MOHAMMED ATHER UDDIN QUADRI

Email:

Mobile: +91-9700169283

Post Applied For Instrumentation Engineer

Objective:

Looking for a challenging role and a rewarding career in the field of Electronics and Instrumentation in a reputed organization that gives ample opportunities for growth and professional excellence.

Profile:

  • Having experience in calibration of various measuring instruments like, flow meter, digital temperature scanner, Temperature Indicator and controller, level indicator and level gauge, pressure transmitter, pressure gauge.
  • Experienced in maintenance of flow meters, level transmitters, temperature transmitters and controllers, pressure transmitters and gauges.
  • Experienced in installation of temperature sensors, proximity sensors PH meter.
  • Experienced in calibration and maintenance of PH meter, conductivity meter & oxygen analyzer.
  • Experienced in installation of door interlocking system.

Sound knowledge of relay wiring and termination & cable tray.

  • Testing and terminations of all cables and cable gladding.
  • Strong knowledge of procedure such as plan drawing, engineering data sheet, cable schedule, trenching details layout, hookup, junction box detailspanel termination details.
  • Installation of all field instruments as per P&I diagrams such as cabling of Temp elements such as RTD, Thermocouple from field to control room through JB’s and transmitters.
  • Experience in calibration and troubleshooting of control valve either air to open (or) air to close valve and its connecting parts i.e., I/P converter, positioner, air filter regulator and a diaphragm in actuator zone of MAKE: Fisher, Forbes Marshall, Rotex and young tech.
  • Maintenance of air compressor of [MAKE: Ingersoll rand, ELG] & Power cylinder, solenoid valves, limit switches, indicators and gauges etc.

Experience:

Company:Mentor Engineering & Project Management

Position:Junior Engineer

Duration:1 year (2010 - 2011)

Company:Nasha Automation

Position:DCS Operator

Duration:2 years (2014 – Till Date)

Job Description:

  • Preparing and agreeing project budgets, timescales and specifications with clients/managers
  • Undertaking relevant research
  • Producing and implementing designs
  • Creating test procedures
  • Testing, evaluating, modifying products/instruments
  • Writing reports and documentation
  • Analyzing and interpreting data
  • Providing technical support
  • An ability to work under pressure while keeping to tight deadlines is an advantage.
  • Successfully completed Trouble shooting process in handling PLC(Siemens 500) and as well as Omron PLC and Allen Bradley (SLC 500)
  • Trouble shooting of AC and DC panels wiring.
  • Preparation of all test reports which includes instruments calibration report, cable contiguity checking report and loop checking report.
  • PLC using in relay logics and ladder logic (LD), Functional block diagram (FBD).
  • PLC Programming in timer, counter configuration and instruction set.
  • PLC Programming in PID mode and PLC using analog IOs, memory bit IOS addressing.
  • PLC Interfacing in MMI and SCADA.
  • SCADA input and output driver configuration and interfacing with PLC.
  • VFD working in commissioning and NO load test.
  • VFD checking load in rated voltage, current and RPM.

Job Responsibilities: (Maintenance, Calibration, Construction and pre commissioning):

Worked on temperature transmitter:

  • Yokogawa-YTA-50,310,320
  • Rosemount-248,248r,644r,644m
  • Honeywell STT-250,350

Worked on Differential Pressure Transmitters:

  • Yokogawa-EJX-110A
  • Honeywell-STD-924(All 900 series )
  • Rosemount-Model-115

Worked on Flow Transmitters:

  • Yokogawa-EJX-110A
  • Orifice ventury nozzle flow transmitters
  • Pitot Tube Flow Transmitters
  • Electromagnetic Flow Transmitters
  • Thermal Flow Transmitters
  • Ultrasonic Flow Transmitters
  • Vortex Flow Transmitters
  • Coriollis Flow Transmitters

Worked on Level Transmitters:

