Alt Hot Keys
While in any Topo or Stakeout routine a number of features are accessible by pressing “Alt” followed by the corresponding Hot Key. Below is a list of Hot Keys arranged by routine and equipment type:
Action in Topo mode
Key / GPS / Conventional TS / Robotic TSA / Take Average Reading / Read and Store (All) / Read and Store (All)
B / Total Station Setup / Total Station Setup
C / Configure Reading / Configure Reading / Configure Reading
D / Monitor GPS / Manual Read / Leica: Toggle EDM; Others: Manual Read
E
F / Freeze Points / Freeze Points / Freeze Points
G / Start/Stop Interval Recording / Start/Stop Interval Recording
H / Help / Help / Help
I / Inverse / Inverse / Inverse
J / Sokkia Motorized: Joystick / Joystick
K / Calculator / Calculator / Calculator
L / Feature Code List / Feature Code List / Feature Code List
M / View Map / View Map / View Map
N
O / Offset Point Collection / Offset Point Collection / Offset Point Collection
P / List Points / List Points / List Points
Q / Toggle Prompt for Hgt/Desc / Toggle Prompt for Hgt/Desc / Toggle Prompt for Hgt/Desc
R / Read / Read and Store
S / Store / Store / Store
T / Traverse / Traverse
U
V / View Raw File / View Raw File / View Raw File
W / Write Job Notes / Write Job Notes / Write Job Notes
X / Exit to Main Menu / Exit to Main Menu / Exit to Main Menu
Y / Toggle Graphics/Text Mode / Toggle Graphics/Text Mode / Toggle Graphics/Text Mode
Z / Zoom to Point / Zoom to Point / Zoom to Point
Action in Stakeout mode
Key
/ GPS / Conventional TS / Robotic TSA
B / Total Station Setup / Total Station Setup
C / Configure Reading / Configure Reading / Configure Reading
D / Monitor GPS / Leica: Toggle EDM
E / Set Target Elevation / Set Target Elevation / Set Target Elevation
F / Freeze Points / Freeze Points / Freeze Points
G
H / Help / Help / Help
I / Inverse / Inverse / Inverse
J / Sokkia Motorized: Joystick / Joystick
K / Calculator / Calculator / Calculator
L / Feature Code List / Feature Code List / Feature Code List
M / View Map / View Map / View Map
N / Next Point/Station to Stake / Next Point/Station to Stake / Next Point/Station to Stake
O
P / List Points / List Points / List Points
Q
R / Read / Read and Store
S / Store / Store / Store
T
U
V / View Raw File / View Raw File / View Raw File
W / Write Job Notes / Write Job Notes / Write Job Notes
X / Exit to Main Menu / Exit to Main Menu / Exit to Main Menu
Y / Toggle Graphics/Text Mode / Toggle Graphics/Text Mode / Toggle Graphics/Text Mode
Z / Zoom to Point / Zoom to Point / Zoom to Point
There are also some Hot Keys that are accessible from the Main Menu. These are:
H Help
J Robotic Joystick (Robotic TS and Sokkia Motorized only)
W Write Job Note
The ‘?’ character can be used in any field that requires a numerical entry to access the Calculator. (The Sokkia SDR8100 is an exception. This device uses the ‘=’ symbol.)