"Complex drilling works" trust of State Oil Company of Azerbaijan Republic (SOCAR)
announces an open procurement competition (№26003-17) in order to provide the requirement of Chemical reagents
I. / Documents to be submitted for participation in the competition:§ Application letter for participation in the competition (the letter is attached);
§ Bank document on payment of the participation fee;
§ Bid.
Application for participation in the competition (signed and sealed) and the bank document on payment for participation fee should be submitted in Azerbaijani, Russian or English languages no later than 17.03.2017, 5:30 p.m. by Baku time, to the address of the Purchasing organization specified in the notice.
The copies of the required documents (except the bid) may be sent to the e-mail address of the contact person specified in the notice. In this case, the originals of the documents shall be submitted to the Purchasing Organization until the last day of submission of the bids.
II. / The deadline for submission of the bids:
§ An original and two copies of the bid shall submitted to the Purchasing Organization before 27.03.2017, 10:30 a.m. by Baku time.
§ Late bids shall be rejected without opening.
III. / The acquisition of the aninvitation to bid and participation fee:
§ Those wishing to acquire an invitation to bid in Azerbaijani, English or Russian languages can obtain it from the contact person in electronic or print form after paying 500 Azerbaijani manat ( VAT included) or an equivalent amount in any other freely convertible currency to the below-mentioned account, till the date specified in the paragraph I of the notice, on any business day of the week from 09:30 a.m. to 05:30 p.m.
§ Account number:
International Bank of Azerbaijan OJSC,
AZ38IBAZ38010019449306332120,
TIN: 9900003871,
Customer Services Department,
Code: 805250,
Correspondent account: AZ03NABZ01350100000000002944,
TIN: 9900001881,
SWIFT BIK: İBAZAZ2Х
§ The participation fee is not refundable
IV. / The execution date of the Contract:
It is required to fulfill the conditions of the purchase contract within 60 (sixty) calendar day.
V. / The address of the Purchasing organization:
AZ1033 (index), N.Narimanov district, A. Nematulla strett, 105, Baku, Azerbaijan Republic
Contact person:
Huseynov Anar
Procurement and marketing department, Deputy Head
Phone: + 99 412 521-31-59
Fax: + 99 412 521-31-59
E-mail:
VI. / The notice , information about the subject of procurement and application form to obtain tan invitation to bid are placed at the internet site:
www.socar.az (http://www.socar.az/socar/az/company/procurement-supply-chain-management/procurement-notices)
VII. / Time, place and the opening date of bids:
Bids will be opened on 27.03.2017 at 11:30 a.m. by Baku timeat the address of the Purchasing Organization specified in paragraph V of the notice.
VIII. / An information about contracts awards:
An information about the final results of the competition can be obtained from the following web link:
http://www.socar.az/socar/az/company/procurement-supply-chain-management/contract-awards
The procurement group of the “Complex drilling works” trust, SOCAR
(In the firm blank of the applicant)
Application form for participation in open competition and for acquisition of ITB-Invitation to Bid (Set of Basic Conditions)
______city “__”______20__
______No.
Attn.: Fazil Ramazanov
Head of procurement group of
“Complex drilling works” trust, SOCAR
Hereby we,[full name of the applicant consignor (Contractor) is specified]confirm the intent of participation in an open competition No. 26003-17 announced by “Complex drilling works” trust, SOCAR for purchasing Chemical reagents.
At the same time, we confirm the absence of any cancellation or bankruptcy procedures, activity interruption in relation to [full name of the applicant consignor (Contractor) is specified] or any situation making it’s participation impossible.
We kindly ask You to send the soft copy of an invitation to bid to the following e-mail address:______.
The contact information for propmtly responding the queries relating the documents submitted by us and other issues:
§ Contact person: ______
§ Position of the contact person: ______
§ Phone number: ______
§ Fax: ______
§ E-mail address: ______
Appendix:
