Instruction:
Thank u for ordering this item, if the attached manual is not easy to understand, hope this may be helpful.
1.Turn on/off: long press the K1,blue and red light will both flash, in the meantime, item will get a vibration .Once vibration ended, blue light will off, red light stay on, means enter the standby mood. if u want to switch off the item, long press button ,then item vibrate and red light will flash three times quickly and will turn off.
2.Photograph function: under the standby mode, short press K2,blue light will on, and red light will off, it will start to take pictures and save file. Once completed it, item will vibrate one time, then blue light will off and ,red light will on, reenter the standby mood..
3.Camera function: under the standby mode, long press K2,item will vibrate twice, red light will flash three times then will off, and start to camera shooting, during this process, short press K1 or K3,red light will flash six times then off, which means item enter camera mood. When camera shooting, press K2,item will vibrate one time,it will stop camera shooting and save it.in the meantime ,red light on,means enter the standby mood.
4.Recoding:under the standby mode, short press K1,item will vibrate one time,red light off,blue light will flash three times then off, means item is recording. after that, short press button K1,item will vibrate one time,save the recording file,blue light off red light on,enter the standby mood.
5.Motion detecting videotape: under the standby mode, short press the button K3,the item will vibrate three times Continuous，then red and blue light will flash four time at the same time,after that,will both off,which means enter the motion detecting camera standby mode,,if u put something in front of it,the blue light will flash ,means item enter this mode
6,PC camera:while using the pc camera function,u should install Random matching of the driver. turn off the item,long press K2 until it connect the pc,enter the PC CAMERA .
7.Charging mode:connect item with USB cable or charging adapter,while item be charged,blue light will flash, once item be fully charged,blue light will off. as for the previous five times u use it,u should consume the power completely then recharge item fully.which will make good use of this battery.
8.Camera shooting while charging:while item be charged, long press the K3,waiting till item change to red light ,enter the standby mode,then u can take pics, camera, recoding, motion detecting.
9. Set the video recording time:The item provide the function of showing the video time in the video files,the format is:year-month-date hour:minute:second,method of setting time as below:
use the USB cable to connect the item with the computer, then will appear the "Removable hard disk"in my computer.open the tablet and notebook(*.txt) in the Windows software attachment,then input
[date]
2010/05/05
12:59:30
name the file: time.txt
save the file and put it into the removable hard disk,cut off the USB connection,open the item and record the video again,now at the video lower right-hand corner time is the revised time and date.
Also u can use the WriteTime.exe file stored in the item to update the time,method is to double-click the WriteTime.exe,will jump out of a update-window,then click the update to update the time.
10.Special situation happen:
if item did not get much power,light will flash about three seconds,then will save current process and turn off.if u still want to use it,u should charge this item.
if item did not handle correctly,it wont get any response. under this situation, u need to press K1 and K2 simultaneously ,reset the item.
If item can not switch on:u should check if there got much power left,press K1 and K2 simultaneously,turn off the power,reset the item.
If u fail to connect with the PC: would like u check ur operation system,Drivers,USB port,connected cable,to see if this in good condition,
The capacity of disk space is not much,check if ur TF card insert properly or if be damaged or not.