EC 1020 Automatic Splicer w/Pneumatic Lift

Martin EC Automatic Splicer, 40” Rolls x 26 ½” wide

Atlantic Zeiser Codaprint Encoder, 3 Station w/1 MICR & 2 Arabic

1988 Nale (3) Station Hi-Flo Encoder, Model 21-HF, S.N. 0988-343

1985 Nale (3) Station Encoder, Model 21, 1 MICR & 2 Arabic

1993 Bunch Model 525 Rewinder, 1000 FPM, 24” x 20 ½”
1993 Rockwell/FME Variable Pack to Pack Imprinter w/17” Imprint Shell
Fordyce Press Mounted Folder x 18" wide, Rollup Delivery Table
1986 Bunch 700 Rollup Press Folder x 20 1/2" wide
1985 Form Flo Rollup Variable Press Folder
1986 Bunch Swing Away Variable Press Folder x 20 ½” wide
Tamarack Cross Web Gluer for Hamilton Collator
Tamarack Cross Web Plate Cylinders 7 1/3", 8", 10", 13", 14”
Hamilton Hi Line Up & Down Heads 17", 20”, 24, 26” & 28”

Schriber Batch Delivery

Schriber Anvil Cylinder w/Scraper Assembly
Schriber Snap Heads 14” to 25 ½”

Schriber Up & Down Heads 14” to 28”

Western Gear Mark Continuous Heads, 17", 22" & 24"

Western Gear Mark Snap Heads, 17", 22" & 24"
Western Gear Mark Collator Punch Units, 12"& 17"

Tamarack Chip Out Heads 22" & 24", Both units are slotted 4 and 6 around
22" unit can remove ¾” chips at 3 2/3", 5 1/2", 7 1/3" 11" and 22" repeats
24" unit can remove ¾” chips on 4", 6", 8", 12" and 24" repeats

Accumeter Glue System
Form Flo Carbon Trimmer
Form Flo Core Cutter

Challenge Model 370G Full Power Paper Cutter (missing small side table)

Challenge Model EH 3A 3 Hole Paper Drill (Gold)

O & M 20” x 29” Pile Feed Folder w/18” x 20” Right Angle Attachment

Baum 20” x 26” Pile Feed Folder, Series 420B (Blue)

CHICAGO PRINTING EQUIPMENT, INC.
1067 N. OLD RAND ROAD * WAUCONDA, ILLINOIS * 60084
Toll Free: 888-689-8487 * Phone: 847-526-6440 * Fax: 847-526-6502
* e-mail:

ALL OF THE EQUIPMENT LISTED CAN BE SEEN PICTURED ON OUR WEBSITE
AND IS BEING OFFERED SUBJECT TO PRIOR SALE

WARRANTY DISCLAIMER FOR USED EQUIPMENT

THE USED EQUIPMENT IS SOLD “AS IS WHERE IS”. WITH RESPECT TO ANY USED EQUIPMENT, SELLER MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, OF ANY KIND OR NATURE INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PRUPOSE

OUR 29th YEAR