1. Original of the bank document on payment of the participation fee – __ pages.
______
(name, surname, patronymic of the responsible person) (signature of responsible person)
______
(position of responsible person)
Seal
THE LIST OF PURCHASING GOODS
Sequence No. / Name of the goods / Unit of measurement / Quantity / Standards of the Goods1 / FXLS / ton / 360 / Dark brown powder that reduce the viscosity and SSG indicators in mineralized drill muds; humidity 10%, solubility percentage of the organic part – 90%; in 1% water-base muds PH- 4- 4.5 (TU 39-01-08-274-77)
25 kg paper bags
2 / Caustic soda / ton / 215 / White or semi-transparent granulas that control alkalinity of the drill mud, specific gravity is 2.13 g/cm(APİ 13-A). Amount of NaOH in technical product is 98-99%, pH=13 in 1% water-base fluid. APİ13A/APİ Q1
25 kg paper sacks
3 / CMS / ton / 213 / White or light yellow powder or fibred reagent that reduce the fluid loss ; the percentage of the mass amount in a main substance is more than 52; humidity is not more than 10 %; full solubility in water – is 99.3 %, pH=8-11 in 1.5 % solution, viscosity of 0.5% water-base drilling fluid is not more than 12mlPa.s., polysaccharide (cellulose ester) based reagent
(TU-39-05-221-766-86)
25 kg paper bags
4 / Graphite / ton / 40 / Dark, grey – black powder with metallic sheen, for increasing the lubricating properties and for reducing the friction force in drill muds; amount of carbon is 86 %, humidity is less than 2 %, amount of hydrogen ions in water-base muds is pH-6.0-8.2 (QOST 5279-74) APİ13A/APİ Q1,
800 kg sack, 20 kg bags
5 / KGR / ton / 40 / Powdery substance for reducing the fluid loss and viscosity of drill mud, humidity is 28 %, mass percent of caustic soda is 28 %, flash point is 6800C,pH of 5% KQR solution is 9-9.5.TU39-01-247-76
50 kg paper sacks
6 / Glydril / ton / 144.32 / Poly Glycolic Ether admixture with lubricationg property that increase the resistibility of the wall of the well; brown liquid, specific gravity is 1.012; flash point 230°F (110°C) (PMCC),
Turbidity point 150°F (66°C) @ 3% in 10% NaCl*( APİ13A/APİ Q1)
208 liter drums
7 / KCl / ton / 772 / Potassium Chloride prevents the swelling of clay, light grey-white, density 2.020g/cm3, humidity 0.5-1%, mass percent of Potassium Chloride is 95-98% QOST 4568-95, TU 2152-013-00203944-2011, APİ13A/APİ Q1
1 ton sacks
8 / Polypac R / ton / 8.75 / Reduces the fluid loss of the drill mud, molecular weight is not less than 15 000;
white powder, specific gravity 1.5-1.6 q/sm3, the percentage of the active agent is70-100%, PH 6.5-8 in 1 % solution, solubility is 0.9-1.0. APİ13A/APİ Q1
25 kg paper sacks
9 / Polypac UL / kg / 98500 / Reduces the fluid loss of the drill mud, doesn’t effect the viscosity, molecular weight is not less than 15000;
white powder, specific gravity 1.5-1.6 q/cm3, the percentage of the active agent is70-100%, PH 6.5-8 APİ13A/APİ Q1 in 1 % solution
25 kg paper sacks
10 / Soda Ash / kg / 39000 / White color, odorless powder,
Calcium soda 99.7%
Specific gravity 2.53 g / cm3
Solubility: soluble 18% @ 210C
Applications:
Provides the calcium sedimenting in the solution while drilling the anhydride formations.
The standard requirement:
APİ13A/APİ Q1
25 kg paper sacks
11 / Citric Acid / kg / 20000 / Non-hardening white powder without bud, the mass percent of the monohydrate citric acid is 99.9%,the mass percent of the sulphate is 0.02%,
Melting temperature is 1530C.
Controlling the Alkalinity (pH) parameter,
Applications:
Citric acid, referring the industrial chemistry is used to reduce the rigidity index of the drilling mud and acts as the neutralizer in the case of interflowing of cement with drill mud.
The standard requirement:
QOST: 908-2004
APİ13A/APİ Q1
25 kg sacks
12 / Sodium bicarbonate / kg / 2000 / White-brown, NaHCO3 min 99.5%, mass percent of sodium- carbon dioxide is in the range of >0.4-0.7 , mass percent of chlorides is >0.2- 0.4 ,mass percent of the Iron (Fe) is >0.001- 0.005,
Humidity % is 0.1-0.2.
Applications: Is used for cleaning off the sodium ions in the case of contaimantion of drill mud with cement slurry
The standard requirement:
QOST: 2156-76
APİ13A/APİ Q1
50 kg sacks
13 / Spersene CF / kg / 19375 / Brown color powder ,
Specific gravity : 1.2 – 1.5 g / cm3
Ph (in 1 % solutions) is 3-4;
Solubility in water -100%
Applications:
Used as a deflocullant in water-base muds and reduces the fluid loss .
The standard requirement:
APİ13A/APİ Q1
25 kg sacks
14 / Ultracap / kg / 19675 / Granular or white powder, odorless, purity is 60-100%, adsorbs onto the clay surfaces and prevents cuttings from sticking to each other or to the shaker screens. PH-2.5-4.5% in 0.5 solution. Standard requirement: APİ13A/APİ Q1, 25 kg waterproof bags.