  • Capacitive Level Transmitters
  • Radio Metric Interface Level Transmitters
  • Tank Guage Level Transmitters
  • Preparation of Remote and Local Loop Folders.
  • Acquaint with QC test check record required during Pre-commissioning stages.
  • Familiar with Calibration of Instruments:
  • Temperature bath, Temperature infrared, T. Calibrator &T.Guage, T R X multi calibrator,
  • Megger test Instruments, Loop Calibrator,
  • Hydraulic pressure calibrator, DRUCK pressure calibrator, Digital pressure indicator, Dead weight tester,
  • Knowledge of operating 375 Hart Communicator
  • Understanding of ILD(Instrument loop diagram) and P&ID(Process and Instrumentation Design)
  • Aware of all the safety aspects of the plant such as permit procedures and working conditions
  • Having experience in trouble shooting of PLC’s & DCS.
  • Successfully completed Trouble shooting process in Ash handling PLC(Siemens 500) and as well as Omron PLC and Allen Bradley (SLC 500)
  • Trouble shooting of AC and DC panels wiring.
  • Preparation of all test reports which includes instruments calibration report, cable contiguity checking report and loop checking report.
  • PLC using in relay logics and ladder logic (LD), Functional block diagram (FBD).
  • PLC Programming in timer, counter configuration and instruction set.
  • PLC Programming in PID mode and PLC using analog IOs, memory bit IOS addressing.
  • PLC Interfacing in MMI and SCADA.
  • SCADA input and output driver configuration and interfacing with PLC.
  • VFD working in commissioning and NO load test.
  • VFD checking load in rated voltage, current and RPM.
  • Having experience in calibration of various measuring instruments like, flow meter, digital temperature scanner, Temperature Indicator and controller, level indicator and level guage, pressure transmitter, pressure gauge.
  • Experience in Calibration of POV indicator.
  • Having an experience in installation of door interlocking system.(installation and maintenance of door interlocking system)
  • Testing of Protective Relays for various needs. Experience with relays
  • Cable tray installation under access floor.
  • Testing and terminations of all cables and cable gladding
  • Easy understanding the procedure like plan drawing, engineering data sheet, cable schedule and trenching details layout, hookup, junction box details, and panel termination details
  • Installation of all field instruments as per P&I diagrams such as cabling of Temp elements such as RTD, Thermocouple from field to control room through JB’s and transmitters
  • Experience in calibration and trouble shooting of control valve either air to open (or) air to close valve and its connecting parts i.e., I/P converter, positioner, air filter regulator and a diaphragm in actuator zone of MAKE: Fisher, Forbes Marshall, Rotex and young tech.
  • Maintenance of air compressor of [MAKE:Ingersoll rand, ELG] & Power cylinder, solenoid valves, limit switches, indicators and gauges etc.

Education:

  • B.E (Electronics and Instrumentation): Osmania University
  • Diploma (Electronics and Instrumentation): State Board of Technical and Educational Training.

Technical Skills:

  • PLC (Programmable Logic Controllers) & DCS (Distributed Control System) - Programming languages such as LD (Ladder Diagram) & FBD (Functional Block Diagram)
  • Hands on Practical exposure in brands as Siemens, AB (Allen Bradley), ABB (Asia Brown Boveri), GE-Fanuc, Keyence, Omron,
  • SCADA (Supervisory Control & Data Acquisition) – Screen designing, PLC interface, Data collection & storage
  • HMI (Human Machine Interface) - Screen designing, PLC interface, DCS interface
  • VFD (Variable Frequency Drive) – Commissioning and Troubleshooting
  • Pneumatics & Field Instruments ( Control Valve, Sensors, Level Transmitters, Flow Transmitters, Temperature Transmitters, Pressure Switches)
  • Interfacing between PLC & GSM modem to communicate with mobile device
  • Knowledge in Panel wiring
  • Knowledge in PID (ProportionalIntegralDerivative)
  • Troubleshooting PLC & DCS programming, Control Panel (Power wiring & Control wiring)

sing FT View Machine Edition for Control of the Sequence.

Computer Skills:

Languages: C, C++, Java, Html

Packages: Ms-office, ADCA,Basicof E-CAD

Designing Tools: Photo shop, PLC, DCS

Operating Systems: XP-2,XP-3, Vista,Window7,Windows8

Strengths:

  • Ability to understand and adapt to new concepts and environment.
  • Analytical mind with problem solving aptitude
  • Highly motivated and confident
  • Cool headed with high tolerance to stressful situations

PERSONAL PROFILE:

Father’s Name : Mohd Sami Uddin Quadri

Date of birth : 09-09-1988

Nationality : Indian

Gender : Male

Languages Known : English, Hindi and Urdu.

Permanent Address : 19-5-29/10/D/1, Mahmood nagar, Kishan Bagh, Bahadurpura, Hyderabad

Passport no : L8414484

Passport expiry : 10-04-2024

Declaration:

I hereby declare that the mentioned information is correct up to my knowledge and bear the responsibility for the correctness of above mentioned particulars.

Date: 29-01-2017

Place: Hyderabad

(MOHDATHER UDDIN QUADRI)