SECTION 105113

REFRIGERATED METAL EVIDENCE LOCKERS

This guide specification section has been prepared by Tiffin Metal Products for use in the preparation of a project specification section covering refrigerated metal security lockers. Additional guide specifications offered by Tiffin Metal Products include:

Section 10 5113.01 - Metal Vented Wardrobe Lockers

Section 10 5113.02 - Metal Personnel Lockers

Section 10 5113.03 - Metal Visitor Lockers

Section 10 5113-04 - Metal Pistol Lockers

Section 10 5113.05 - Metal Sidearm Lockers

Section 10 5113.06 - Metal Duty Bag Lockers

Section 10 5113.07 - Metal Evidence Lockers

Section 10 5113.08 - Metal Mini Lockers

The following should be noted in using this specification:

Hypertext links to specific websites are included after manufacturer names and names of organizations whose standards are referenced within the text, to assist in product selection and further research. Hypertext links are contained in parenthesis and shown in blue, e.g.:

(

Optional text requiring a selection by the user is enclosed within brackets, e.g.: "Section [090000.] [_____.]"

Items requiring user input are enclosed within brackets, e.g.: "Section [_____ - ______]."

Optional paragraphs are separated by an "OR" statement, e.g.:

**** OR ****

Sustainable requirements are included for projects requiring LEED certification, and are included as green text. For additional information on LEED, visit the U.S. Green Building Council website at

For assistance on the use of the products in this section, contact Tiffin Metal Products by calling 800-537-0983, by email at , or visit their website at

PART 1GENERAL

1.1SUMMARY

Edit the following paragraphs to include only those items specified in this section.

  1. Section Includes:
  2. Refrigerated metal security locker units with hinged doors.

Coordinate the following paragraphs with other sections in the project manual.

  1. Related Sections:
  2. Division 01: Administrative, procedural, and temporary work requirements.

1.2REFERENCES

In the following paragraphs, retain only those reference standards that are used elsewhere in this section.

  1. ASTM International (ASTM) ( A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip.

1.3SYSTEM DESCRIPTION

Edit the following paragraphs to suit project requirements. Refer to current Tiffin Metal Products literature or website for availability of lockers in various sizes and configurations.

  1. Metal Lockers:
  2. Configuration: [Pass-through.] [Non-pass-through.]

Include the following for 39 inch high lockers.

  1. Number of inserts: [4.] [6.]
  2. Size: 24 inches wide x [24] [28] inches deep x 39 inches high.

**** OR ****

  1. Number of inserts: [12.] [15.] [18.]
  2. Size: 36 inches wide x [24] [28] inches deep x 82 inches high.

1.4SUBMITTALS

Limiting submittals to only those actually required helps to minimize liability arising from the review of submittals. Minimize submittals on smaller, less complex projects.

Include the following for submission of shop drawings, product data, and samples for the Architect's review.

  1. Submittals for Review:
  2. Shop Drawings: Include dimensioned plans and elevations showing locker layout and relationship to adjacent construction.
  3. Product Data: Manufacturer's descriptive data.

Include the following for submission of sustainable design submittals.

  1. Sustainable Design Submittals:
  2. Recycled Content.
  3. Regional Materials.

1.5QUALITY ASSURANCE

The following two paragraphs specify a minimum level of experience required of the parties performing the work of this section. Retain if required, and edit to suit project requirements.

  1. Manufacturer Qualifications: Minimum [10] [__] years [documented] experience in work of this Section.
  1. Installer Qualifications: Minimum [2] [__] years [documented] experience in work of this Section.

Edit the following to indicate applicable accessibility code.

  1. Accessibility: Conform to [applicable accessibility code] [____] for accessible locker units.

1.6WARRANTIES

  1. Provide manufacturer’s 5 year warranty against defects in materials and workmanship.

PART 2PRODUCTS

2.1MANUFACTURERS

  1. Products are based upon Refrigerated Evidence Lockers as manufactured by Tiffin Metal Products and distributed by Storage Systems USA (, 800-698-8990)

Edit the following to indicate whether or not substitutions will be permitted for the products in this section.

2.2MATERIALS

  1. Stainless Steel:
  2. ASTM A167, Type 304 and 430, rollable temper.
  3. Recycled content: Minimum 60 recycled stainless steel, with minimum 60 percent classified as post consumer.

2.3FABRICATION

  1. Construction:
  2. Stainless steel interior and exterior construction.
  3. High density HFC and HCFC-free urethane foam insulation.
  1. Components:

In the following select 1/4 HP for 39 inch high lockers and 1/3 HP for 82 inch high lockers.

  1. Condenser: [1/4] [1/3] HP.
  2. Voltage: 115 VAC, 60 Hz, dedicated 15 amp circuit.
  3. Automatic defrost.
  4. Condensation removal.
  5. Industrial grade, hermetically-sealed compressor.
  6. Forced air circulation.
  7. Temperature control.
  8. Digital thermometer.
  9. Audible alarm.

Include the following for pass-through style lockers.

  1. Doors:
  2. Louverless, self-closing, 180 degree opening main doors, 90 degree opening interior doors.
  3. Customer side:
  4. Main door keyed; interior doors drop keyed.
  5. Furnish [one key] [[____] keys] per lock and [one master key.] [[____] master keys.]
  6. Control side: Keyed; furnish [one key.] [[____] keys.]
  7. Full-height door.
  8. Control locking mechanisms not accessible from customer side.
  9. Number plates: Manufacturer’s standard, sequentially numbered.

**** OR ****

Include the following for non-pass-through style lockers.

  1. Doors:
  2. Louverless, 180 degree opening main doors, 90 degree opening interior doors.
  3. Main door keyed; interior doors drop keyed.
  4. Furnish [one key] [[____] keys] per lock and [one master key.] [[____] master keys.]
  5. Number plates: Manufacturer’s standard, sequentially numbered.

2.4FINISHES

  1. Stainless Steel: Satin.

PART 3EXECUTION

3.1INSTALLATION

  1. Install in accordance with manufacturer's instructions and approved Shop Drawings.
  1. Set plumb, level, and aligned.

3.2ADJUSTING

  1. Adjust doors and latches to operate correctly.

END OF SECTION

Tiffin Metal Products10 5113-1Refrigerated Metal Security Lockers

08/19/10