15 / D -D / kg / 20656 / Drilling Detergent, light blue green liquid, reduces the sticking tendency of water-sensitive shale cuttings, minimizes balling, reduces surface tension. Specific gravity -0.99-1.0q/cm3, pH ( 1% solution) – 8.2, solubility in water – 100 %, The standard requirement: APİ13A/APİ Q1
200-220 kg drums
16 / Defoam / kg / 2176 / Prevents or reduces the foaming of drill muds, flash point is 1200C, boiling point is 2440C, solubility in water is 100%,
The standard requirement: APİ13A/APİ Q1
18-24 kg cans
17 / Duovis / ton / 15.75 / High molecular weight biopolymer used for increasing viscosity of drill muds in water –base fluids, creates high reological and tixotropic properties in drill muds, cream –white color, grinded powder, relative density 1.5g/sm3
The standard requirement: APİ13A/APİ Q1
25 kg sacks
18 / Calcium chloride / ton / 371 / CaCl2-white, granular, odorless, completely soluble in water, nonflammable substance, boiling point, 1627oC, the melting point-772oC, Density 1.7 g / cm3, calcium chloride- 94-98%,
on API-13A standard
1 ton bags
19 / HRP / ton / 11.774 / Amber color, non-soluble in water, relative density 0.98-1.01q/cm3, flash point- 200oF (93oC), the freezing point - 40oF (4oC),
The standard requirement API13A/API Q1
190-220 kg drums
20 / G - Seal / ton / 42.05 / For prevention the loss circulation of drill mud and for increasing lubricating property, dark, grey-to-black powder, specific gravity is 2.19- 2.26 g / cm3,
The standard requirement APİ13A/APİ Q1
22.7 kg sacks.
21 / Durcal 130 / kg / 26000 / White powder, odorless, solubility in solution- 0.0035q / 100ml, size of more than 50% - 250 micron, relative density 2.7-2.9q / cm3, the standard requirements API13A/ API Q1
22.7 kg paper sacks
22 / Versatrol / kg / 16488 / Black, solid substance, melting point - 140-205°C, relative density-1.04 -1.06q/cm3, flash point 316oC,
The standard requirements API13A / API Q1
22.7 or 25 kg paper sacks
23 / VG - 69 / ton / 35 / White-to-brown powder, specific gravity -1.57q / cm3, increases viscosity,
The standard requirements API13A / API Q1
22.7 kg paper sacks
24 / Mİ Seal C / ton / 6,5304 / Prevents the mud loss of drill mud, fibrous, stringlike material, coarse size,
The standard requirements
APİ13A/APİ Q1
22.7 kg paper sacks
25 / Mİ Seal M / ton / 6,5304 / Prevents the mud loss of drill mud, fibrous, stringlike material, medium size,
The standard requirements
APİ13A/APİ Q1
22.7 kg paper sacks
26 / MİX II C / ton / 6,4638 / Fibrous material of coarse sizes for preventing the fluid loss in permeable formations, reduces the the differential-pressure sticking tendencies which can cause high torque and drag or stuck pipe.
the standard requirements APİ13A/APİ Q1
22.7 kg paper sacks
27 / MİX II M / ton / 6,4638 / Fibrous material of medium sizes for preventing the fluid loss in permeable formations, reduces the the differential-pressure sticking tendencies which can cause high torque and drag or stuck pipe.
The standard requirements APİ13A/APİ Q1
22.7 kg paper sacks
28 / Safe Carb Z3 / ton / 36 / White powder, odorless, solubility in solutions is 0.0035q/100ml, size of more than 50 % is 700 microns, relative density is 2.7-2.8 g/sm3, protects the porosity while opening the productive formation. the standard requirements APİ13A/APİ Q1
22.7 kg paper sacks
29 / Safe Carb 20 / kg / 22500 / White powder, odorless, solubility in solutions is 0.0035g/100ml, size of more than 50 % is 20 microns, relative density is 2.7-2.9 g/sm3, protects the porosity while opening the productive formation. the standard requirements APİ13A/APİ Q1
22.7 kg paper sacks
30 / Safe Carb 40 / kg / 22000 / White powder, odorless, solubility in solutions is 0.0035 g/100ml, size of more than 50 % is 40 microns, relative density is 2.7-2.9 g/sm3, protects the porosity while opening the productive formation. the standard requirements APİ13A/APİ Q1
22.7 kg paper sacks
31 / CaBr2 / ton / 350 / Calcium bromide is used to prevent the formation contamination during well completion works and prevents the hydration and migration of swelling clays. Density of CaBr2 -Calcium bromide is 1.65g/sm3, transperancy in 200C is <75NTU, solid particles <0.02%, water-30-60% CaBr2 =30-60%
Density of dry salt in 200C is 3.35g/sm3, solubility in water is 60%, the standard requirements APİ13A/APİ Q1
1m3 1 tanks
2